Instead of starting a new topic I'll post in here as it pertains to the install and adjustment of the coilovers.
I finally got around to starting the install of the kit today after much procrastination. I decided to do the rear end first. I set both adjustable coils to the same on both sides, buttoned it all up and dropped it down only to realize that the driver side was much lower than the other side. So I bounced the rear suspension and tried to get the rear to settle a bit and then took it out for a drive. When I got back it was still way lower on driver side (roughly an inch ). I adjusted the driver side coil more and more trying to even it out to the point now where I am roughly and inch now from the bottom of the sleeve ... and on the other side I am roughly an inch or so from the top.
Anybody else have this issue? I have not seen this much difference in other cars I have lowered.