• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Catch Can installed and dealer warranty

Started by jbrown9999, October 04, 2017, 11:50:11 PM

Previous topic - Next topic

jbrown9999

Has anyone had a Catch Can installed on an under warranty SHO and went in for dealer maintenance?

If you did, what reaction did you get?
2016 Ford SHO w/ PP w/ SCT X4 w/ Gearhead tune,
MDesign CAI, non-noise maker pipe
Gapped/colder plugs, Thermostat w/ Water Wetter
MSD COPS, aFe Silver Bullet intake spacer
UPR catch can, BOV to atmosphere mod

SHOme

I had no issue.

Sent from my XT1585 using Tapatalk

2014 SHO, PP 3 bar, 160 T Stat, Livernois v10 Tune, UPR catch can. MDesign CAI

ZSHO

#2
The Dealer actually suggested getting an OCC.  Z


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

glock-coma

Depending on the type/manufacturer of the occ they probably won't even notice.
2010 red candy metallic non PP 402B
AJPTURBO 2 BAR Tune Stock 14.1@100.3 / Tuned 12.83@107.7
K&N panel, RX OCC, Sp-534 @.30 Tint 50%F-35%R BOV bypass
1997 SHO silver frost (sold)
1990 SHO triple black 5-speed (saved my life)

gtmorgan23

Which catch can installs the easiest or is the most recommended for the SHO?
2019 Edge ST "Phasma"
JLT Catch Can

glock-coma

Quote from: gtmorgan23 on October 05, 2017, 09:29:24 AM
Which catch can installs the easiest or is the most recommended for the SHO?
Upr is probably the easiest, the jury is still out on which one is the most effective.
I'm currently running the RX OCC with great results, but the install is definitely more involved.

http://www.uprproducts.com/sho-billet-dual-valve-catch-can-ecoboost-09.html

http://teamrxp.com/products/2011-2014-ford-f150-ecoboost-complete-kit-factory-fitiings
2010 red candy metallic non PP 402B
AJPTURBO 2 BAR Tune Stock 14.1@100.3 / Tuned 12.83@107.7
K&N panel, RX OCC, Sp-534 @.30 Tint 50%F-35%R BOV bypass
1997 SHO silver frost (sold)
1990 SHO triple black 5-speed (saved my life)

jjc155

interested in this also, but for my 2017 f150 3.5EB.

J-
2017 F150 XLT Sport SCREW 4x4, Stock 3.5EB.

SHOdded

The Rx setup might be for you, this video by FordTechMakuloco goes into details
https://www.youtube.com/watch?v=v6h_FOzFMcs
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Colorado-SHOBro

Quote from: jbrown9999 on October 04, 2017, 11:50:11 PM
Has anyone had a Catch Can installed on an under warranty SHO and went in for dealer maintenance?

If you did, what reaction did you get?
i was very conscious of where i put my can to keep it discrete on dealer visits. i've had it in 3 times for service and never a word about it.  full details here
http://www.ecoboostperformanceforum.com/index.php?topic=7370


Sent from my iPhone using Tapatalk
11' SHO Tuxedo Metallic black-non PP | Highly sophisticated high altitude custom AJP Turbo E30 3Bar tune w/Wastegate mod | Cat'd ceramic PPE downpipes |170 stat| SP542 plugs .028 | PP trans cooler | H&R springs | RX catch can

12.8@108 @ 6,000ft DA.

jbrown9999

Ok, my UPR catch can is installed.  For those who have this catch can, has anyone installed a valve in the bottom to make it easier to drain during maintenance?  I'd really like to install a valve and a tube running down near oil drain so I can just have it going in the catch for the waste oil.
2016 Ford SHO w/ PP w/ SCT X4 w/ Gearhead tune,
MDesign CAI, non-noise maker pipe
Gapped/colder plugs, Thermostat w/ Water Wetter
MSD COPS, aFe Silver Bullet intake spacer
UPR catch can, BOV to atmosphere mod

Colorado-SHOBro

i used this valve from a rv store and mounted it in this location. pretty slick and i can reach down and drain it with the car on the ground.

not sure where exactly you mounted your can but i'm sure you could do something similar.

Sent from my iPhone using Tapatalk
11' SHO Tuxedo Metallic black-non PP | Highly sophisticated high altitude custom AJP Turbo E30 3Bar tune w/Wastegate mod | Cat'd ceramic PPE downpipes |170 stat| SP542 plugs .028 | PP trans cooler | H&R springs | RX catch can

12.8@108 @ 6,000ft DA.

jbrown9999

Well, mine is mounted higher but I could just use a longer hose.  The best part is, the house allows you to visually see how full it is.
2016 Ford SHO w/ PP w/ SCT X4 w/ Gearhead tune,
MDesign CAI, non-noise maker pipe
Gapped/colder plugs, Thermostat w/ Water Wetter
MSD COPS, aFe Silver Bullet intake spacer
UPR catch can, BOV to atmosphere mod