Police Interceptor centre caps

[20ecoboost10]

I recently purchased some used Interceptor wheels and have a question for those that have them. When my centre caps are cliped on too the lug nuts there is a gap between the wheel and cap that is wider than what I was expecting. Can someone measure what gap they have or post a picture.
I have this style of centre caps

Thanks

[ZSHO]

There seems to be a gap within some of the caps IIRC!
Im hoping others will chime in!  Z

https://www.ecoboostperformanceforum.com/index.php/topic,8613.0.html

[GIGANTORE]

Yup. Have them on mine too. It seems odd but is normal. Just make sure the gaps are even all the way around.

[WhitePlatinumSHO]

There are two types of caps available. The type shown in your photo are for Crown Vic's. They will work, but have a large gap when installed. The other type are the newer style that have a round lip. Still have a slight gap, but not as bad as the Crown Vic caps.

[5ohSHO]

Here is one of mine. I can stick my index finger in the gap.

[PDSHO]

There are two types of caps available. The type shown in your photo are for Crown Vic's. They will work, but have a large gap when installed. The other type are the newer style that have a round lip. Still have a slight gap, but not as bad as the Crown Vic caps.

I have the newer style and they fit tightly to the wheel, they are pricey now compared to the old CV centers.
Greg