Yeah I realized that before I bolted it down but I was just doing a test fit to see if I had any clearance issues.
Mishimoto - MMINT-UJB Universal Intercooler J-Line, Black - $257.52
(1) HPS AJ400-225 6061 T6 Aluminum Joiner Tubing with Bead Roll, 16 Gauge, 4" Length, 2.25" OD, 0.065" Wall Thickness - $16.43
(1) HPS AJ300-250 6061 T6 Aluminum Joiner Tubing with Bead Roll, 16 Gauge, 3" Length, 2.5" OD, 0.065" Wall Thickness - $16.50
(2) Ispeedytech 2.5" Performance 90 Degree Tight Radius hose Cast Aluminum Turbo Elbow pipe 63 mm - $16.99/each
(3) 2.5" ID Straight Silicone Hose Coupler, High Temp 4-Ply Reinforced - 131-06303-0401 - Ticon Industries - $7.45/each
(1) Mishimoto 2.25" to 2.5" Silicone Transition Coupler, Black - $11.00
$357.78 total without taxes and shipping was free.
I did quite a bit of cutting of the shroud but I don't see any detrimental effects of doing so. Also I only went with the Mishimoto fitting because the HPS brand wouldn't of gotten here during the time I wanted to install, not like it matters at all.