June 16, 2019, 03:37:04 AM
collapse
collapse

Author Topic: New Intercooler for Transverse 3.5L Ecoboost  (Read 28367 times)

Offline 802SHO

  • Elite Member
  • : Essex Junction Vermont
  • Thank You
  • -Given: 1001
  • -Received: 424
  • Posts: 688
  • Boosted
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #180 on: January 10, 2019, 06:06:55 AM »
I would buy one just as a keepsake, but that shipping weight is scaring the bejeezuz out of me LOL.

Jeez 40 pounds!  What does the stock one weigh? 
2010 SHO non PP, GH upgraded turbos, GH upgraded IC, Alky Control Methonal Injection, Gen2 torque mounts, SP542 .028, 160 T, Airaid Intake, 3bar, Thunderstorm Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", Aeroforce Interceptor Gauge, Tuned by AJP Turbo

463awhp 569 awtq mustang dyno 6/13/19

11.833 @ 116.82 New England Dragway 10/14/18 AJP Turbo No DA Correction

Offline Jordan

  • Sr. Member
  • : Columbia, Mo
  • Thank You
  • -Given: 98
  • -Received: 314
  • Posts: 409
  • Land Yacht Owner
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #181 on: January 10, 2019, 07:35:20 AM »
I would buy one just as a keepsake, but that shipping weight is scaring the bejeezuz out of me LOL.

Jeez 40 pounds!  What does the stock one weigh? 

Maybe 15lbs, but I am assuming the total shipping weight is about 40lbs. Considering the end tanks are now cast aluminum instead of plastic as well as the weight of the box and foam etc i don't doubt it honestly. Should be a good upgrade. I'll have mine coming ASAP so I can get started on the installation. Now I gotta scrounge up some bucks! I got a little ambitious and tried to pay down some debt, but I sure did that at the wrong time LOL
8/26/18 11.984 @ 113.01mph E30 Stock HPFP 4350DA
3/24/19 11.991 @ 114.72mph 93 Oct. Stock HPFP 1000DA
3/24/19 11.767 @ 117.81mph C20 Race Fuel Stock HPFP 1300DA
Highest Trap Speed of 118.71mph
AJPTURBO TUNED 5/4/19 - XDI35 HPFP, Gearhead Intercooler, J2 Dual Intake, OBX catless downpipes, 3 bar, 170 thermo, MSD coil, full exhaust, upgraded trans mounts, and Ebay compressor wheels

Offline Colorado-SHOBro

  • Elite Member
  • : Denver, CO
  • Thank You
  • -Given: 64
  • -Received: 311
  • Posts: 651
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #182 on: January 10, 2019, 08:47:06 AM »
^Just saw this info as well! Id really like to know if Brad thinks he can tune for it.
Paging AJPturbo!


Sent from my iPhone using Tapatalk

Absolutely! I exchanged some brief words with Gearhead about the intercooler and I highly recommend getting one if you have the means. I think this is one of the best things to come out for the SHO recently. Can't wait to see them out there.
Great to hear Brad! I'll definitely be doing the upgrade but it may be after tax returns. I've already replaced my intercooler once so installation should be a bit easier the 2nd time around. 
11' SHO Tuxedo Metallic black-non PP | Highly sophisticated high altitude custom AJP Turbo E30 3Bar tune w/Wastegate mod | Cat'd ceramic PPE downpipes |170 stat| SP542 plugs .028 | PP trans cooler | H&R springs | RX catch can

12.8@108 @ 6,000ft DA.

Online SHOdded

  • Administrator
  • Elite Member
  • : Beltsville, MD
  • Thank You
  • -Given: 11015
  • -Received: 3650
  • Posts: 15093
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #183 on: January 10, 2019, 08:59:51 AM »
def don't mean to shed any doubt on this upgrade.  this thing means business.  everyone on here should already have ordered it :D
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Offline 802SHO

  • Elite Member
  • : Essex Junction Vermont
  • Thank You
  • -Given: 1001
  • -Received: 424
  • Posts: 688
  • Boosted
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #184 on: January 10, 2019, 09:01:54 AM »
I would buy one just as a keepsake, but that shipping weight is scaring the bejeezuz out of me LOL.

Jeez 40 pounds!  What does the stock one weigh? 

