March 25, 2019, 04:43:13 AM
collapse
collapse

Author Topic: What is to box that the PCV valve plugs into?  (Read 555 times)

Offline SHOme

  • Full Member
  • : Maryland
  • Thank You
  • -Given: 29
  • -Received: 19
  • Posts: 96
  • Ecobooster
What is to box that the PCV valve plugs into?
« on: January 07, 2019, 08:14:07 PM »
I changed my PCV at 112k and noticed  it has the white water oil gunk in it.  My car is dripping the same looking stuff from the right front when parked.  My catch can isn't catching anything.  I have not put it on the lift to determine where the slime is coming from.  I'll post when I do.

Sent from my Pixel 2 XL using Tapatalk

2014 SHO, PP 3 bar, 160 T Stat, Livernois v10 Tune, UPR catch can. MDesign CAI

Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • : New York SHO
  • Thank You
  • -Given: 1318
  • -Received: 3017
  • Posts: 2092
  • Trap Speed of almost 116 mph.
Re: What is to box that the PCV valve plugs into?
« Reply #1 on: January 08, 2019, 04:23:18 AM »
That's your Oil Separator which acts as a catch can and has a built in internal relief valve which plays an important role and needs to be changed Pronto!
 I would also check around the rear valve cover for leaks. .
 
Need to check your OCC check valve and could be plugged.
Check your oil level ASAP!
Check CAC (Intercooler) with a oil dipstick for oil pooling.  Z

https://www.ecoboostperformanceforum.com/index.php/topic,8777.0.html


 
   
« Last Edit: January 08, 2019, 06:59:22 AM by ZSHO »


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|Airaid-Dry-flow-CAI|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline SHOme

  • Full Member
  • : Maryland
  • Thank You
  • -Given: 29
  • -Received: 19
  • Posts: 96
  • Ecobooster
Re: What is to box that the PCV valve plugs into?
« Reply #2 on: January 09, 2019, 12:42:08 PM »
Crisis averted.  I changed the oil separator.  It wasn't to bad but the check valve inside was sticky.  The leak was coming from my catch can.  I must have left the drain valve cracked open.  This would explain it being empty.  It didn't noticably effect the performance.  I have some piece of mind knowing everything is new.  Thanks for the info.  Now I need to figure out how to drain the swamp CC easier.  It's a PITA to get to the bottom of the can to drain it.

Sent from my Pixel 2 XL using Tapatalk

2014 SHO, PP 3 bar, 160 T Stat, Livernois v10 Tune, UPR catch can. MDesign CAI

Offline BlueSHO

  • Elite Member
  • : Crete, ILliNoIS
  • Thank You
  • -Given: 102
  • -Received: 94
  • Posts: 525
  • Ecobooster
Re: What is to box that the PCV valve plugs into?
« Reply #3 on: January 09, 2019, 11:39:40 PM »
Crisis averted.  I changed the oil separator.  It wasn't to bad but the check valve inside was sticky.  The leak was coming from my catch can.  I must have left the drain valve cracked open.  This would explain it being empty.  It didn't noticably effect the performance.  I have some piece of mind knowing everything is new.  Thanks for the info.  Now I need to figure out how to drain the swamp CC easier.  It's a PITA to get to the bottom of the can to drain it.

Sent from my Pixel 2 XL using Tapatalk
Was that the correct part number on your old piece you replaced?

Sent from my SM-G950U using Tapatalk

2016 SHO Blue Jeans
2001 Lightning
1996 Mystic Cobra

Offline SHOme

  • Full Member
  • : Maryland
  • Thank You
  • -Given: 29
  • -Received: 19
  • Posts: 96
  • Ecobooster
Re: What is to box that the PCV valve plugs into?
« Reply #4 on: January 10, 2019, 07:16:25 AM »
Crisis averted.  I changed the oil separator.  It wasn't to bad but the check valve inside was sticky.  The leak was coming from my catch can.  I must have left the drain valve cracked open.  This would explain it being empty.  It didn't noticably effect the performance.  I have some piece of mind knowing everything is new.  Thanks for the info.  Now I need to figure out how to drain the swamp CC easier.  It's a PITA to get to the bottom of the can to drain it.

