March 18, 2019, 10:39:19 PM
collapse
collapse

Author Topic: What is to box that the PCV valve plugs into?  (Read 537 times)

Offline SHOme

  • Full Member
  • : Maryland
  • Thank You
  • -Given: 29
  • -Received: 17
  • Posts: 95
  • Ecobooster
What is to box that the PCV valve plugs into?
« on: January 07, 2019, 08:14:07 PM »
I changed my PCV at 112k and noticed  it has the white water oil gunk in it.  My car is dripping the same looking stuff from the right front when parked.  My catch can isn't catching anything.  I have not put it on the lift to determine where the slime is coming from.  I'll post when I do.

Sent from my Pixel 2 XL using Tapatalk

2014 SHO, PP 3 bar, 160 T Stat, Livernois v10 Tune, UPR catch can. MDesign CAI

Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • : New York SHO
  • Thank You
  • -Given: 1306
  • -Received: 2989
  • Posts: 2072
  • Trap Speed of almost 116 mph.
Re: What is to box that the PCV valve plugs into?
« Reply #1 on: January 08, 2019, 04:23:18 AM »
That's your Oil Separator which acts as a catch can and has a built in internal relief valve which plays an important role and needs to be changed Pronto!
 I would also check around the rear valve cover for leaks. .
 
Need to check your OCC check valve and could be plugged.
Check your oil level ASAP!
Check CAC (Intercooler) with a oil dipstick for oil pooling.  Z

https://www.ecoboostperformanceforum.com/index.php/topic,8777.0.html


 
   
« Last Edit: January 08, 2019, 06:59:22 AM by ZSHO »


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|Airaid-Dry-flow-CAI|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline SHOme

  • Full Member
  • : Maryland
  • Thank You
  • -Given: 29
  • -Received: 17
  • Posts: 95
  • Ecobooster
Re: What is to box that the PCV valve plugs into?
« Reply #2 on: January 09, 2019, 12:42:08 PM »
Crisis averted.  I changed the oil separator.  It wasn't to bad but the check valve inside was sticky.  The leak was coming from my catch can.  I must have left the drain valve cracked open.  This would explain it being empty.  It didn't noticably effect the performance.  I have some piece of mind knowing everything is new.  Thanks for the info.  Now I need to figure out how to drain the swamp CC easier.  It's a PITA to get to the bottom of the can to drain it.

Sent from my Pixel 2 XL using Tapatalk

2014 SHO, PP 3 bar, 160 T Stat, Livernois v10 Tune, UPR catch can. MDesign CAI

Offline BlueSHO

  • Elite Member
  • : Crete, ILliNoIS
  • Thank You
  • -Given: 102
  • -Received: 93
  • Posts: 524
  • Ecobooster
Re: What is to box that the PCV valve plugs into?
« Reply #3 on: January 09, 2019, 11:39:40 PM »
Crisis averted.  I changed the oil separator.  It wasn't to bad but the check valve inside was sticky.  The leak was coming from my catch can.  I must have left the drain valve cracked open.  This would explain it being empty.  It didn't noticably effect the performance.  I have some piece of mind knowing everything is new.  Thanks for the info.  Now I need to figure out how to drain the swamp CC easier.  It's a PITA to get to the bottom of the can to drain it.

Sent from my Pixel 2 XL using Tapatalk
Was that the correct part number on your old piece you replaced?

Sent from my SM-G950U using Tapatalk

2016 SHO Blue Jeans
2001 Lightning
1996 Mystic Cobra

Offline SHOme

  • Full Member
  • : Maryland
  • Thank You
  • -Given: 29
  • -Received: 17
  • Posts: 95
  • Ecobooster
Re: What is to box that the PCV valve plugs into?
« Reply #4 on: January 10, 2019, 07:16:25 AM »
Crisis averted.  I changed the oil separator.  It wasn't to bad but the check valve inside was sticky.  The leak was coming from my catch can.  I must have left the drain valve cracked open.  This would explain it being empty.  It didn't noticably effect the performance.  I have some piece of mind knowing everything is new.  Thanks for the info.  Now I need to figure out how to drain the swamp CC easier.  It's a PITA to get to the bottom of the can to drain it.