Maybe 15lbs, but I am assuming the total shipping weight is about 40lbs. Considering the end tanks are now cast aluminum instead of plastic as well as the weight of the box and foam etc i don't doubt it honestly. Should be a good upgrade. I'll have mine coming ASAP so I can get started on the installation. Now I gotta scrounge up some bucks! I got a little ambitious and tried to pay down some debt, but I sure did that at the wrong time LOL

Man I'm excited to see the install video and hear your results!  I'm definitely down for the upgrade as well and I'm in a similar situation with funding Lol!  Except mine is buying a root canal and a crown!  Yippie 😕😳
2010 SHO non PP, GH upgraded turbos, GH upgraded IC, Alky Control Methonal Injection, Gen2 torque mounts, SP542 .028, 160 T, Airaid Intake, 3bar, Thunderstorm Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", Aeroforce Interceptor Gauge, Tuned by AJP Turbo

463awhp 569 awtq mustang dyno 6/13/19

11.833 @ 116.82 New England Dragway 10/14/18 AJP Turbo No DA Correction

Offline StealBlueSHO

  • Elite Member
  • Thank You
  • -Given: 2225
  • -Received: 2189
  • Posts: 3502
  • I poke at BPD1151
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #185 on: January 10, 2019, 09:15:45 AM »
Email sent! Hoping I can get it next week sometime!!!


Sent from my iPhone using Tapatalk
2016 Taurus SHO PP, Gearhead Tuned, Gearhead Upgraded Gen3 Turbos, XDI-35 HPFP, Gearhead Intercooler, EPP Catted/Thermal coated DP's, Corsa Exhaust, HR Springs, Airaid Intake, EPP Hotpipes, Gearhead 170F Tstat, 3BAR Map, UPR CSS Catch Can, MSD Blaster Coils, Upgraded Torque Mounts, Fuel-IT BT Ethanol Analyzer, SP-542's.

484awhp/496awtq

Best of 12.192 @ 113.80 Gearhead E30 Tune - Pre-Turbo/DP/Torque Mount Upgrades.

Offline 10bird

  • Jr. Member
  • Thank You
  • -Given: 4
  • -Received: 2
  • Posts: 35
  • Ecobooster
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #186 on: January 10, 2019, 09:23:03 AM »
def don't mean to shed any doubt on this upgrade.  this thing means business.  everyone on here should already have ordered it :D
How difficult are these to install?

Offline Jordan

  • Sr. Member
  • : Columbia, Mo
  • Thank You
  • -Given: 98
  • -Received: 314
  • Posts: 409
  • Land Yacht Owner
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #187 on: January 10, 2019, 01:26:54 PM »
Can be installed probably in a few hours solo with regular hand tools.
8/26/18 11.984 @ 113.01mph E30 Stock HPFP 4350DA
3/24/19 11.991 @ 114.72mph 93 Oct. Stock HPFP 1000DA
3/24/19 11.767 @ 117.81mph C20 Race Fuel Stock HPFP 1300DA
Highest Trap Speed of 118.71mph
AJPTURBO TUNED 5/4/19 - XDI35 HPFP, Gearhead Intercooler, J2 Dual Intake, OBX catless downpipes, 3 bar, 170 thermo, MSD coil, full exhaust, upgraded trans mounts, and Ebay compressor wheels

Offline mattr66

  • Jr. Member
  • Thank You
  • -Given: 0
  • -Received: 99
  • Posts: 38
  • Ecobooster
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #188 on: January 10, 2019, 01:51:22 PM »
I would buy one just as a keepsake, but that shipping weight is scaring the bejeezuz out of me LOL.

Jeez 40 pounds!  What does the stock one weigh? 

Maybe 15lbs, but I am assuming the total shipping weight is about 40lbs. Considering the end tanks are now cast aluminum instead of plastic as well as the weight of the box and foam etc i don't doubt it honestly. Should be a good upgrade. I'll have mine coming ASAP so I can get started on the installation. Now I gotta scrounge up some bucks! I got a little ambitious and tried to pay down some debt, but I sure did that at the wrong time LOL
Core is a beast... Only thing that would work in this application was sourced from a European diesel application.... So you are picking up some extra weight, but you are also at almost 3x the fin surface area of stock...

Sent from my Moto Z (2) using Tapatalk


Offline 802SHO

  • Elite Member
  • : Essex Junction Vermont
  • Thank You
  • -Given: 1001
  • -Received: 424
  • Posts: 688
  • Boosted
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #189 on: January 10, 2019, 03:44:25 PM »
I would buy one just as a keepsake, but that shipping weight is scaring the bejeezuz out of me LOL.

