• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

PPE DP Install shop

Started by fitnesstrainermd, March 06, 2019, 10:48:02 AM

Previous topic - Next topic
Print
Go Down Pages1 2
User actions

fitnesstrainermd

March 06, 2019, 10:48:02 AM
Can someone recommend a good shop to have the PPE DP's installed in the Alexandria VA area? 
2013 SHO PP, black, PPE Catted Downpipes, Magnaflo catback exhaust, Gearhead 93 tune, SP-542 plugs, EPP noisemaker eliminator pipe, MDesign CAI, 3-Bar,

Sbouvia

#1
March 06, 2019, 07:53:40 PM
Maybe Moore Automotive in Fairfax? I'm sure there are others.
~Scott
2013 SHO non-pp. Powerstop Top Cop kit rotors and stock Akebono Ceramic Pads, 3bar map sensor, 93 octane 3bar AJPTurbo tuned, but not dialed in.
2002 Jeep Wrangler TJ (Jane) w/ 2.5" lift, Banks torque tubes, monster exhaust and intake.
1991 F Super Duty 2.5 ton dump truck w/ 7.3IDI

SHOdded

#2
March 06, 2019, 08:06:16 PM
Have BJSHO install them for you :D He's kinda local.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Sbouvia

#3
March 06, 2019, 08:46:10 PM
Also the place BJSHO went to dyno his car down in Richmond, National Speed. The you can dyno it before and after on the linked rollers.
~Scott
2013 SHO non-pp. Powerstop Top Cop kit rotors and stock Akebono Ceramic Pads, 3bar map sensor, 93 octane 3bar AJPTurbo tuned, but not dialed in.
2002 Jeep Wrangler TJ (Jane) w/ 2.5" lift, Banks torque tubes, monster exhaust and intake.
1991 F Super Duty 2.5 ton dump truck w/ 7.3IDI

SM105K

#4
March 07, 2019, 09:08:00 AM
Quote from: SHOdded on March 06, 2019, 08:06:16 PM
Have BJSHO install them for you :D He's kinda local.

I miss BJSHO's old screen name.
"M" 2013 SHO PP | AJPTurbo E30 Tune | FS HPFP | Stock IC with Ice Water DIY Sprayer | PPE Downpipes | Custom Magnaflow Resonator | 3rd Cat Delete | Derale Upgraded Trans Cooler | Dicunzolo Gen2 Trans Mounts| EPP Noisemaker Eliminator | MSD Coil Over Plugs | SP-542's | UPR Dual Valve Catch Can | K&N Drop In | Power Stop Slotted and Drilled Rotors with Stock PP Pads | H&R Springs  | AVS Flush Deflector | 802SHO Custom Splitter | Duraflex Chin Spoiler | Curva Concept C7's | Continental DWS06 Extreme Contact Rubber | 411 HP and 546 TQ |

"The Fukus" 2013 Focus ST | Boomba BOV | FSWerks Short Shifter | Power Stop Brakes | Continental DWS06 Extreme Contact Rubber |

StealBlueSho

#5
March 07, 2019, 09:41:16 AM Last Edit: March 07, 2019, 09:45:31 AM by BJSHO
Last time I had Downpipes installed, I used my go to shop, $200 installed which I was happy to fork over so I didn't have to do it.

Murphy's Motorsports, Warrenton, VA 20186
5403596581

Mike runs the front counter and Brian is the owner.


I'm actually in the shop right now getting a custom fuel line made lol.

Sent from my iPhone using Tapatalk

SM105K

#6
March 07, 2019, 10:13:27 AM
Quote from: sm105k on March 07, 2019, 09:08:00 AM
Quote from: SHOdded on March 06, 2019, 08:06:16 PM
Have BJSHO install them for you :D He's kinda local.

I miss BJSHO's old screen name.

YES WELCOME BACK SBS!
"M" 2013 SHO PP | AJPTurbo E30 Tune | FS HPFP | Stock IC with Ice Water DIY Sprayer | PPE Downpipes | Custom Magnaflow Resonator | 3rd Cat Delete | Derale Upgraded Trans Cooler | Dicunzolo Gen2 Trans Mounts| EPP Noisemaker Eliminator | MSD Coil Over Plugs | SP-542's | UPR Dual Valve Catch Can | K&N Drop In | Power Stop Slotted and Drilled Rotors with Stock PP Pads | H&R Springs  | AVS Flush Deflector | 802SHO Custom Splitter | Duraflex Chin Spoiler | Curva Concept C7's | Continental DWS06 Extreme Contact Rubber | 411 HP and 546 TQ |

"The Fukus" 2013 Focus ST | Boomba BOV | FSWerks Short Shifter | Power Stop Brakes | Continental DWS06 Extreme Contact Rubber |

802SHO

#7
March 07, 2019, 12:13:37 PM
Quote from: StealBlueSHO on March 07, 2019, 09:41:16 AM
Last time I had Downpipes installed, I used my go to shop, $200 installed which I was happy to fork over so I didn't have to do it.

