• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Is anybody interested in a group buy on my cutout that I had made?

Started by EcoPowerParts, July 23, 2013, 05:32:59 PM

Previous topic - Next topic

EcoPowerParts

I am going to be able to replicate the exhaust cutout tubing if people want to purchase it.
There are two items that would need to be purchased
1. Sound and Performance cutout - http://www.spracingonline.com/store/
You would order the 3" cutout from Sound and Performance, those I can't have made. They're $399 right now just for the cutout valve.
2. I would be able to offer the piping required to install the cutout in place of the 3rd cat. for $550.00, I would need 5 orders to make this happen. I would have to take a $100 deposit from everyone interested and it would be approximately 30 days before they would ship.

When you receive your exhaust pipe from me you will take it to a muffler shop and have them cut the pipe between the muffler and 3rd cat and weld on the new flanges that will be supplied to bolt in this piece. If needed you could put flanges on the 3rd cat to allow for easy reinstallation in the future.
If you're interested please let me know.

The pictures and discussion of the piping and cutout are in this topic:
http://ecoboostperformanceforum.com/index.php?topic=695
Mike B | info@ecopowerparts.com
www.ecopowerparts.com -
please use my website for any price quotes and to submit any orders.
Please email me via info@ecopowerparts.com if you have any questions on new or existing orders, PM's via the forum are hard to track your purchase as I can't relate user name to actual name.
https://www.facebook.com/ecopowerparts

adelsin

2013 Green Gem SHO PP, all available options.

geswek


crash712us

Mike can you post the length of this pipe? As with the corsa exhaust I might have remove or move back X-pipe.

2011 tuxedo black non pp, LMS stage 5, Corsa cat back, LMS down pipes, Airaid, Alky control meth injection, Megan Racing coil overs, EBC rotor&pads, Mobsteel grill, 2013 trans cooler. 403whp 417wtq 12.25 @ 110

EcoPowerParts

Quote from: crash712us on July 23, 2013, 09:58:45 PM
Mike can you post the length of this pipe? As with the corsa exhaust I might have remove or move back X-pipe.
I'll get some measurements for you soon :)
Mike B | info@ecopowerparts.com
www.ecopowerparts.com -
please use my website for any price quotes and to submit any orders.
Please email me via info@ecopowerparts.com if you have any questions on new or existing orders, PM's via the forum are hard to track your purchase as I can't relate user name to actual name.
https://www.facebook.com/ecopowerparts

FoMoCoSHO

Definitely! Being able to keep my stock exhaust and having an open exhaust when needed sounds like the best of both worlds.

Motohead

2012 EB limited CAI,CATLESS DOWNPIPES,LMS 93++ tune
13.4 @101 150,000 miles and goin strong
             
2016 EB limited CAI,CATLESS DOWNPIPES,LMS 93++ tune
13s @85,000 miles and goin strong

EcoPowerParts

Sorry, I wasn't able to put a group buy together. I can reproduce it one off but it's $1200 for the exhaust work and $400 for the cutout.
Mike B | info@ecopowerparts.com
www.ecopowerparts.com -
please use my website for any price quotes and to submit any orders.
Please email me via info@ecopowerparts.com if you have any questions on new or existing orders, PM's via the forum are hard to track your purchase as I can't relate user name to actual name.
https://www.facebook.com/ecopowerparts

FoMoCoSHO

Quote from: 4DRHTRD on October 18, 2013, 11:31:40 AM
Sorry, I wasn't able to put a group buy together. I can reproduce it one off but it's $1200 for the exhaust work and $400 for the cutout.

What would you say the difference in power would be between the cutout and catted downpipe with stock exhaust?

I like how the stock setup sounds and none of the aftermarket solutions have got me very excited, especially if I wind up with unwanted noise.

EcoPowerParts

I picked up 37 hp with the cutout open

Sent from my SCH-I545 using Tapatalk

Mike B | info@ecopowerparts.com
www.ecopowerparts.com -
please use my website for any price quotes and to submit any orders.
Please email me via info@ecopowerparts.com if you have any questions on new or existing orders, PM's via the forum are hard to track your purchase as I can't relate user name to actual name.
https://www.facebook.com/ecopowerparts

FoMoCoSHO

Quote from: 4DRHTRD on October 20, 2013, 10:22:31 PM
I picked up 37 hp with the cutout open

Sent from my SCH-I545 using Tapatalk

Wow....37 HP, its gorgeous, keeps my car quiet except when needed...

Maybe it is worth 1400 bucks...

EcoPowerParts

When tuned in 100 octane it was worth .2 in the 1/4

Sent from my SCH-I545 using Tapatalk

Mike B | info@ecopowerparts.com
www.ecopowerparts.com -
please use my website for any price quotes and to submit any orders.
Please email me via info@ecopowerparts.com if you have any questions on new or existing orders, PM's via the forum are hard to track your purchase as I can't relate user name to actual name.
https://www.facebook.com/ecopowerparts

2Canches


EcoPowerParts

Quote from: 2Canches on October 21, 2013, 01:35:42 AM
How much for my 3.5L twin? Truck.
You have it easy, just weld in a regular Y pipe and buy the cutout from spracingonline.com
Mike B | info@ecopowerparts.com
www.ecopowerparts.com -
please use my website for any price quotes and to submit any orders.
Please email me via info@ecopowerparts.com if you have any questions on new or existing orders, PM's via the forum are hard to track your purchase as I can't relate user name to actual name.
https://www.facebook.com/ecopowerparts

FoMoCoSHO