Jeez 40 pounds!  What does the stock one weigh? 

Maybe 15lbs, but I am assuming the total shipping weight is about 40lbs. Considering the end tanks are now cast aluminum instead of plastic as well as the weight of the box and foam etc i don't doubt it honestly. Should be a good upgrade. I'll have mine coming ASAP so I can get started on the installation. Now I gotta scrounge up some bucks! I got a little ambitious and tried to pay down some debt, but I sure did that at the wrong time LOL
Core is a beast... Only thing that would work in this application was sourced from a European diesel application.... So you are picking up some extra weight, but you are also at almost 3x the fin surface area of stock...

Sent from my Moto Z (2) using Tapatalk

It is intersting that it weighs more but it was more of a joke about adding too much weight going back to the weight reduction humor but well worth the extra weight for sure!
2010 SHO non PP, GH upgraded turbos, GH upgraded IC, Alky Control Methonal Injection, Gen2 torque mounts, SP542 .028, 160 T, Airaid Intake, 3bar, Thunderstorm Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", Aeroforce Interceptor Gauge, Tuned by AJP Turbo

463awhp 569 awtq mustang dyno 6/13/19

11.833 @ 116.82 New England Dragway 10/14/18 AJP Turbo No DA Correction

Offline BoostfoSHO

  • Sr. Member
  • Thank You
  • -Given: 62
  • -Received: 117
  • Posts: 290
  • Ecobooster
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #190 on: January 12, 2019, 09:55:57 AM »
Just got an update from Matt and asked me to post in the forums in regards to the intercoolers.

 no one has been contacted yet.  We have to do some qc on the shippment before they can ship out.  Nobody has been emailed yet.

Sent from my SM-N960U using Tapatalk

AJPTurbo FTW
2015 SHO PP
Air raid intake, 3bar, OBX catless downpipes, 160tstat 2. Electric exhaust cutouts, MSD ignition coil, hot pipes with Tial BOV, AJP Turbo wastegate regulator mod.
 For now...
Pending install. Snow stage

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2069
  • -Received: 1978
  • Posts: 3405
  • SHOGAZM
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #191 on: January 17, 2019, 09:23:32 AM »
Oh my...... I was woken to the dogs barking, the door bell ringing just now.

Upon heading to the front door, low and behold, Santa arrived with a late package for me.

A brand spanking new and improved IC from GH!

Beastly she is. Packaged so well that I'm afraid to remove her entirely from its packaging.

I've amassed quite the collection of aftermarket performance parts these last 6mo.'s or so......

Looks like I'll be pestering my mechanic pal for some lift time the Spring.

Exciting somehow downplays my enthusiasm at this newest offering for our platform!

Thanks to Matt and his entire crew over at Gearhead for continuing down that mod path and remaining committed to this product development for over 2yrs now!

Nice to see this having come to fruition!

Bravo fellas, bravo!

Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline nickstewartroc

  • Full Member
  • : Orlando, Florida
  • Thank You
  • -Given: 6
  • -Received: 60
  • Posts: 219
  • Ecobooster
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #192 on: January 17, 2019, 09:37:03 AM »
Seeing it come in the CSF box makes me wonder just how different it is compared to what they are selling already: https://www.ebay.com/itm/CSF-Intercooler-New-Ford-Taurus-Flex-Lincoln-MKS-MKT-2010-2016-6015/122311087071
Current:
2013 Ruby Red Flex Limited EcoBoost, Unleashed Tuned, drop in filter

Gone but not forgotten: 2011 SHO Non-PP in Black Tuxedo Metallic - Catback, DPs, Stoptech Z23s, MDesign CAI, LMS Tune

Offline mattr66

  • Jr. Member
  • Thank You
  • -Given: 0
  • -Received: 99
  • Posts: 38
  • Ecobooster
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #193 on: January 17, 2019, 10:02:14 AM »
Seeing it come in the CSF box makes me wonder just how different it is compared to what they are selling already: https://www.ebay.com/itm/CSF-Intercooler-New-Ford-Taurus-Flex-Lincoln-MKS-MKT-2010-2016-6015/122311087071
Vastly different I can assure you..... we tried putting my core on the tanks on that one and it sucked.  And the one piece inlet tank made it impossible to install without breaking the tab that holds the air cleaner on....  Also their tanks didn't flow enough to support the increased flow of the core.  These factors are why it has been a 3 year project and costs a little more than a stock replacement....

