Ecoboost Performance Forum

Ecoboost Performance => Performance => Topic started by: WinPlaceSHO on March 29, 2020, 10:06:53 AM

Title: Ethanol analyzer
Post by: WinPlaceSHO on March 29, 2020, 10:06:53 AM
Ok, what is the red part called on this, I'll need a new one because when I touched it I broke it, and how do I get it apart to add the ethanol analyzer?

Thanks! (https://uploads.tapatalk-cdn.com/20200329/b555903399ee82259b90592cb5f4188c.jpg)

Sent from my SM-N960U using Tapatalk

Title: Re: Ethanol analyzer
Post by: ridered74 on March 29, 2020, 02:22:34 PM
Quote from: WinPlaceSHO on March 29, 2020, 10:06:53 AM
Ok, what is the red part called on this, I'll need a new one because when I touched it I broke it, and how do I get it apart to add the ethanol analyzer?

Thanks! (https://uploads.tapatalk-cdn.com/20200329/b555903399ee82259b90592cb5f4188c.jpg)

Sent from my SM-N960U using Tapatalk

Watch some youtube videos on disconnecting fuel lines. Helps to have a fuel line disconnect tool You can get a set at harbor freight for 10 bucks or so.

That red piece is a clip and there should be a second one on the underside. I believe before broken, the red pieces on top and bottom are actually one piece but I don't remember for sure. There is a push tab that releases it and allows it to slide out. After that you use a fuel line disconnect tool to disconnect the fuel line.
Title: Re: Ethanol analyzer
Post by: WinPlaceSHO on March 29, 2020, 04:44:32 PM
Ok, my "Google-Fu" wasn't working yesterday, but I finally found it -- Common fuel connectors.  There is that red retaining clip, then you just push on the one side, and it comes off.  Now I just have to figure out what that red retaining clip is called so I can get it replaced.   
Title: Re: Ethanol analyzer
Post by: FiveLeeter918 on May 29, 2020, 01:39:45 AM
The red clip has no function other than to say "hey, I'm important, are you sure you want to remove me?"

Remove it, then push in on that rectangle on the underside and it will pull off.
EhPortal 1.39.5 © 2024, WebDev