• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

2014 PI Wheel Hub Question

Started by klrsmith, April 29, 2018, 07:32:00 AM

Previous topic - Next topic
Print
Go Down Pages1 2
User actions

klrsmith

April 29, 2018, 07:32:00 AM
Good Morning. 

I'm going to replace the wheel hubs on my 2014 Ecoboost PI - I can move three of four of them at both the 9&3 and 12&6 o'clock positions when I jack up the car and have an annoying whooshing sound when I drive.  I've got just over 100k on it now.

Can anyone tell me what size socket I need for the Axle Nut?  From what I could find online, this could be one of several sizes, but I believe it to be a 32mm - is that correct and is it the same for both front and rear?

2014 Ecoboost PI - AJPturbo 3 Bar/93 tune - AEM dry panel - Reische 170 thermo - SP542 plugs - EPP Hotpipes - Power Stop Z37 Top Cop pads and slotted rotors

ZSHO

#1
April 29, 2018, 07:42:04 AM Last Edit: April 29, 2018, 07:45:16 AM by ZSHO


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

klrsmith

#2
April 29, 2018, 08:12:44 AM
Awesome, thanks Z!

Do you think  it makes sense to pickup a couple of those thrust washers and take care of that TSB while I'm in there - though I don't have that ting/clicking issue.
2014 Ecoboost PI - AJPturbo 3 Bar/93 tune - AEM dry panel - Reische 170 thermo - SP542 plugs - EPP Hotpipes - Power Stop Z37 Top Cop pads and slotted rotors

ZSHO

#3
April 29, 2018, 09:31:05 AM Last Edit: April 29, 2018, 09:33:40 AM by ZSHO
Absolutely! Kill Two birds with one stone.  Z   :)





2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

lamrith

#4
April 29, 2018, 10:55:36 AM
Those washers are needed/used for front only I believe?  I am gonna pickup a set for when I do H&R's next weekend.
'13 Sho PP, SCT x4, AJP 92-Octane rev6 (14psi&20spark) NGK 6510, 3Bar, K&N CAI, PPE Catted DP, Dynomax Axleback, 20*9.5 Voxx Lago w/ 275/40-20 GMAX AS-05.

SHOdded

#5
April 29, 2018, 01:39:38 PM
Quote from: ZSHO on April 29, 2018, 09:31:05 AM
Absolutely! Kill Two birds with one stone.  Z   :)
And now you know why we love pics.  They do indeed prove their worth, every time.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

ZSHO

#6
April 29, 2018, 04:26:10 PM
Quote from: SHOdded on April 29, 2018, 01:39:38 PM
Quote from: ZSHO on April 29, 2018, 09:31:05 AM
Absolutely! Kill Two birds with one stone.  Z   :)
And now you know why we love pics.  They do indeed prove their worth, every time.
True Indeed kind sir.  Z


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

klrsmith

#7
April 29, 2018, 04:47:56 PM
Guys,

Thanks a lot for the additional info, especially the pics!!  Will let you know how it turns out.
2014 Ecoboost PI - AJPturbo 3 Bar/93 tune - AEM dry panel - Reische 170 thermo - SP542 plugs - EPP Hotpipes - Power Stop Z37 Top Cop pads and slotted rotors

ZSHO

#8
April 29, 2018, 05:01:39 PM
NP klrsmith..Best of luck to ya.  Z

! No longer available


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

lamrith

#9
April 30, 2018, 12:22:24 PM
FYI - The part number Z gave is very hard to find right now.  None of the online sights have them and my local dealer said none of the warhouses had them in stock. 

He was however able to do some digging and said there is a new replacement number for them.
F2GZ-7G273-A

I just ordered a pair of the new number and will advise when they arrive in a few days.  It they look the same and install well I will put a post in the TSB thread.
'13 Sho PP, SCT x4, AJP 92-Octane rev6 (14psi&20spark) NGK 6510, 3Bar, K&N CAI, PPE Catted DP, Dynomax Axleback, 20*9.5 Voxx Lago w/ 275/40-20 GMAX AS-05.

glock-coma

#10
April 30, 2018, 12:36:24 PM
I used BB5Z-7G273-B
on my 2010 when I installed H&R springs. Worked beautifully, mine were all metal though no plastic.
2010 red candy metallic non PP 402B
AJPTURBO 2 BAR Tune Stock 14.1@100.3 / Tuned 12.83@107.7
K&N panel, RX OCC, Sp-534 @.30 Tint 50%F-35%R BOV bypass
1997 SHO silver frost (sold)
1990 SHO triple black 5-speed (saved my life)

glock-coma

#11
April 30, 2018, 12:37:21 PM
Wheel hub torque should be the same as 2010 too, 258 ft lbs.

Someone please correct if I'm wrong.
2010 red candy metallic non PP 402B
AJPTURBO 2 BAR Tune Stock 14.1@100.3 / Tuned 12.83@107.7
K&N panel, RX OCC, Sp-534 @.30 Tint 50%F-35%R BOV bypass
1997 SHO silver frost (sold)
1990 SHO triple black 5-speed (saved my life)

ZSHO

#12
April 30, 2018, 12:47:47 PM Last Edit: April 30, 2018, 12:59:20 PM by ZSHO
It seems like a washer Frenzy in the works. Lol.  :D

It appears that the previous part number has been Discontinued and replaced by Part number - 7G273.  Z


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

ZSHO

#13
April 30, 2018, 12:56:59 PM
Quote from: glock-coma on April 30, 2018, 12:37:21 PM
Wheel hub torque should be the same as 2010 too, 258 ft lbs.

Someone please correct if I'm wrong.
That sounds about right Glock. IIRC.  Z


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

lamrith

#14
May 01, 2018, 09:14:24 PM
Picked up the new washers today.  These are all steel, no plastic/Teflon or anything.  Just stamped steel.

Install planned for the weekend.

Sent from my SAMSUNG-SM-G935A using Tapatalk

'13 Sho PP, SCT x4, AJP 92-Octane rev6 (14psi&20spark) NGK 6510, 3Bar, K&N CAI, PPE Catted DP, Dynomax Axleback, 20*9.5 Voxx Lago w/ 275/40-20 GMAX AS-05.
Print
Go Up Pages1 2
User actions