June 19, 2019, 08:14:48 PM
collapse
collapse

Author Topic: Had a tiny exhaust leak....  (Read 256 times)

Offline Gray Brick

  • Sr. Member
  • : Southern California
  • Thank You
  • -Given: 32
  • -Received: 78
  • Posts: 390
  • Gray Brick
Had a tiny exhaust leak....
« on: May 18, 2019, 12:40:47 AM »
I was getting a startup tick and thought it was my chain...

Amazing it wasn't louder and went away after startup.
2013 Ecoboost Ford Flex
AJP Tune (ATP+2) in progress , Livernois HPFP, 3 Bar MAP, UPR Catch Can, 100% Methanol w/ braided steel lines, 3" Downpipes -->2.5" X-pipe --> 2.5" Magnaflow exhaust, 2.5" air inlets to each turbo with cone filter, Custom water to air intercooler with chiller
275/40-20 Front 315/35-20 Rear Tires
---7.931/90.76MPH @ 5150 lbs in the 1/8th---

Offline SHOdded

  • Administrator
  • Elite Member
  • : Beltsville, MD
  • Thank You
  • -Given: 11045
  • -Received: 3663
  • Posts: 15108
Re: Had a tiny exhaust leak....
« Reply #1 on: May 18, 2019, 03:12:02 AM »
Don't see those busted too often, must be all the power you are forcing through there :D

Glad it was a simple fix.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Offline Gray Brick

  • Sr. Member
  • : Southern California
  • Thank You
  • -Given: 32
  • -Received: 78
  • Posts: 390
  • Gray Brick
Re: Had a tiny exhaust leak....
« Reply #2 on: May 18, 2019, 08:23:01 AM »
Still a PITA to take everything apart on jack stands.

I wonder if it was bad enough to throw off my fuel trims.

Under hood heat also started to become a problem.
2013 Ecoboost Ford Flex
AJP Tune (ATP+2) in progress , Livernois HPFP, 3 Bar MAP, UPR Catch Can, 100% Methanol w/ braided steel lines, 3" Downpipes -->2.5" X-pipe --> 2.5" Magnaflow exhaust, 2.5" air inlets to each turbo with cone filter, Custom water to air intercooler with chiller
275/40-20 Front 315/35-20 Rear Tires
---7.931/90.76MPH @ 5150 lbs in the 1/8th---

Offline StealBlueSHO

  • Elite Member
  • Thank You
  • -Given: 2232
  • -Received: 2191
  • Posts: 3506
  • I poke at BPD1151
Re: Had a tiny exhaust leak....
« Reply #3 on: May 18, 2019, 08:26:07 AM »
Still a PITA to take everything apart on jack stands.

I wonder if it was bad enough to throw off my fuel trims.

Under hood heat also started to become a problem.

Did you reuse the gasket when you swapped the turbos? That could have caused that problem...always best to replace gaskets that are in very high heat area's when swapping parts.
2016 Taurus SHO PP, Gearhead Tuned, Gearhead Upgraded Gen3 Turbos, XDI-35 HPFP, Gearhead Intercooler, EPP Catted/Thermal coated DP's, Corsa Exhaust, HR Springs, Airaid Intake, EPP Hotpipes, Gearhead 170F Tstat, 3BAR Map, UPR CSS Catch Can, MSD Blaster Coils, Upgraded Torque Mounts, Fuel-IT BT Ethanol Analyzer, SP-542's.

484awhp/496awtq

Best of 12.192 @ 113.80 Gearhead E30 Tune - Pre-Turbo/DP/Torque Mount Upgrades.

Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • : New York SHO
  • Thank You
  • -Given: 1483
  • -Received: 3321
  • Posts: 2334
  • Trap Speed of almost 116 mph.
Re: Had a tiny exhaust leak....
« Reply #4 on: May 18, 2019, 09:44:43 AM »
The very reason I aways recommend to change the Gaskets especially being close to 500 deg exhaust heat!
Definitely would of thrown your Fuel trims off!
Glad you caught in time.  Z
« Last Edit: May 18, 2019, 09:49:30 AM by ZSHO »


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|Airaid-Dry-flow-CAI|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline Gray Brick

  • Sr. Member
  • : Southern California
  • Thank You
  • -Given: 32
  • -Received: 78
  • Posts: 390
  • Gray Brick
Re: Had a tiny exhaust leak....
« Reply #5 on: May 20, 2019, 12:05:05 PM »
I changed all gaskets when the turbos were replaced.

