• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

First new year outing guesses 3/24

Started by Jordan, March 12, 2019, 01:57:50 PM

Previous topic - Next topic

ddlopes

2013 SHO P/P mods: EcoPower Parts dual CAI, 3 bar, PPE catted down pipe, SCT X4, 170 degree thermostat, SNOW PERFORMANCE methanol stage 3 with ProMeth staineless steel braided lines, AeroForce gauges, Hot pipes, custom boost activated cutout xpipe, tial bov, Tial Wastegate mod, GH intercooler, MSD coils, AFE throttle spacer, UPR catch can, Rovos Durban wheels, AJP tuned to 389hp and 503trq on mustang dyno

ddlopes

2013 SHO P/P mods: EcoPower Parts dual CAI, 3 bar, PPE catted down pipe, SCT X4, 170 degree thermostat, SNOW PERFORMANCE methanol stage 3 with ProMeth staineless steel braided lines, AeroForce gauges, Hot pipes, custom boost activated cutout xpipe, tial bov, Tial Wastegate mod, GH intercooler, MSD coils, AFE throttle spacer, UPR catch can, Rovos Durban wheels, AJP tuned to 389hp and 503trq on mustang dyno

ClearwaterSHO

Quote from: ddlopes on March 14, 2019, 09:04:00 AM
Is he from Massachusetts??

I have no clue. I just messaged him on FB and he responded.
2013 NON-PP SHO Tuxedo Black
Unleashed 3 Bar Tune -12.865 @ 106.5
AJP POWERED Tune - 12.59 @ 108.?

Mods: GH Intercooler, E30 Tune by AJPTurbo, SW Catless DP's, H&R Springs, MSD Coils (Is this a mod?)

ddlopes

Ok, I only ask because there's a few guys with that name on Facebook. Thank you for the info! I'll message them all if I have too .... lol
2013 SHO P/P mods: EcoPower Parts dual CAI, 3 bar, PPE catted down pipe, SCT X4, 170 degree thermostat, SNOW PERFORMANCE methanol stage 3 with ProMeth staineless steel braided lines, AeroForce gauges, Hot pipes, custom boost activated cutout xpipe, tial bov, Tial Wastegate mod, GH intercooler, MSD coils, AFE throttle spacer, UPR catch can, Rovos Durban wheels, AJP tuned to 389hp and 503trq on mustang dyno

Jordan

Might I suggest making another post for this discussion?
World's Fastest SHO Ecoboost July 2019 - Current

2020 Power Numbers - 536AWHP/647Torque

SM105K

Quote from: Jordan on March 14, 2019, 12:25:54 PM
Might I suggest making another post for this discussion?

After you go to the track would you mind making a whole new thread with a review and how to purchase them?
"M" 2013 SHO PP | AJPTurbo E30 Tune | FS HPFP | Stock IC with Ice Water DIY Sprayer | PPE Downpipes | Custom Magnaflow Resonator | 3rd Cat Delete | Derale Upgraded Trans Cooler | Dicunzolo Gen2 Trans Mounts| EPP Noisemaker Eliminator | MSD Coil Over Plugs | SP-542's | UPR Dual Valve Catch Can | K&N Drop In | Power Stop Slotted and Drilled Rotors with Stock PP Pads | H&R Springs  | AVS Flush Deflector | 802SHO Custom Splitter | Duraflex Chin Spoiler | Curva Concept C7's | Continental DWS06 Extreme Contact Rubber | 411 HP and 546 TQ |

"The Fukus" 2013 Focus ST | Boomba BOV | FSWerks Short Shifter | Power Stop Brakes | Continental DWS06 Extreme Contact Rubber |

ClearwaterSHO

2013 NON-PP SHO Tuxedo Black
Unleashed 3 Bar Tune -12.865 @ 106.5
AJP POWERED Tune - 12.59 @ 108.?

Mods: GH Intercooler, E30 Tune by AJPTurbo, SW Catless DP's, H&R Springs, MSD Coils (Is this a mod?)

limited02

Quote from: Jordan on March 13, 2019, 08:46:33 AM
Quote from: limited02 on March 12, 2019, 09:47:27 PM
I'm going with 11.81 @ 117.6 mph.  Also, how far is Heartland Motorsports Park in Topeka from you vs where you currently go?

It's about 3 hours compared to 2 hours. I'm going with my local car group to import face off otherwise my strip of preference is Ozark raceway park in rogersville mo
Ozark Raceway Park is a little over 3hrs for me.  Best of luck and looking forward to your results!

