October 02, 2023, 11:32:39 AM
collapse
collapse

« previous next »
Pages: 1 [2]

Author Topic:  Splash Cover Repair  (Read 12082 times)

Offline 802SHO

  • Currently World’s Fastest Ecoboost SHO
  • RotM Winner
  • Elite Member
  • *
    • Essex Junction Vermont
  • Thank You
  • -Given: 2431
  • -Received: 1157
  • Posts: 1470
  • Boosted
  • Liked:
  • Likes Given: 7
Re: Splash Cover Repair
« Reply #15 on: January 31, 2019, 07:21:27 AM »
I just had to look between the fans and front of the engine.  I thought the splash guard covered that area but you are correct I don't have the undercover shield and I can see the ground.  Ok ok I have reached full understanding now....hope that wasnt a timed event 😬
Logged
IG @802SHO 2010 SHO non PP, Tuned by AJP Turbo, 109 Octane + VP C85 for E30, Ported GH Gen 3 upgraded turbos, Ported 13+ Exhaust Manifolds, Custom FM IC TreadStone TR10C, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks 300C LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous dual dry shots, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Phenolic Spacer, Braille Lightweight Battery, Kirky Lightweight Racing Driver Seat, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Bravado Tribute 20x9.5 + 32 offset Wheels, Nitto NT555R Front Tires, Continental Extreme Contact DW Rear Tires and all are 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, R1 Concepts Geomet slotted/drilled rotors with Heavy Duty Semi Metallic pads, Aeroforce Interceptor Gauge.
Currently World’s Fastest Ecoboost SHO
11.063 @ 123.17 MPH!  NED 10/10/20

Offline SHOdded

  • Forum Supporters
  • Elite Member
  • *
    • Beltsville, MD
  • Thank You
  • -Given: 13072
  • -Received: 4267
  • Posts: 16033
  • Liked:
  • Likes Given: 187
Re: Splash Cover Repair
« Reply #16 on: January 31, 2019, 09:46:57 AM »
When you buy these cars used, it is frequent for splash shields, engine appearance covers, even hpfp covers and tb motor covers to go missing.  Most of the time not a big deal operationally, unless you are into the triple digit speeds often.
Logged
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Offline jman

  • Full Member
  • *
    • Ontario
  • Thank You
  • -Given: 28
  • -Received: 32
  • Posts: 104
  • Ecobooster
  • Liked:
  • Likes Given: 12
Re: Splash Cover Repair
« Reply #17 on: January 31, 2019, 10:02:17 AM »
Quote from: 802SHO on January 31, 2019, 06:52:59 AM
Yes I have the splash guard that attaches that covers that area (aux cooler, Alky pump and fog lights) but the bigger cover...never had. 

If it wasn't for this post I never would have known I was supposed to have one.  Still learning about my SHO😏

Me too...
Logged

2010 - Unleashed Tune - Corsa Exhaust - 275/40-R20 - H&R Springs

Offline ZSHO

  • Forum Supporter
  • Forum Supporters
  • Elite Member
  • *
  • *
    • New York SHO
  • Thank You
  • -Given: 1945
  • -Received: 4091
  • Posts: 1982
  • Trap Speed of almost 116 mph.
  • Liked:
  • Likes Given: 0
Re: Splash Cover Repair
« Reply #18 on: January 31, 2019, 10:49:43 AM »
« Last Edit: January 31, 2019, 11:04:36 AM by ZSHO »
Logged


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline Sbouvia

  • Full Member
  • *
    • Alexandria, VA
  • Thank You
  • -Given: 41
  • -Received: 62
  • Posts: 103
  • Ecobooster
  • Liked:
  • Likes Given: 2
Re: Splash Cover Repair
« Reply #19 on: February 02, 2019, 01:38:35 PM »
Ours was brand new. I’m going to blame Ted Britt in Chantilly. The one time I had my oil changed there they didn’t put the dipstick back in all the way and I didn’t check until we drove almost 500 miles North and I was wondering why the car smelled like oil. Opened hood and oil was everywhere. I’m assuming they forgot to put bottom cover back on at this time as well. Is it worth it to order one, seeing as I’ve drive like 96k without it?
Logged
~Scott
2013 SHO non-pp. Powerstop Top Cop kit rotors and stock Akebono Ceramic Pads, 3bar map sensor, 93 octane 3bar AJPTurbo tuned, but not dialed in.
2002 Jeep Wrangler TJ (Jane) w/ 2.5" lift, Banks torque tubes, monster exhaust and intake.
1991 F Super Duty 2.5 ton dump truck w/ 7.3IDI

Offline ZSHO

  • Forum Supporter
  • Forum Supporters
  • Elite Member
  • *
  • *
    • New York SHO
  • Thank You
  • -Given: 1945
  • -Received: 4091
  • Posts: 1982
  • Trap Speed of almost 116 mph.
  • Liked:
  • Likes Given: 0
Re: Splash Cover Repair
« Reply #20 on: February 02, 2019, 02:07:54 PM »
If you plan on keeping it for long-term such as myself then why not IMO!
As mentioned earlier it also acts as a protective barrier from the oil pan plus elements,while keeping your engine bay cleaner.