I am assuming the bolts from the turbo to the manifold became loose and created a small leak that became larger and larger.
2013 Ecoboost Ford Flex
AJP Tune (ATP+2) in progress , Livernois HPFP, 3 Bar MAP, UPR Catch Can, 100% Methanol w/ braided steel lines, 3" Downpipes -->2.5" X-pipe --> 2.5" Magnaflow exhaust, 2.5" air inlets to each turbo with cone filter, Custom water to air intercooler with chiller
275/40-20 Front 315/35-20 Rear Tires
---7.931/90.76MPH @ 5150 lbs in the 1/8th---

Offline SHOdded

  • Administrator
  • Elite Member
  • : Beltsville, MD
  • Thank You
  • -Given: 11045
  • -Received: 3663
  • Posts: 15108
Re: Had a tiny exhaust leak....
« Reply #6 on: May 20, 2019, 02:17:50 PM »
Yes, that could very well be true.  Just like Ford says with wheels, checking the bolts a couple hundred miles after install is a must.  Dunno if loctite would have helped any.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • : New York SHO
  • Thank You
  • -Given: 1483
  • -Received: 3321
  • Posts: 2334
  • Trap Speed of almost 116 mph.
« Last Edit: May 20, 2019, 02:55:51 PM by ZSHO »


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|Airaid-Dry-flow-CAI|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline Gray Brick

  • Sr. Member
  • : Southern California
  • Thank You
  • -Given: 32
  • -Received: 78
  • Posts: 390
  • Gray Brick
Re: Had a tiny exhaust leak....
« Reply #8 on: May 20, 2019, 03:29:03 PM »
No sealant necessary on this one...

The factory gaskets are double wall crush type.
2013 Ecoboost Ford Flex
AJP Tune (ATP+2) in progress , Livernois HPFP, 3 Bar MAP, UPR Catch Can, 100% Methanol w/ braided steel lines, 3" Downpipes -->2.5" X-pipe --> 2.5" Magnaflow exhaust, 2.5" air inlets to each turbo with cone filter, Custom water to air intercooler with chiller
275/40-20 Front 315/35-20 Rear Tires
---7.931/90.76MPH @ 5150 lbs in the 1/8th---

Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • : New York SHO
  • Thank You
  • -Given: 1483
  • -Received: 3321
  • Posts: 2334
  • Trap Speed of almost 116 mph.
Re: Had a tiny exhaust leak....
« Reply #9 on: May 20, 2019, 06:54:55 PM »
Hmm! Here are mine! Z






2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|Airaid-Dry-flow-CAI|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

 

* Featured Topics

* Recent Topics

Re: What have you done to your Ecoboosted vehicle today?
by 5ohSHO | Today at 07:08:46 PM
Ah ok.  Yeah the flowers tend to be on the "softer" sid...
Re: 2010 Lincoln EBAP Photos
by Black Dream | Today at 06:35:32 PM
I test drove a 2011 Red version that had the exact same interior as yo...
Re: Glad to be here
by Black Dream | Today at 06:27:40 PM
Our poor dead G is being slowly parted out.  She was not my daily...
Re: Center caps on flowers
by 76fomoco | Today at 06:22:32 PM
you must have been without wheels at your location and or no batteries...
Re: Water in passenger floor
by Agentlongwood | Today at 05:48:48 PM
After all that, it didn't fix the leak lol.  It looks like m...
Re: battery terminal
by GhostlyGrenade | Today at 04:10:04 PM
Well I ordered a new battery as well as the updated rear trans mount. ...
Motircrafts SP-542 Spark plugs!
by ZSHO | Today at 03:14:45 PM
FYI- I noticed there is much interest in the SP-542 PLUGS and will be ...
2019 SHO Convention - Alternative Has Been Announced!
by SHOdded | Today at 02:53:36 PM
Since the official 2019 Convention is not happening, an alternative co...
Re: Gearhead SHO/Flex Intercooler Install Video
by Leadfoot | Today at 10:53:16 AM
I recalibrated my SHO, unfortunately with a MKS/Flex hybrid calibratio...
Re: Random thoughts for the day
by SHOdded | Today at 05:58:42 AM
Bulk shipping is expensive from the dealership.  But different de...
Re: Gearhead Intercooler Review
by avidmotion | June 18, 2019, 05:28:15 PM
....Me too....      :)...
Re: Power per mod discussion
by Black Dream | June 18, 2019, 03:31:45 PM
I could be wrong but I think he meant a Coors Light.........
Re: 2013 SHO Throttle Body Adjustment Screw Leaking?
by SHOdded | June 18, 2019, 08:57:10 AM
A nice little side project :D...
Re: R134a capacity
by Three Lions | June 18, 2019, 07:34:28 AM
Thanks guys. Most appreciated...
Re: Hotpipes, Meth Bungs and Nozzles
by shoNoff | June 18, 2019, 07:11:45 AM
I got lucky mine still had just enough sticking out so I could grab it...

Back to top