Hey everybody! I'm new around here, I hope to become more and more active as I get further along in my build(once it starts), in the mean time I'll try to absorb as much info as I can and contribute when I don't run the risk of talking out of my ass.
So, here's some background. Right now I own a white
`11 SHO that I molested with a few cans on plastidip. I've absolutely fallen in love with the car, however there is about 1500 dollars in cosmetic damages to be repaired, some odd computer glitches that I could see becoming an issue (CC randomly turning off and what feels like the trans down shifting by itself for no reason), plus the brakes get warped every year, and I'm tired of constantly paying to have them turned/replaced. Not to mention, I prefer the look of the front end of the newer models. For these reasons, I intend to trade up to a '13+ Blue SHO some time in the next few months.
I plan on a few cosmetic upgrades(
something similar to this), but I mainly plan on upgrading the engine, suspension, AND sound system. For now I want to focus on engine/suspension upgrades, but if anybody is interested in what I have in mind for the sound system or exterior, I'll be happy to go into the details.
So here's the tentative parts list :
- LMS Stage 2 Kit
- Tuner
- CAI
- Thermostat
- Downpipes
- 3 Bar MAP Sensor
- LMS Methanol Injection Kit
- LMS Rods & Pistons
- Corsa Cat-back Exhaust
- ATP Turbo Upgrade
- EPP Hot Pipes
- TCE Performance Brake Kit
- Megan Racing EZ II Street Coilovers
- DC Power 250A alternator
Is there anything glaringly obvious that I've overlooked? Anything that you all might recommend I add? I plan on installing the CAI, tuner, thermostat, MAP sensor, cat back, coilovers, brake kit, alternator, and possibly the downpipes myself. Then I want to get on, what is probably a long waiting list over at LMS, to install the rods, pistons, alky kit, and turbos. The wait time is good though because it will give me time to accumulate the cash to pay for, what I'm
sure will be a small fortune for the parts and labor. (anybody know roughly how much I could expect to pay in labor for this? I would just like to know so I can prepare my anus)
Has anybody ever installed a conductive fluid level sensor in their meth reservoir?
What kind of 0-60 and 1/4 mile can I realistically expect from these upgrades? Will acceleration still be relative weak from 60-100+? Will the added power make me wet myself when I floor it?
I realize that the rods, pistons, and hot pipes may not be necessary, but I would rather spend the extra cash for the longevity and room for further upgrades, than have the stock internals fail on me and require a rebuild or have to go chasing boost leaks.
I know this is all hypothetical at this point, but the gears are already turning a little. I have a potential buyer for my current SHO, I'm scoping out newer SHO's around me, and I already have most of the pieces for the sound system. There are some things in my life that are in flux at the moment, however, once settled it will be full steam ahead. I'm excited to learn all I can from everyone here, it should be a fun journey! In the mean time, please feel free to poke holes in my plan and call me a noob.