Sent from my Pixel 2 XL using Tapatalk
Was that the correct part number on your old piece you replaced?

Sent from my SM-G950U using Tapatalk
That is what I gave the guy at the parts counter.  Wether he cross referenced it I don't know.  The box is in my shop. I will check it when I get out there.

Sent from my Pixel 2 XL using Tapatalk

2014 SHO, PP 3 bar, 160 T Stat, Livernois v10 Tune, UPR catch can. MDesign CAI

Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • : New York SHO
  • Thank You
  • -Given: 1306
  • -Received: 2989
  • Posts: 2072
  • Trap Speed of almost 116 mph.
Re: What is to box that the PCV valve plugs into?
« Reply #5 on: January 10, 2019, 09:24:29 AM »
FYI- The Oil Sep should be the same part number AFAIK! I had the TSB performed under warranty back on 12/14! Work order for reference below!  Z

Ford Part No - AA5Z-6A785-F The vehicle options this part fits Production Date: 12/2009-   $60.95

https://fordpartsgiant.com/parts/ford-separator-asy-oil_aa5z-6a785-f.html?Vin=1FAHP2KT5DG183206&Filter=()&Location=emission-control-crankcase,,6A785








« Last Edit: January 10, 2019, 09:30:36 AM by ZSHO »


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|Airaid-Dry-flow-CAI|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

 

* Featured Topics

* Recent Topics

What have you done to your Ecoboosted vehicle today?
by StealBlueSho | Today at 05:34:40 PM
So been busy making sure everything is GTG for the turbo/DP installati...
Re: Radar rear view mirror Tap!
by FoMoCoSHO | Today at 05:19:10 PM
FWIW AUCEE Dash Cam Hardwire kit, Mini USB Port,DC 12V - 36V to 5V/2A ...
Re: SHO possibly Total loss
by ZSHO | Today at 04:59:46 PM
https://www.carid.com/2013-ford-taurus-grill/?filter=1&sub-model%5...
Re: Gearhead E30 vs Livernois E30 MIR 03/17/2019
by Macgyver | Today at 04:37:33 PM
Nitto NT555R 275/40/20 up front only I bet will work wonders.  I ...
Re: Connect issue see dealer on the radio, which fuse?
by SHOdded | Today at 02:58:52 PM
try fuse 14 (10 amp) in the passenger compartment fuse panel....
Re: 2013 XSport - DTC P0016 - Camshaft Position Correlation, Bank 1
by SHOdded | Today at 02:54:49 PM
It won't really save time with the intercooler install, unless th...
Re: 15 SHO F/R Brake Torque Specs
by nickstewartroc | Today at 07:21:56 AM
Nick that would be insane...DaveHere ya go!http://www.nicksmustangranc...
Info needed Catch can system
by mcrmb1 | Today at 04:09:35 AM
Has anyone tried one of the TEAM RXP 2019 HEAT EXCHANGED FULL BILLET S...
Re: BENDIX & WAGNER Rotors!
by SHOdded | Today at 04:00:27 AM
If you want to go EBCs, skip red, go straight to Yellow (or Orange if ...
Re: Hawk Street 5.0 Brake Pads!
by r1crusher | March 17, 2019, 07:49:23 PM
Just an FYI....the OE part numbers look to have been superseded (for t...
Re: Stability Control.....
by nickstewartroc | March 17, 2019, 07:36:20 PM
Got the pin run today to the IPC, and messed with the programming a li...
Re: O2 sensor
by FoMoCoSHO | March 17, 2019, 03:06:10 PM
Whats with all the Bosch hate?There is a ton of Bosch items in our car...
Re: 3.5eco transverse prone to water pump failures?
by FoMoCoSHO | March 17, 2019, 01:50:09 PM
There's at least 1 class action lawsuit regarding the transverse ...
Re: New Intercooler for Transverse 3.5L Ecoboost
by FoMoCoSHO | March 17, 2019, 01:16:39 PM
Has anyone stuffed one of these in an MKS yet?...
Re: Going Back to the 1/4!
by SHOdded | March 17, 2019, 12:42:09 PM
Well done, sir, well done!...

Back to top