Sent from my Moto Z (2) using Tapatalk


Offline nickstewartroc

  • Full Member
  • : Orlando, Florida
  • Thank You
  • -Given: 6
  • -Received: 60
  • Posts: 219
  • Ecobooster
Re: New Intercooler for Transverse 3.5L Ecoboost
« Reply #194 on: January 17, 2019, 10:04:39 AM »
Seeing it come in the CSF box makes me wonder just how different it is compared to what they are selling already: https://www.ebay.com/itm/CSF-Intercooler-New-Ford-Taurus-Flex-Lincoln-MKS-MKT-2010-2016-6015/122311087071
Vastly different I can assure you..... we tried putting my core on the tanks on that one and it sucked.  And the one piece inlet tank made it impossible to install without breaking the tab that holds the air cleaner on....  Also their tanks didn't flow enough to support the increased flow of the core.  These factors are why it has been a 3 year project and costs a little more than a stock replacement....

Sent from my Moto Z (2) using Tapatalk

Thanks for the update Mat! Figured they would be pretty different
Current:
2013 Ruby Red Flex Limited EcoBoost, Unleashed Tuned, drop in filter

Gone but not forgotten: 2011 SHO Non-PP in Black Tuxedo Metallic - Catback, DPs, Stoptech Z23s, MDesign CAI, LMS Tune

 

* Featured Topics

* Recent Topics

Re: 2013 SHO Throttle Body Adjustment Screw Leaking?
by SHOdded | Today at 03:27:02 AM
:o :o :o  Now we know, LOL....
Re: 802SHO 2010 Build
by SHOdded | Today at 03:25:39 AM
I think people push boundaries all the time.  I do see a good tre...
Re: Hotpipes, Meth Bungs and Nozzles
by ZSHO | Today at 03:20:07 AM
https://www.ecoboostperformanceforum.com/index.php/topic,524.0.html .Z...
Re: Random thoughts for the day
by Black Dream | June 15, 2019, 11:13:04 PM
"Don't you wish you were the person your dog thinks you are&...
Re: Driver side no A/C - Passenger side fine - AFTER blend door change
by SHOdded | June 15, 2019, 09:08:14 PM
No you are in sync2 for sure.  Just a question of myford vs myfor...
Re: SBS 2016 Taurus SHO Build Thread
by 76fomoco | June 15, 2019, 09:06:15 PM
poor vett owners have no clue what they are getting into....on the str...
Re: What have you done to your Ecoboosted vehicle today?
by 76fomoco | June 15, 2019, 08:46:03 PM
6 less now on amazon....on my part!...
MOVED: Hotpipes, Meth Bungs and Nozzles
by ZSHO | June 15, 2019, 09:24:22 AM
This topic has been moved to Meth/Water Injection.https://www.ecoboost...
Re: 2012 MKS Timing Chain Warning light- 5W30 instead of 5W20 Poss Problem?
by Gjkrisa | June 14, 2019, 08:37:49 AM
Sorry to hear.  A timing/water pump job is about 2000$ or less at...
Re: Is This A Factory Muffler?
by SHOdded | June 14, 2019, 04:27:40 AM
Time for glasspacks....
Re: Squeaking a month after spring install
by SHOdded | June 14, 2019, 03:08:06 AM
There was a thread on a similar issue a while back.  Unfortunatel...
Re: "How-To" Rearrange Your Trunk Lid Badging / Emblems....
by bpd1151 | June 13, 2019, 07:33:19 PM
What do you have done to your taillights?My chrome boarders are peelin...
Re: Ford Recalls
by ZSHO | June 13, 2019, 03:48:17 AM
FORD EXPLORER RECALL: SUSPENSION PROBLEMS IN 1.2 MILLION SUVS. Z ...
Re: Articles on Lubrication
by Macgyver | June 12, 2019, 08:25:10 PM
Motorkote for me in all my small engines.In the SHO I have run it but ...
Re: Running on stock tune w/hpfp?
by Macgyver | June 12, 2019, 08:15:21 PM
Good news to all that are interested.. After clearing the p013a code a...

Back to top