I recall a while back while driving home from the dealer visit noticed the hood vibrating @ highway speeds due to the fact they forgot to install the under cover shield back on and luckily they replaced it with a new one. Z
« Last Edit: February 02, 2019, 05:29:20 PM by ZSHO »
Logged


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline Sbouvia

  • Full Member
  • *
    • Alexandria, VA
  • Thank You
  • -Given: 41
  • -Received: 62
  • Posts: 103
  • Ecobooster
  • Liked:
  • Likes Given: 2
Re: Splash Cover Repair
« Reply #21 on: February 02, 2019, 02:20:34 PM »
Is there a part number for the fasteners if they are not there? I’ll look tomorrow when it’s supposed to be 50 or so out as opposed to today where it’s only 40
Logged
~Scott
2013 SHO non-pp. Powerstop Top Cop kit rotors and stock Akebono Ceramic Pads, 3bar map sensor, 93 octane 3bar AJPTurbo tuned, but not dialed in.
2002 Jeep Wrangler TJ (Jane) w/ 2.5" lift, Banks torque tubes, monster exhaust and intake.
1991 F Super Duty 2.5 ton dump truck w/ 7.3IDI

Offline ZSHO

  • Forum Supporter
  • Forum Supporters
  • Elite Member
  • *
  • *
    • New York SHO
  • Thank You
  • -Given: 1945
  • -Received: 4091
  • Posts: 1982
  • Trap Speed of almost 116 mph.
  • Liked:
  • Likes Given: 0
Re: Splash Cover Repair
« Reply #22 on: February 02, 2019, 02:26:46 PM »
Quote from: Sbouvia on February 02, 2019, 02:20:34 PM
Is there a part number for the fasteners if they are not there? I’ll look tomorrow when it’s supposed to be 50 or so out as opposed to today where it’s only 40
I hope this helps any. Z

https://www.ecoboostperformanceforum.com/index.php/topic,6434.msg99948.html#msg99948
 
https://www.ecoboostperformanceforum.com/index.php/topic,9363.msg140714.html#msg140714

« Last Edit: February 02, 2019, 04:29:02 PM by ZSHO »
Logged


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline ZSHO

  • Forum Supporter
  • Forum Supporters
  • Elite Member
  • *
  • *
    • New York SHO
  • Thank You
  • -Given: 1945
  • -Received: 4091
  • Posts: 1982
  • Trap Speed of almost 116 mph.
  • Liked:
  • Likes Given: 0
Re: Splash Cover Repair
« Reply #23 on: February 02, 2019, 04:09:27 PM »
Here are the accessories needed for the (Under Cover Shield)
 I will set this Topic sticky!  Z

Under Cover Screw - Ford (AG1Z-00817-A) $9.74

https://www.tascaparts.com/oem-parts/ford-under-cover-screw-ag1z00817a


Under Cover Retainer Nut - Ford (-W716006-S439) $1.56

https://www.tascaparts.com/oem-parts/ford-under-cover-retainer-nut-w716006s439/?c=bT0x&recommended=1


Bracket - Engine Support - Ford (AG1Z-6096-A)  $1.06

https://www.tascaparts.com/oem-parts/ford-bracket-engine-support-ag1z6096a


« Last Edit: February 02, 2019, 05:13:59 PM by ZSHO »
Logged


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline Sbouvia

  • Full Member
  • *
    • Alexandria, VA
  • Thank You
  • -Given: 41
  • -Received: 62
  • Posts: 103
  • Ecobooster
  • Liked:
  • Likes Given: 2
Re: Splash Cover Repair
« Reply #24 on: February 02, 2019, 05:55:05 PM »
Just to be clear, unless you have some of those pieces on your car you need 4 of each for under cover screw, under cover retainer nut and bracket-engine support correct? The cover itself doesn’t come loaded with anything right?
Logged
~Scott
2013 SHO non-pp. Powerstop Top Cop kit rotors and stock Akebono Ceramic Pads, 3bar map sensor, 93 octane 3bar AJPTurbo tuned, but not dialed in.
2002 Jeep Wrangler TJ (Jane) w/ 2.5" lift, Banks torque tubes, monster exhaust and intake.
1991 F Super Duty 2.5 ton dump truck w/ 7.3IDI

