• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Blown Motor - 2013 SHO

Started by m3dragon, June 20, 2017, 03:24:04 PM

Previous topic - Next topic

m3dragon

Seeing if the community out there can lend a hand. My 2013 SHO with 59K motor went BOOM. Had a tune on it from Leading Edge who is not longer around as of 3 months and was a poor recommendation of Eco Power Parts.

Trying to find a motor 2013-15 with around the same mileage. Ebay is the usual and shop that has the car is calling the parts network.

Ford wants to much for a new motor.

Any assistance on a motor shoot me a PM please.

Cause of issues stems back to October 2016 when data logging for leading edge Eric (HARSH WORDS HERE) removed the limiter allowing the car to go to 7200 before I shifted it. Car seemed fine but had idle issues and dead spots which had been working on fixing sense that. Now 10K later under moderate acceleration and motor went boom. Sounds like the piston skirt issue.

StealBlueSho

#1
Geeze... sorry to hear about that!! Seems like MOST people have their best luck finding one at a salvage yard...

Another guy with a 2010 had the piston in cylinder 6 melt using an 87 octane canned tune from SCT.

Quite a few motors have gone belly up recently....

m3dragon

I am going to ping Ford as well to see if they will do anything. Long hail marry but you never know.

SHOdded

Sorry to hear, but yeah used is the cheapest way to go right now.  The only good thing is 2013+ engines are cheaper to get than 2010-12.  IdK if remanned engines are any cheaper than new.

Car-part.com may be a good place to start looking.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

m3dragon

I went with them based on recommendation from Eco power parts vs Unleashed. So bad advise lead to bad overall. So don't buy from eco power parts if anyone reads this.

I have been looking at Car-part.com and ebay. Not much. Any cars to part are not up for auction yet either.

StealBlueSho

Quote from: m3dragon on June 20, 2017, 05:20:44 PM
I went with them based on recommendation from Eco power parts vs Unleashed. So bad advise lead to bad overall. So don't buy from eco power parts if anyone reads this.

I have been looking at Car-part.com and ebay. Not much. Any cars to part are not up for auction yet either.

What general location are you looking?

FoMoCoSHO

Quote from: m3dragon on June 20, 2017, 05:20:44 PM
I went with them based on recommendation from Eco power parts vs Unleashed. So bad advise lead to bad overall. So don't buy from eco power parts if anyone reads this.

I have been looking at Car-part.com and ebay. Not much. Any cars to part are not up for auction yet either.
While unfortunate, blaming EPP because he recommended LET in good faith doesn't make him responsible.

He is also the founder and owner of this forum so I'd put a pin in the unproven accusations ...motors blow for all sorts of reasons including no reason at all. Stockers blow up from time to time as well.

IMO, one time to 7200 isn't an automatic death sentence for the 3.5 which is based on the 3.5 duratec.

If you don't believe me, call up super six motorsports and ask them what they think.




m3dragon

Quote from: FoMoCoSHO on June 20, 2017, 06:11:07 PM
Quote from: m3dragon on June 20, 2017, 05:20:44 PM
I went with them based on recommendation from Eco power parts vs Unleashed. So bad advise lead to bad overall. So don't buy from eco power parts if anyone reads this.

I have been looking at Car-part.com and ebay. Not much. Any cars to part are not up for auction yet either.
While unfortunate, blaming EPP because he recommended LET in good faith doesn't make him responsible.

He is also the founder and owner of this forum so I'd put a pin in the unproven accusations ...motors blow for all sorts of reasons including no reason at all. Stockers blow up from time to time as well.

IMO, one time to 7200 isn't an automatic death sentence for the 3.5 which is based on the 3.5 duratec.

If you don't believe me, call up super six motorsports and ask them what they think.

The motor blowing is not his fault and nor did I say it was his fault. That was entirely leading edge.  I am however allowed to voice my opinion and experience as the comments he made when i called to order all my parts dissuaded me from Unlesashed who was the top "tuner" at the time and he did carry them.




DerricksSho

Check out GotEngines.com I found mine on there with 14,000 miles 2400 dollars I like you went full on EcoBoom!! 70 degrees to 32 at night on  E blend and it didnt like it pulled the motor and you can look threw it!! best of luck to you.
BrewCityBoost tuned,3 Bar, LMS thermostat
CAI M-Design upgraded stock turbo's
LMS down pipes (Catless) 3" Custom exhaust
H&R springs with spacers 275 40/20 4 corners Power Stop drilled and slotted rotters.... MODS must go on!!

Macgyver

Buy a built motor from Livernois. Now you are talking.

m3dragon

Quote from: Macgyver on June 20, 2017, 09:04:39 PM
Buy a built motor from Livernois. Now you are talking.

14K already called. Cost as much as the value of the car.

ZSHO

I recall you having some issues with your Turbos a while back!!.
Did you ever upgrade or have them changed out ?
Best of luck on a smooth Transition. Z


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Vortech347

Where you out of the 5/60k or did they catch you had a tune?
Matt H.
2013 SHO Performance Pack, Daily, AJPTurbo tuned
2003 SVT Cobra 497rwhp/491rwtq, Self tuned, Cruiser
1990 Mustang GT 570rwhp/530twtq, Self tuned, Open Track
2017 F150 XLT 5.0

68_GT

I just ordered a bran new 3.5 long block from Ford for $4,600. Well $5,600 - $1k ill get back when I send my blown core in.

If you want to go that route go to SVTPerformance forums register, and find vendor Auto Nation Ford White Bear Lake (formerly known as Tousley Ford) and go from there.

They sell OEM Ford part for anything for 10% over cost.

EPP led me to Unleashed for tuning since I ordered his turbo sections for my rebuild. Waiting on the turbo upgrades and new tuner device now.
2013 PP SHO LMS 93V10 tune, 170* T stat, 3bar, K&N drop in, plugs re-gapped, 4in exhaust tips.
UPDATE - 130K miles =blown engine. Unleashed tune and EBPP upgrade turbo billet wheels / Turbo Smart WGA's on a bran new long block. Let's get this SHO on the road !

2013 Fusion Titanium 2.0 EB daily driver ;) - LMS 93 tune and CPE intercooler

EcoPowerParts

I am sorry to hear about your engine blowing, when we discussed this on the phone last week you indicated that you had done some data logging and tune revisions with Erik back in 10/16 and then life happened and you got busy. Your email indicated that you were unhappy with the tune since the beginning. I'm sorry for your tune difficulties, Erik is an awesome guy, he just had to change directions instead of owning a shop.

As others have said car-part.com is probably the least expensive option but Auto Nation Ford White Bear Lake can sell at a decent price. You might try and contact Ryan Brown on facebook and see if he's got any suggestions, he builds quite a few engines: https://www.facebook.com/ryan.singer.18
Mike B | info@ecopowerparts.com
www.ecopowerparts.com -
please use my website for any price quotes and to submit any orders.
Please email me via info@ecopowerparts.com if you have any questions on new or existing orders, PM's via the forum are hard to track your purchase as I can't relate user name to actual name.
https://www.facebook.com/ecopowerparts