• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Engine torque struts bolt torque specs.

Started by ShelbySuperSnake, April 03, 2019, 12:20:29 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

ShelbySuperSnake

April 03, 2019, 12:20:29 PM
I just got the upgraded engine torque struts but cannot find anything online on what they are suppose to be torqued down to. Any chance anyone can link me some information in regards to them?
2013 SHO PP
3 Bar Tune

SHOdded

#1
April 03, 2019, 03:49:41 PM
Not sure which part you are trying to change?

Description                                                          Nm  lb-ft  lb-in 
Transaxle support insulator bracket-to-transaxle bolt  80   59     — 
Transaxle support insulator bracket-to-transaxle nuts  63  46     —
Roll restrictor bolts                                               103  76     — 
Roll restrictor bracket bolts                                     90  66     — 
Transaxle support insulator bolts                              55  41  — 
Transaxle support insulator bracket bolt                     80  59  — 
Transaxle support insulator bracket nuts                    63  46  — 
Transaxle support insulator through bolt                   175  129  — 

https://parts.levittownfordparts.com/auto-parts/2013/ford/taurus/sho-trim/3-5l-v6-gas-engine/engine-cat/engine-and-trans-mounting-scat



Parts 1, 8, 13, 17 are engine/trans mount related.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

ShelbySuperSnake

#2
April 03, 2019, 06:23:07 PM
Looks like it is 13 and 17, I guess Ford calls them torque arms. I always though it was just called a front and rear motor mount. I am assuming roll restrictor bolts are 16 and and 19?
2013 SHO PP
3 Bar Tune

SHOdded

#3
April 03, 2019, 08:41:11 PM
Looks like you would need 16, 18, and 19.  Although probably not torquetoyield, always good to replace fasteners exposed to the elements.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

ZSHO

#4
April 04, 2019, 06:37:42 AM Last Edit: April 04, 2019, 06:43:38 AM by ZSHO
X2- Agreed especially us folks that dwell in salt States. Z


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|
Print
Go Up Pages1
User actions