Offline Sbouvia

  • Full Member
  • *
    • Alexandria, VA
  • Thank You
  • -Given: 41
  • -Received: 62
  • Posts: 103
  • Ecobooster
  • Liked:
  • Likes Given: 2
Re: Splash Cover Repair
« Reply #25 on: February 02, 2019, 06:02:22 PM »
Also kind of weird that Tasca says the screw does not fit the 2013 SHO. The parts diagram for the 2013 doesn’t show any screw.
Logged
~Scott
2013 SHO non-pp. Powerstop Top Cop kit rotors and stock Akebono Ceramic Pads, 3bar map sensor, 93 octane 3bar AJPTurbo tuned, but not dialed in.
2002 Jeep Wrangler TJ (Jane) w/ 2.5" lift, Banks torque tubes, monster exhaust and intake.
1991 F Super Duty 2.5 ton dump truck w/ 7.3IDI

Offline ZSHO

  • Forum Supporter
  • Forum Supporters
  • Elite Member
  • *
  • *
    • New York SHO
  • Thank You
  • -Given: 1945
  • -Received: 4091
  • Posts: 1982
  • Trap Speed of almost 116 mph.
  • Liked:
  • Likes Given: 0
Re: Splash Cover Repair
« Reply #26 on: February 02, 2019, 06:25:41 PM »
« Last Edit: February 02, 2019, 06:54:44 PM by ZSHO »
Logged


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline ZSHO

  • Forum Supporter
  • Forum Supporters
  • Elite Member
  • *
  • *
    • New York SHO
  • Thank You
  • -Given: 1945
  • -Received: 4091
  • Posts: 1982
  • Trap Speed of almost 116 mph.
  • Liked:
  • Likes Given: 0
Re: Splash Cover Repair
« Reply #27 on: February 03, 2019, 07:44:58 AM »
Great to see many benefiting from this thread.  Z   :)
« Last Edit: February 03, 2019, 07:53:57 AM by ZSHO »
Logged


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline Sbouvia

  • Full Member
  • *
    • Alexandria, VA
  • Thank You
  • -Given: 41
  • -Received: 62
  • Posts: 103
  • Ecobooster
  • Liked:
  • Likes Given: 2
Re: Splash Cover Repair
« Reply #28 on: February 11, 2019, 07:44:11 PM »
So just got the lower cover in from Tasca. It comes loaded with screws and bushings. Need to check on the car to see if the retainers are still on for the screws to go into. I also bought a under cover retainer (AA8Z-16K262-A) in case that’s gone. Need to return the screws and the bushings. Maybe this weekend if it’s not too bad out.
Logged
~Scott
2013 SHO non-pp. Powerstop Top Cop kit rotors and stock Akebono Ceramic Pads, 3bar map sensor, 93 octane 3bar AJPTurbo tuned, but not dialed in.
2002 Jeep Wrangler TJ (Jane) w/ 2.5" lift, Banks torque tubes, monster exhaust and intake.
1991 F Super Duty 2.5 ton dump truck w/ 7.3IDI

Offline SHOdded

  • Forum Supporters
  • Elite Member
  • *
    • Beltsville, MD
  • Thank You
  • -Given: 13072
  • -Received: 4267
  • Posts: 16033
  • Liked:
  • Likes Given: 187
Re: Splash Cover Repair
« Reply #29 on: February 12, 2019, 06:42:53 AM »
Logged
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!
Pages: 1 [2]
« previous next »
 

* Recent Topics

Re: My Staggered, TSW Wheel Setup.....
by SHOdded | September 30, 2023, 06:05:07 AM
it is a labor of love, slow brewed indeed....
Re: Body kits
by MKSJUNKIE | September 12, 2023, 10:23:45 PM
Sounds good I appreciate it. I...
Re: PTU Upgrade - Dorman
by BlueSHO | September 11, 2023, 10:46:17 AM
@timbo anything?Sent from my SM-G781V using Tapatalk...
Re: 2012 SHO PP
by bpd1151 | September 01, 2023, 08:25:20 PM
Pics are always helpful..... I mean c'mon now..... who doesn'...
Re: Fuel injector coding
by SHOdded | August 15, 2023, 01:38:53 PM
i would say to try new injectors then since fuel pump operation is goo...
Re: 315s?
by fsttyms1 | August 04, 2023, 03:40:50 PM
Thanks for the input guys. I did some reading around and even though b...
Re: bpd1151's 2010 SHO Rebuild Thread....
by kryptto | August 02, 2023, 09:12:14 PM
Just a quick update.....Went and visited the shop yesterday (07/21/202...
LH (Driver Side) Halfshaft Removal Tips?
by DaveBey | July 29, 2023, 09:54:27 PM
Does anyone have any tips for removing the LH (driver side) halfshaft?...
Re: New block, low oil pressure
by SHOdded | July 26, 2023, 01:56:20 PM
do you have an sho block or one from an explorer? their setups are sli...
Re: MSD Coils on 75% Sale
by SHOdded | July 26, 2023, 10:41:09 AM
feels like a closeout ... once gone, gone....

SimplePortal 2.3.5 © 2008-2012, SimplePortal