• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Dyno

Started by Bklynite, November 19, 2018, 09:16:15 AM

Previous topic - Next topic

Bklynite

So I would love to get my car on a Dyno but the 2 shops near me are not for AWD, so my question is can it be done with just 2 wheels by removing the drive shaft, the tech at one spot mentioned that he has done it with some Nissan GTR's and hasn't had a problem, he's had numerous 2.7 and 3.5 mustangs on his Dyno but has never worked with a SHO
what do you all think? if so would it be done with front or rear axel on rollers.
And thanks for your inputs.
2011 SHO - Catless 2.5 Downpipes, GH Intercooler, K&N air filter, JLT Cath Can, H&R Coil Springs

ToMang07

Better off finding an AWD dyno.
~Tom~
2013 SHO - Stage 3 Snow Performance Meth, (2) SCT X4 with Unleashed, 3 Bar Map, MSD Ignition Coils w/Colder Plugs 170*TS, EcoPowerParts Hot Pipes & Tial-Q BOV) Stage 3 Motorsports Catless Downpipes 3" Cat-Back Exhaust, JLT Oil Separator, H&R Sport Springs, K&N CAI, Drilled and Slotted Rotors w/EBC Pads

nickstewartroc

Should be able to pull out the ABS fuse and it should put it in 2wd drive mode
Current:
2013 Ruby Red Flex Limited EcoBoost, Unleashed Tuned, drop in filter

Gone but not forgotten: 2011 SHO Non-PP in Black Tuxedo Metallic - Catback, DPs, Stoptech Z23s, MDesign CAI, LMS Tune

LostnEye

Quote from: Bklynite on November 19, 2018, 09:16:15 AM
So I would love to get my car on a Dyno but the 2 shops near me are not for AWD, so my question is can it be done with just 2 wheels by removing the drive shaft, the tech at one spot mentioned that he has done it with some Nissan GTR's and hasn't had a problem, he's had numerous 2.7 and 3.5 mustangs on his Dyno but has never worked with a SHO
what do you all think? if so would it be done with front or rear axel on rollers.
And thanks for your inputs.
Ford doesn't make 2.7 or 3.5 Mustangs. The only EB stangs are the 2.3 four cyl.
2013 Tuxedo Black/Mayan Grey PP, GH AO, GH IC, H&Rs, AD mounts

SM105K

"M" 2013 SHO PP | AJPTurbo E30 Tune | FS HPFP | Stock IC with Ice Water DIY Sprayer | PPE Downpipes | Custom Magnaflow Resonator | 3rd Cat Delete | Derale Upgraded Trans Cooler | Dicunzolo Gen2 Trans Mounts| EPP Noisemaker Eliminator | MSD Coil Over Plugs | SP-542's | UPR Dual Valve Catch Can | K&N Drop In | Power Stop Slotted and Drilled Rotors with Stock PP Pads | H&R Springs  | AVS Flush Deflector | 802SHO Custom Splitter | Duraflex Chin Spoiler | Curva Concept C7's | Continental DWS06 Extreme Contact Rubber | 411 HP and 546 TQ |

"The Fukus" 2013 Focus ST | Boomba BOV | FSWerks Short Shifter | Power Stop Brakes | Continental DWS06 Extreme Contact Rubber |

FearlessAZ

Just google an AWD dyno in your area. There is usually at least a few in every big city.


According to your bio, it says Miami? There has to be more than a few there.
2010 Non PP Sho. All the factory goodies. (RIP)


2015 MKS Ecoboost. All the factory goodies. (SOLD)