January 26, 2022, 12:43:30 AM
collapse

Recent Posts

Pages: [1] 2 3 ... 10
1
RockAuto / How to Find Wholesaler Closeout Parts at RockAuto
« Last post by RockAuto on January 24, 2022, 04:42:26 PM »
Wholesaler Closeout parts are our "clearance rack."   The parts were acquired at discounted prices from companies liquidating inventory (because they were overstocked, decided to carry a different brand, went out of business, etc.)  and are new but may be older inventory ("last year's style").



To see a full list of all the Wholesaler Closeout parts available for your vehicle(s) that can probably all ship in the same box, click the RSS icon after selecting your vehicle
2
Troubleshooting / Heated seats not working
« Last post by Mac442 on January 21, 2022, 09:45:08 PM »
On my 2013 MKS, strange issue with the heated/cooled seats. My heated seats were not getting hot, I heard the click under the seat when I hit the button but no heat. The passenger side would click when I hit the button, but the drivers side would click off after about 30 seconds. I replaced the control module under the passenger seat and heated seats worked at first.  When I shut the car off, restarted and hit the heat I got nothing, not even a click. I took the connectors off the module again and checked for burnt terminals, none, and reinstalled. Same thing, seats came and stayed on, until I shut off ignition. Any thoughts?
3
Maintenance, Fluids, and Technical Articles / Re: RDU puking oil again
« Last post by jman on January 21, 2022, 03:39:43 PM »
I had a bad breather on a Sienna AWD, dealer wanted to replace axle seals for more than $1k. I'm thinking that if your breather is not opening at the right internal pressure (caused by heat and expansion), it might be spilling out oil if it only opens at an "elevated" pressure. If that is the case, all you need is to get a new one.
Not sure if driving without it to test it will cause even more oil to leak out.
4
New Member Introductions / Re: Hi all!!
« Last post by Macgyver on January 19, 2022, 11:08:28 AM »
Welcome !!!


We have a few members that heavily Mod the ExSport.
5
On the moogs. I tightened them down as tight as they would go. You shouldn't need a crowsfoot. I did it with a 11mm on the stud and a long wrench. However my issue was not caused by loose ball joints. The moog lcas came with subpar forward bushings from factory without metal spacers and no matter how tight you go with the bolt the bushing barely contacts the frame and allows too much lateral movement.
6
Maintenance and Troubleshooting / Re: Turbo replacement
« Last post by Macgyver on January 11, 2022, 11:36:28 AM »
which turbo you are replacing will determine how much labor it will take. one takes 2 hrs, the other 6.
The left side. I can hear the turbo bearings rattling around when i start the car, of course dumping white smoke like crazy as well. Any tips/other parts to buy on the replacement you can think of? I

If you are going to do one. Do both. Its more labor and money but worth it for peace of mind.
7
Maintenance and Troubleshooting / Drivers headlight turns off while driving
« Last post by Mml665 on January 10, 2022, 08:51:10 AM »
Thank you Shodded
8
General Discussion / Any forum members mount snow tires on MKS/SHO
« Last post by Mml665 on January 10, 2022, 08:43:03 AM »

Very nice I'll keep an eye out, I have a 2016 Shadow black SHO, no tint just yet, but my fender badges are paint matched, other wise would be hard to tell, there's tow other black SHO's just in my neighborhood haha.

If you decide to tint your windows check out DJ
9
well, that's NOT good.  sorry to hear :(  P3 has disappeared, the building they were in has been shut down.  no idea what happened.
10
Vehicle Builds / Re: First SHO With Direct Port Methanol injection!!
« Last post by SHOdded on January 10, 2022, 07:49:53 AM »
haven't seen Z around for quite a while.  i will try to contact him, but can't make any promises ...
Pages: [1] 2 3 ... 10

SimplePortal 2.3.5 © 2008-2012, SimplePortal