Ecoboost Performance Forum

Detailing, SYNC, AV, Security, Electrical, and Lighting => Exterior Modifications => Topic started by: Big_kat on May 22, 2021, 12:51:20 PM

Title: Looking for affordable wheels
Post by: Big_kat on May 22, 2021, 12:51:20 PM
Ran across these wondering if they're gonna work on a '13 MKS. Any advice is greatly appreciated.

https://www.americanmuscle.com/charcoal-amr-20x85-2015.html

(https://i.ibb.co/Svk5F1L/65-CFEBBF-D0-CF-4-D5-A-904-F-A3-A8361-F91-C1.jpg) (https://ibb.co/Svk5F1L)

(https://i.ibb.co/ggM0dWp/5-A889-A5-E-ED1-B-42-A6-9703-19741-A5-CDC71.jpg) (https://ibb.co/ggM0dWp)

(https://i.ibb.co/Svk5F1L/65-CFEBBF-D0-CF-4-D5-A-904-F-A3-A8361-F91-C1.jpg) (https://ibb.co/Svk5F1L)

(https://i.ibb.co/ggM0dWp/5-A889-A5-E-ED1-B-42-A6-9703-19741-A5-CDC71.jpg) (https://ibb.co/ggM0dWp)
Title: Re: Looking for affordable wheels
Post by: Macgyver on May 22, 2021, 07:35:58 PM
They will look good thats for sure.

This is what you have.

https://www.wheel-size.com/size/lincoln/mks/2013/#trim-35i-usdm-365
Title: Re: Looking for affordable wheels
Post by: Dannymack on May 24, 2021, 11:32:32 PM
They should be just about right. Front stock wheels need about 15-17mm less offset to be flush and this set will bring you out 14ish mm. Should look good.
Title: Re: Looking for affordable wheels
Post by: Big_kat on May 25, 2021, 07:03:55 PM
Dannymack Thankyou, I think I ran across you car on some FB group, that thing looks sick! Gave me a lot of ideas ha. Does anyone happen to know where I ca buy the hub adaptor rings? I'm having a hard time tracking them down.
Title: Re: Looking for affordable wheels
Post by: Dannymack on May 25, 2021, 10:03:30 PM
Quote from: Big_kat on May 25, 2021, 07:03:55 PM
Dannymack Thankyou, I think I ran across you car on some FB group, that thing looks sick! Gave me a lot of ideas ha. Does anyone happen to know where I ca buy the hub adaptor rings? I'm having a hard time tracking them down.


Thanks!


For the hub rings where does it say the size of the hub on those wheels? I can't find the measurements.
Title: Re: Looking for affordable wheels
Post by: Big_kat on May 25, 2021, 10:18:22 PM
It doesn't, I'm assuming they're 70.5 mm because those wheels are for a 15-21 mustang. I know those specific adaptors are made, I'd just like to know the best ones
Title: Re: Looking for affordable wheels
Post by: Big_kat on May 29, 2021, 08:42:28 PM
Well, shipping was super fast.
(https://i.ibb.co/LzPNjwm/B9-E1-D474-C513-409-D-903-C-29-A8624-C2-F8-E.jpg) (https://ibb.co/LzPNjwm)
Title: Re: Looking for affordable wheels
Post by: Macgyver on May 30, 2021, 01:34:15 PM
Very Nice looking wheels.
Title: Re: Looking for affordable wheels
Post by: Big_kat on May 30, 2021, 11:39:16 PM
Waiting on the hub adaptors and lug nuts. But I think it's gonna look good.
(https://i.ibb.co/5cHCh4L/F13-FED58-5835-4-D23-9349-A5-B61-E9560-A6.jpg) (https://ibb.co/5cHCh4L)
Title: Re: Looking for affordable wheels
Post by: Big_kat on June 04, 2021, 01:27:13 PM
I'm happy with them.
(https://i.ibb.co/wLyBB6K/3613-B1-CF-9-C09-4-ADA-80-B0-98-F1-C12-E0206.jpg) (https://ibb.co/wLyBB6K)
Title: Re: Looking for affordable wheels
Post by: Macgyver on June 04, 2021, 03:37:08 PM
Very Nice.

Any weight savings ?
Title: Re: Looking for affordable wheels
Post by: Dannymack on June 04, 2021, 04:52:18 PM
Nice. How close are they to flush?
Title: Re: Looking for affordable wheels
Post by: Big_kat on June 06, 2021, 12:42:43 PM
The new wheels weigh 29.4 lbs, the stock wheels were 39.6, so yeah, cuts about 40lbs total. As far as being flush, I think another 10mm  would be awesome, but I can't complain. Is there a difference in track width front and rear? The rears seem closer to flush.
(https://i.ibb.co/6FMSFdC/63-F9-D841-1222-4-FA3-A9-FB-AB7-BE5-BBD0-CF.jpg) (https://ibb.co/6FMSFdC)

(https://i.ibb.co/HXcRQgX/269789-A5-F487-4522-B7-AB-63-A54-F4-E757-E.jpg) (https://ibb.co/HXcRQgX)

(https://i.ibb.co/wJBrBX6/BAD8966-F-C627-4-D2-A-AB64-80-FEBC1-FBD73.jpg) (https://ibb.co/wJBrBX6)
Title: Re: Looking for affordable wheels
Post by: Macgyver on June 06, 2021, 04:19:01 PM
Quote from: Big_kat on June 06, 2021, 12:42:43 PM
The new wheels weigh 29.4 lbs, the stock wheels were 39.6, so yeah, cuts about 40lbs total. As far as being flush, I think another 10mm  would be awesome, but I can't complain. Is there a difference in track width front and rear? The rears seem closer to flush.
(https://i.ibb.co/6FMSFdC/63-F9-D841-1222-4-FA3-A9-FB-AB7-BE5-BBD0-CF.jpg) (https://ibb.co/6FMSFdC)

(https://i.ibb.co/HXcRQgX/269789-A5-F487-4522-B7-AB-63-A54-F4-E757-E.jpg) (https://ibb.co/HXcRQgX)

(https://i.ibb.co/wJBrBX6/BAD8966-F-C627-4-D2-A-AB64-80-FEBC1-FBD73.jpg) (https://ibb.co/wJBrBX6)


Can you feel the " 40 " ? The Land Yacht should feel a little livelier.
Title: Re: Looking for affordable wheels
Post by: Big_kat on June 07, 2021, 04:39:46 PM
Not so much, I think saving 40 lbs of rotating mass on a 3000lb car vs a 4500lb car would be much more noticeable ha.
Title: Re: Looking for affordable wheels
Post by: Dannymack on June 09, 2021, 12:38:08 AM
If you're doing spacers to make them flush the rear usually needs about 5mm more than the front in my experience.
Title: Re: Looking for affordable wheels
Post by: FoMoCoSHO on July 04, 2021, 02:33:15 PM
Quote from: Dannymack on May 24, 2021, 11:32:32 PM
They should be just about right. Front stock wheels need about 15-17mm less offset to be flush and this set will bring you out 14ish mm. Should look good.
Is this the same for 2010-12?



Title: Re: Looking for affordable wheels
Post by: Dannymack on July 04, 2021, 05:13:36 PM
Quote from: FoMoCoSHO on July 04, 2021, 02:33:15 PM
Quote from: Dannymack on May 24, 2021, 11:32:32 PM
They should be just about right. Front stock wheels need about 15-17mm less offset to be flush and this set will bring you out 14ish mm. Should look good.
Is this the same for 2010-12?


This I'm not sure of. Haven't measured those out.
EhPortal 1.39.5 © 2024, WebDev