Murphy's Motorsports, Warrenton, VA 20186
5403596581

Mike runs the front counter and Brian is the owner.


I'm actually in the shop right now getting a custom fuel line made lol.

Sent from my iPhone using Tapatalk

What are you scheming with your custom fuel line....that goes through your 🔥 wall....mid pump? 
IG @802SHO 2010 SHO non PP, Tuned by AJP Turbo, 109 Octane + VP C85 for E30, Ported GH Gen 3 upgraded turbos, Ported 13+ Exhaust Manifolds, Custom FM IC TreadStone TR10C, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks 300C LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous dual dry shots, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Phenolic Spacer, Braille Lightweight Battery, Kirky Lightweight Racing Driver Seat, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Bravado Tribute 20x9.5 + 32 offset Wheels, Nitto NT555R Front Tires, Continental Extreme Contact DW Rear Tires and all are 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, R1 Concepts Geomet slotted/drilled rotors with Heavy Duty Semi Metallic pads, Aeroforce Interceptor Gauge.
Currently World's Fastest Ecoboost SHO
11.063 @ 123.17 MPH!  NED 10/10/20

StealBlueSho

#8
March 07, 2019, 12:23:17 PM
Quote from: 802SHO on March 07, 2019, 12:13:37 PM
Quote from: StealBlueSHO on March 07, 2019, 09:41:16 AM
Last time I had Downpipes installed, I used my go to shop, $200 installed which I was happy to fork over so I didn't have to do it.

Murphy's Motorsports, Warrenton, VA 20186
5403596581

Mike runs the front counter and Brian is the owner.


I'm actually in the shop right now getting a custom fuel line made lol.

Sent from my iPhone using Tapatalk

What are you scheming with your custom fuel line....that goes through your wall....mid pump?

Negative. LMS uses the stock fuel lines for their HPFP. In order to pop an ethanol analyzer on the line I need a female to female quick disconnect line. The stock on is female to male.


Sent from my iPhone using Tapatalk

802SHO

#9
March 07, 2019, 12:29:08 PM
Quote from: StealBlueSHO on March 07, 2019, 12:23:17 PM
Quote from: 802SHO on March 07, 2019, 12:13:37 PM
Quote from: StealBlueSHO on March 07, 2019, 09:41:16 AM
Last time I had Downpipes installed, I used my go to shop, $200 installed which I was happy to fork over so I didn't have to do it.

Murphy's Motorsports, Warrenton, VA 20186
5403596581

Mike runs the front counter and Brian is the owner.


I'm actually in the shop right now getting a custom fuel line made lol.

Sent from my iPhone using Tapatalk

What are you scheming with your custom fuel line....that goes through your wall....mid pump?

Negative. LMS uses the stock fuel lines for their HPFP. In order to pop an ethanol analyzer on the line I need a female to female quick disconnect line. The stock on is female to male.


Sent from my iPhone using Tapatalk

That's sweet.  No more guessing what blend you've got! 
IG @802SHO 2010 SHO non PP, Tuned by AJP Turbo, 109 Octane + VP C85 for E30, Ported GH Gen 3 upgraded turbos, Ported 13+ Exhaust Manifolds, Custom FM IC TreadStone TR10C, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks 300C LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous dual dry shots, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Phenolic Spacer, Braille Lightweight Battery, Kirky Lightweight Racing Driver Seat, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Bravado Tribute 20x9.5 + 32 offset Wheels, Nitto NT555R Front Tires, Continental Extreme Contact DW Rear Tires and all are 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, R1 Concepts Geomet slotted/drilled rotors with Heavy Duty Semi Metallic pads, Aeroforce Interceptor Gauge.
Currently World's Fastest Ecoboost SHO
11.063 @ 123.17 MPH!  NED 10/10/20

ZSHO

#10
March 07, 2019, 01:10:22 PM Last Edit: March 07, 2019, 03:53:17 PM by ZSHO


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

SHOdded

#11
March 07, 2019, 03:44:09 PM
Hmmm, sounds like a Schrader valve there, SBS :D  Something that used to be common on fuel rails 10+ years ago.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

StealBlueSho

#12
March 07, 2019, 04:38:59 PM
Quote from: SHOdded on March 07, 2019, 03:44:09 PM
Hmmm, sounds like a Schrader valve there, SBS :D  Something that used to be common on fuel rails 10+ years ago.

