thread sealant replacement ?

[TopherSho]

I use this on any flanges/fittings.

http://www.jegs.com/i/Loctite/198/38655/10002/-1?CAWELAID=1710844932&CAGPSPN=pla&CAAGID=44693592161&CATCI=aud-224375369591:pla-191844202151&CATARGETID=230006180039217633&cadevice=c&gclid=Cj0KCQjwwevLBRCGARIsAKnAJvcXKYH-X6ioOuEfJisARrUl-ExNhcRjjJnpdM4-MjCG7d_LC7xkqCYaAqOYEALw_wcB

ah the red stuff!  I saw a number of recommendations from other forums ..

But i decided to pull the trigger without a reply from Snow .. (normally they reply right away .. but this time they have not).   i applied a ring of the e-6000 on the nozzle threads and on the elbow threads. 

FYI the e-6000 does not have a tip.  very messy ..

[TopherSho]

e-6000 held up fine.   loop closed.