Lowered the SHO

[glock-coma]

I can't believe I forgot to post a pic.
I was waiting FOREVER for the 10-12 coilovers to become available.
And my own stupid fault I took everything apart before I had the new parts in hand so my time table was rushed unfortunately.

Anyway, got everything installed
with new H&R springs, struts, shocks, bolts, onetime use nuts etc..

Ride is firm but not overly so,
I do have 255/45/20 so that might be helping.
Alignment was not so straight forward, they had to spin my front right strut mount 180° to get it back in spec.
Rear needed spc bolts, l used
the 84130 and they worked perfectly.

Also changed front rotors/ pad while I was in there.
Repainted the front calipers/brackets with gloss epoxy paint. Didn't do the rears yet.

Pics as required.





Forgot to mention I do have about 
200 extra pounds of audio equipment in the trunk.
So I'm a little lower than usual.
I'll get some measurements shortly

[bpd1151]

Looks stellar!!!!

Sent from my SM-N920V using Tapatalk

[sholxgt]

Looks great!  Perfect rake!

[gtmorgan23]

I really dig it.

That will be one of my for sure mods sometime down the line.

[ZSHO]

Looks Lovely there Glock!    I was wondering what happened!
Btw give it a few hundred miles to break/settle in period! enjoy .Z

[SHOdded]

Very tastefully done

[Colorado-SHOBro]

looks great glock!
i'm also on 255/45/20 lowered. your rear doesn't look much lower  with the extra weight



Sent from my iPhone using Tapatalk

[glock-coma]

Thx guys,
I took some pics for reference.
This is the front measurement taken from the center of the wheel.


Rear from the center of the wheel


Front from the ground
Rear from the ground

[Colorado-SHOBro]

yeah you're about 1/4" lower all around actually. id almost expect you to be higher up front due to having fresh struts vs my 40k oem's. interesting
Front:

rear



Sent from my iPhone using Tapatalk

[FoMoCoSHO]

Hey Glock,

Do you happen to have the part numbers for your struts and shocks?

Car looks great and it appears you still have a little rake?

[glock-coma]

Hey Glock,

Do you happen to have the part numbers for your struts and shocks?

Car looks great and it appears you still have a little rake?

Thx FoMoCoSHO, still a little rake.

Struts, unfortunately don't remember which is left or right


Upper mount same on both sides.

Shocks same on both sides

[FoMoCoSHO]

And my confusion deepens...

Tasca says you have struts from two different suspension codes in the front...

https://www.tascaparts.com/auto-parts/2011/ford/taurus/sho-trim/3-5l-v6-gas-engine/front-suspension-cat/struts-and-components-scat

Am I reading that wrong?

[FoMoCoSHO]

Then I'm like, Oh FoMoCoSHO your are a dumb*** because Glock has a 2010 but...

https://www.tascaparts.com/auto-parts/2010/ford/taurus/sho-trim/3-5l-v6-gas-engine/front-suspension-cat/front-suspension-scat

Once again, two suspension codes?

[SHOdded]

See the most current parts numbers here:
https://www.fordpartsgiant.com/parts-list/2011-ford-taurus/front-suspension-struts-and-springs.html?Filter=(38591;30393;43021)

Dealer listings are usually confusing.  When confused, I head over to FordPartsGiant.com.  LOL

[Linemonkey]

Looking great! I have a PP and didn't expect much, other than the lowered stance. I was shocked at the performance gains. It's like a different car. Anyone considering these springs, do it.

Sent from my SAMSUNG-SM-G930A using Tapatalk