• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

PCV valve line.

Started by Macgyver, October 07, 2017, 03:58:37 PM

Previous topic - Next topic

Macgyver

I am gonna install my catch can and wanted to use a factory line so its just cut/splice and snap into place so to speak.

Is this the correct line? 2015 SHO. Also, besides going to my local dealer. Is there a good forum sponsor I can use?

http://www.fordparts.com/Commerce/PartDetail.aspx?n=0ZFheNlLcr2r7B0YxYddrA%3d%3d&id=431443155&m=2&search=true&year=2015&make=Ford&model=Taurus

Also. I need a one way valve. Any recommendations for the factory line diameter?

ZSHO

#1
That's the correct hose!!  Heat gun or utility knife is preferred in order to release the connectors. 
I used a utility knife a while back which worked like a charm.  Z

Which OCC R U going to use? 

PICS Below highlighted in Red.
 
PCV HOSE - FORD (AA5Z-6C658-B)
   $13.09





https://parts.levittownfordparts.com/oem-parts/ford-pcv-hose-aa5z6c658b/?c=Zz1lbWlzc2lvbi1zeXN0ZW0mcz1lbWlzc2lvbi1jb21wb25lbnRzJmk9S0QwOTIxNzUmcj0xMSZhPWZvcmQmbz10YXVydXMmeT0yMDE1JnQ9c2hvJmU9My01bC12Ni1nYXM%3D


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Macgyver

#2
Thank you for the timely response. I know this is a simple mod. I just wanted to make sure it was correct.

I am going to keep the connectors and just splice into the line. Thats why I want a spare line. I dont trust the dealer near me so if she goes into service. The CC is coming out.

I have a Saikou Michi unit left over from another car. Basically brand new.

No preference on a one way valve? Or is in not needed on the PCV line side sine that is already a check valve.

Macgyver

#3
I am going to use two of these in Black. They are extremely well built. Not totally awesome compared to some of the kits out there but to do a twin catch can setup for around $100. Not bad.

https://www.ebay.com/itm/391711465368

Here is a pic of one installed on my Nissan Juke.