• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Trims match after reinstalling stock catback

Started by polskifacet, December 30, 2018, 04:26:48 PM

Previous topic - Next topic

polskifacet

Hey Guys,
Put the stock catback back on recently keeping the catted PPE downpipes on and I noticed that my LTFT are now identical. Previously there was about 10 - 13% difference between banks. Interesting.
AEM Dryflo drop in. PP Transmission Cooler and thermostat. 160 tstat, 3 bar map, plugs, AJP 93 Tune, PP Shocks and Springs

StealBlueSho

Quote from: polskifacet on December 30, 2018, 04:26:48 PM
Hey Guys,
Put the stock catback back on recently keeping the catted PPE downpipes on and I noticed that my LTFT are now identical. Previously there was about 10 - 13% difference between banks. Interesting.

That makes no sense... lol... were your AFRs similar on both banks?


Sent from my iPhone using Tapatalk

polskifacet

I'm not sure as i didn't log this specific thing. I think wot they were ok but anything closed loop they were wacky since I have been looking at metrics. My trims have never been this close (.5% or less) with the aftermarket Catback.
AEM Dryflo drop in. PP Transmission Cooler and thermostat. 160 tstat, 3 bar map, plugs, AJP 93 Tune, PP Shocks and Springs