Yea, it's not a schrader valve :-/ that would have been easier and cheaper!

3/8 quick disconnect.


Sent from my iPhone using Tapatalk

MKS Tom

#13
May 05, 2019, 09:47:37 PM Last Edit: May 06, 2019, 08:35:52 AM by MKS Tom
Quote from: ZSHO on March 07, 2019, 01:10:22 PM
I Would highly suggest to install new Gaskets for a leak free exhaust system. Z

Here are the part numbers needed and also optional Catalytic Converter Stud!
BTW can add the Gaskets to the list for a STICKY!!! Z

BOLT  $4.89

https://parts.levittownfordparts.com/oem-parts/ford-front-pipe-bolt-w714826s900


NUT  $1.44

https://parts.levittownfordparts.com/oem-parts/ford-front-pipe-nut-w714265s441


$3.16  STUD

https://parts.levittownfordparts.com/oem-parts/ford-catalytic-converter-stud-w712829s900



Catalytic Converter Gasket - Ford (AA5Z-6L612-A)


https://parts.levittownfordparts.com/oem-parts/ford-catalytic-converter-gasket-aa5z6l612a/?c=bT0x

Front Pipe Gasket - Ford (7T4Z-9450-AA)


https://parts.levittownfordparts.com/oem-parts/ford-front-pipe-gasket-7t4z9450aa/?c=Zz1leGhhdXN0LXN5c3RlbSZzPWV4aGF1c3QtY29tcG9uZW50cyZpPUpOMTAyOTc1JnI9OCZhPWZvcmQmbz10YXVydXMmeT0yMDEzJnQ9c2hvJmU9My01bC12Ni1nYXM%3D
Really stupid question but...

4 bolts
6 studs
10 nuts
and 2 gasket for each?

I just want to make sure I have all of the parts in the correct amounts ready to had to my mechanic to get this installed as they will be showing up soon.  Thank you. 
2013 Lincoln MKS ecoboost, 70,000 miles.  3 bar map 93 tune (E30 in the future) by both AJP Turbo and Ortiz Performance.  PPE catted down pipes, EPP dual CAI (not yet installed so K&N drop in), .026 gapped SP542, 170 degree thermostat, Dynomax axlebacks, and Power Stop Z23 pads and rotors.

ZSHO

#14
May 06, 2019, 05:28:32 PM Last Edit: May 06, 2019, 05:52:25 PM by ZSHO
@- MKS Tom- The Gaskets are mandatory and while using Double-gaskets have proven to be ideal for a leak free system and for a peace of mind.
The Bolts-Studs and Nuts are optional and for back-up purposes because sometimes rust and corrosion buildup makes the removal process that more challenging while avoiding extra Trips to the Dealer..
BTW PB Blaster is a must in order to remove the Bolts! Best of luck on the install! Z

FYI- The accessories do come in a Package Quantity of 4.
PICS and Part numbers for reference below!
4-Bolts

https://www.fordpartsgiant.com/parts/ford-bolt_-w714826-s900.html?Vin=1FAHP2KT5DG183206&Filter=()

10-M10-Nuts

https://www.fordpartsgiant.com/parts/ford-nut_-w714265-s441.html?Vin=1FAHP2KT5DG183206&Filter=()

6-Studs

https://www.fordpartsgiant.com/parts/ford-stud_-w712829-s900.html?Vin=1FAHP2KT5DG183206&Filter=()

TURBO MOUNTING STUD  FORD W712829S900  $3.47

FORD W714265S441 M-10 NUT $1.54

https://www.rockauto.com/en/parts/ford,W712829S900,stud,1000805

TURBO MOUNTING STUD  FORD W712829S900  $3.47

FORD W714265S441 M-10 NUT $1.54

https://www.rockauto.com/en/parts/ford,W712829S900,stud,1000805

https://www.rockauto.com/en/parts/ford,W714265S441,nut,1000377





FORD AA5Z6L612A  GASKET $11.04
https://www.rockauto.com/en/partsearch/?partnum=AA5Z6L612A



FORD 7T4Z9450AA  Pipe Flange Gasket / Seal  $7.31

https://www.rockauto.com/en/partsearch/?partnum=7T4Z9450AA



2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|
Print
Go Up Pages1 2
User actions