Sent from my Pixel 2 XL using Tapatalk
Was that the correct part number on your old piece you replaced?

Sent from my SM-G950U using Tapatalk
That is what I gave the guy at the parts counter.  Wether he cross referenced it I don't know.  The box is in my shop. I will check it when I get out there.

Sent from my Pixel 2 XL using Tapatalk

2014 SHO, PP 3 bar, 160 T Stat, Livernois v10 Tune, UPR catch can. MDesign CAI

Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • : New York SHO
  • Thank You
  • -Given: 1318
  • -Received: 3017
  • Posts: 2092
  • Trap Speed of almost 116 mph.
Re: What is to box that the PCV valve plugs into?
« Reply #5 on: January 10, 2019, 09:24:29 AM »
FYI- The Oil Sep should be the same part number AFAIK! I had the TSB performed under warranty back on 12/14! Work order for reference below!  Z

Ford Part No - AA5Z-6A785-F The vehicle options this part fits Production Date: 12/2009-   $60.95

https://fordpartsgiant.com/parts/ford-separator-asy-oil_aa5z-6a785-f.html?Vin=1FAHP2KT5DG183206&Filter=()&Location=emission-control-crankcase,,6A785








« Last Edit: January 10, 2019, 09:30:36 AM by ZSHO »


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|Airaid-Dry-flow-CAI|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

 

* Featured Topics

* Recent Topics

Re: Catch can,air/oil seperator, vent to atmosphere?
by ZSHO | Today at 04:00:28 AM
Here are a couple PICS of the CFM PERFORMANCE BILLET VALVE COVER BREAT...
Re: First new year outing guesses 3/24
by 802SHO | Today at 02:47:22 AM
Here is an unedited video of the fastest run of the day.https://www.yo...
Re: Dead 100% battery symptoms??
by 802SHO | Today at 02:42:22 AM
Ok...Money no object!!!!!  HHEHEHE.  Has anyone else seen th...
Re: Transmission drain and fill
by BlueSHO | March 24, 2019, 08:15:58 PM
I think he was asking about a drain and fill which I believe is about ...
Re: What have you done to your Ecoboosted vehicle today?
by Jordan | March 24, 2019, 06:15:08 PM
What was the Total in weight reduction ? Znot sure, but let's say...
Re: Help me Diagnose Knocking Sound
by abs | March 24, 2019, 05:46:28 PM
Thanks all for the replies.  I've been running 5w-30 full sy...
Re: 15 SHO F/R Brake Torque Specs
by SHODOWN | March 24, 2019, 12:17:38 PM
Nick thank you so much this is awesome...great addition to the GT info...
Re: Gearhead E30 vs Livernois E30 MIR 03/17/2019
by sm105k | March 23, 2019, 10:49:00 PM
Last I heard, as of a few days ago, all IC's on hand have been so...
Re: Tune for 2019 Flex
by Zxtman | March 23, 2019, 06:18:32 PM
Thanks for the feedback guys.  I now see I have a couple of optio...
Re: BENDIX & WAGNER Rotors!
by ZSHO | March 23, 2019, 01:44:12 PM
Brake Pad “Break in procedure for “Severe Duty” vehicles” Bulletin BPI...
Re: OEM Brake Endurance
by FoMoCoSHO | March 23, 2019, 11:35:01 AM
No worries......2010 to 2012 GEN42013 to current GEN5 The EBC's w...
Re: New member from Massachusetts
by 18SHO | March 23, 2019, 07:26:31 AM
  Hello everyone!!. I've been a long time owner of the SHO ...
Re: Articles on Engine Design
by SHOdded | March 23, 2019, 05:38:05 AM
Vehicle Miles Traveled vs VOC Emissions TLThttps://www.ecoboostperform...
Re: Struts going bad...Suggestions?
by Sabtaj1 | March 23, 2019, 02:10:42 AM
Are you sure its the struts?  Say if you are driving over 40mph a...
Re: Going Back to the 1/4!
by ajpturbo | March 22, 2019, 04:33:08 PM
Nice Job! 81 degrees in FLorida and almost 110mph on a 93 tune is not ...

Back to top