Jordan

Welp got started on the weight reduction for this time around. Planning on tin canning the car. Anything that I can get out is coming out. Already got the rear seat, all the trunk stuff and some misc plastic bits. Spent <15minutes on that stuff. Going to continue tomorrow after work and get some other things going. Then the scraping for little bits comes around. Want to do a glory run if I can before I go upgraded HPFP.
World's Fastest SHO Ecoboost July 2019 - Current

2020 Power Numbers - 536AWHP/647Torque

802SHO

Quote from: Jordan on March 21, 2019, 09:33:02 PM
Welp got started on the weight reduction for this time around. Planning on tin canning the car. Anything that I can get out is coming out. Already got the rear seat, all the trunk stuff and some misc plastic bits. Spent <15minutes on that stuff. Going to continue tomorrow after work and get some other things going. Then the scraping for little bits comes around. Want to do a glory run if I can before I go upgraded HPFP.

I'm very curious how much you can gain from this!  Don't sell yourself short though.  Isnt a glory run literally 1 pass down the track?  Then its not a glory run if you do multiple passes.  This is what test and tune days are all about IMHO and a shortcut to exceed the limitations of our inferior stock transmission.  If this was a fully built car this would be the first ever 10 sec pass accomplished with stock transmission.  Line up all the built SHO's and run them down the track.  The lightest SHO will hold the title all day long.  And if it's fully built its already exceeded its purpose of a family sedan so applying weight reduction at that point is no harm no foul in my book.  Merely for title purposes that will be the one.  And if it's all about title then one can dismiss whether or not it also wins in popularity.  It doesn't matter if you win at full weight or lightweight.  "Winning is winning"
IG @802SHO 2010 SHO non PP, Tuned by AJP Turbo, 109 Octane + VP C85 for E30, Ported GH Gen 3 upgraded turbos, Ported 13+ Exhaust Manifolds, Custom FM IC TreadStone TR10C, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks 300C LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous dual dry shots, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Phenolic Spacer, Braille Lightweight Battery, Kirky Lightweight Racing Driver Seat, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Bravado Tribute 20x9.5 + 32 offset Wheels, Nitto NT555R Front Tires, Continental Extreme Contact DW Rear Tires and all are 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, R1 Concepts Geomet slotted/drilled rotors with Heavy Duty Semi Metallic pads, Aeroforce Interceptor Gauge.
Currently World's Fastest Ecoboost SHO
11.063 @ 123.17 MPH!  NED 10/10/20

shoNoff

Good luck Jordan let her eat buddy.

I really wish people would realize not the entire world uses Facebook.
2013 SHO PP 12.51 @ 110.07 AJP tuned sold
2016 edge sport 13.92 @ 99.4 mph. slow and stock baby mobile

ClearwaterSHO

WR10 + IC + J Intake + Wheels.... I'm gonna say 11.49. Make me proud J.
2013 NON-PP SHO Tuxedo Black
Unleashed 3 Bar Tune -12.865 @ 106.5
AJP POWERED Tune - 12.59 @ 108.?

Mods: GH Intercooler, E30 Tune by AJPTurbo, SW Catless DP's, H&R Springs, MSD Coils (Is this a mod?)

SM105K

"M" 2013 SHO PP | AJPTurbo E30 Tune | FS HPFP | Stock IC with Ice Water DIY Sprayer | PPE Downpipes | Custom Magnaflow Resonator | 3rd Cat Delete | Derale Upgraded Trans Cooler | Dicunzolo Gen2 Trans Mounts| EPP Noisemaker Eliminator | MSD Coil Over Plugs | SP-542's | UPR Dual Valve Catch Can | K&N Drop In | Power Stop Slotted and Drilled Rotors with Stock PP Pads | H&R Springs  | AVS Flush Deflector | 802SHO Custom Splitter | Duraflex Chin Spoiler | Curva Concept C7's | Continental DWS06 Extreme Contact Rubber | 411 HP and 546 TQ |

"The Fukus" 2013 Focus ST | Boomba BOV | FSWerks Short Shifter | Power Stop Brakes | Continental DWS06 Extreme Contact Rubber |

Jordan

I'm pushing the limits of the stock fuel system to the max. I want to prove what this platform can do! This is my daily but I'm more than willing to take the time to get this sucker light for a day of records for myself!
World's Fastest SHO Ecoboost July 2019 - Current

2020 Power Numbers - 536AWHP/647Torque

802SHO

Jordan lives his life a quarter mile at a time. 
IG @802SHO 2010 SHO non PP, Tuned by AJP Turbo, 109 Octane + VP C85 for E30, Ported GH Gen 3 upgraded turbos, Ported 13+ Exhaust Manifolds, Custom FM IC TreadStone TR10C, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks 300C LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous dual dry shots, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Phenolic Spacer, Braille Lightweight Battery, Kirky Lightweight Racing Driver Seat, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Bravado Tribute 20x9.5 + 32 offset Wheels, Nitto NT555R Front Tires, Continental Extreme Contact DW Rear Tires and all are 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, R1 Concepts Geomet slotted/drilled rotors with Heavy Duty Semi Metallic pads, Aeroforce Interceptor Gauge.
Currently World's Fastest Ecoboost SHO
11.063 @ 123.17 MPH!  NED 10/10/20