• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

ProMeth Says Hello - Manufacture of Ecoboost Water Methanol Injection Systems

Started by PROMETH, October 12, 2016, 05:06:06 PM

Previous topic - Next topic

PROMETH

Quote from: SHOurpp on October 20, 2016, 09:04:11 PM
i am looking for a meth/water tank that fits under the hood of a sho
so you have any or kits?

I have these in stock. Here's a link to our page.

http://prometh.com/collections/tanks/products/example-product-02?variant=10679958659

Features Include:

3 Quart
Brass vent
Level sight gauge
Plastic screw on cap
Mounting hardware
Blow molded construction
Made from high density polyethylene
Will not stain or discolor as white tanks
100% methanol compatible
Dimensions: 8.75" tall x 8.75" wide 4.25" deep

Special Notes:

Does not include tank outlet fitting shown in picture.
Tank outlet fitting is provided as an option.
Sight level gauge is included but not installed.
Instruction for installing sight level gauge provided.


Website: www.prometh.com
Email: rodney@prometh.com
Hours: Monday-Friday 9am-5:30pm PST
Phone: Phone: 801.447.2559
Instagram: prometh_injection

FoMoCoSHO

Quote from: PROMETH on October 23, 2016, 04:06:20 PM
Quote from: FoMoCoSHO on October 19, 2016, 05:26:38 PM
You guys don't happen to design intercoolers do you?

We really need an efficient FMIC.

No, we do not design intercoolers. Just water methanol injection systems and components. There are plenty of aftermarket intercoolers being made for the Ecoboost engines.
Not for the transverse 3.5....

If you happen to know of someone, please let us know!

PROMETH

Quote from: J-Will on October 22, 2016, 08:01:44 PM
I'm most interested in your controller options.

Can it control multiple lines? One for the direct port setup, and one line for the 7th nozzle (not connected to the distro block of the direct port)

Sent from my Nexus 6P using Tapatalk

We are working on a two stage controller so you can open a solenoid at a separate point.
Website: www.prometh.com
Email: rodney@prometh.com
Hours: Monday-Friday 9am-5:30pm PST
Phone: Phone: 801.447.2559
Instagram: prometh_injection

PROMETH

Quote from: FoMoCoSHO on October 23, 2016, 04:29:32 PM
Quote from: PROMETH on October 23, 2016, 04:06:20 PM
Quote from: FoMoCoSHO on October 19, 2016, 05:26:38 PM
You guys don't happen to design intercoolers do you?

We really need an efficient FMIC.

No, we do not design intercoolers. Just water methanol injection systems and components. There are plenty of aftermarket intercoolers being made for the Ecoboost engines.

I wouldn't know of anyone. If its not available you can always build an intercooler. Many of the race cars I work with build the intercooler as they need it.
Not for the transverse 3.5....

If you happen to know of someone, please let us know!
Website: www.prometh.com
Email: rodney@prometh.com
Hours: Monday-Friday 9am-5:30pm PST
Phone: Phone: 801.447.2559
Instagram: prometh_injection

midnightSun

Quote from: PROMETH on October 23, 2016, 04:14:21 PM
Quote from: midnightSun on October 19, 2016, 11:33:49 PM
DIRECT PORT so this looks to be injecting meth in all cyls at the sometime?
What is the advantage of this?
In short. Direct port allows you the precisely control how much water methanol is delivered into each cylinder.

These injectors don't seem to be controlled individually. So i'm asking why this is beneficial? It would seem one is using 5x the necessary meth. Soo do you have plans to use Electronic Fuel injection?
"I'm 30 min away, i'll be there in 10"
2016 Explorer Sport 3bar 93 tune.
Continental ZRY summer tires.
I pull a 30' race trailer with this little SUV at times.
2x Regional Champ!

Frozen Blue

It ensures even distribution into all cylinders. This way the front cylinders won't receive more than the cylinders at the rear of the intake manifold. Uneven flow may or may not be an issue. We have no idea unless someone tests a transverse 3.5 intake manifold.
2013 SHO non-pp
3 bar Map, 160° tstat
Powerstop Z23 rotors/pads
LMS v10

J-Will

Quote from: midnightSun on October 25, 2016, 01:30:36 AM
Quote from: PROMETH on October 23, 2016, 04:14:21 PM
Quote from: midnightSun on October 19, 2016, 11:33:49 PM
DIRECT PORT so this looks to be injecting meth in all cyls at the sometime?
What is the advantage of this?
In short. Direct port allows you the precisely control how much water methanol is delivered into each cylinder.

These injectors don't seem to be controlled individually. So i'm asking why this is beneficial? It would seem one is using 5x the necessary meth. Soo do you have plans to use Electronic Fuel injection?
Different size injectors help regulate an even spray. You actually use less meth, the injectors are much smaller

Sent from my Nexus 6P using Tapatalk

2014 Factory Order SHO (non pp) Deep Impact Blue
Gearhead Automotive Performance Tune
3-bar
SP-542 plugs w/ GH gap

SHOurpp

nice tank .not sure where it would fit at
hopefully someone has location pictures or install tips to move that along.
Quote from: PROMETH on October 23, 2016, 04:27:18 PM
Quote from: SHOurpp on October 20, 2016, 09:04:11 PM
i am looking for a meth/water tank that fits under the hood of a sho
so you have any or kits?

I have these in stock. Here's a link to our page.

http://prometh.com/collections/tanks/products/example-product-02?variant=10679958659

Features Include:

3 Quart
Brass vent
Level sight gauge
Plastic screw on cap
Mounting hardware
Blow molded construction
Made from high density polyethylene
Will not stain or discolor as white tanks
100% methanol compatible
Dimensions: 8.75" tall x 8.75" wide 4.25" deep

Special Notes:

Does not include tank outlet fitting shown in picture.
Tank outlet fitting is provided as an option.
Sight level gauge is included but not installed.
Instruction for installing sight level gauge provided.



duel 3 inch cat less down pipes
sct x4- as a scanner/logger only
3 bar map
hp tuners
both bovs vta

glock-coma

I'm guessing with the mdesign intake setup there would be enough room next to it to mount this tank. You would just need to fab a bracket.
2010 red candy metallic non PP 402B
AJPTURBO 2 BAR Tune Stock 14.1@100.3 / Tuned 12.83@107.7
K&N panel, RX OCC, Sp-534 @.30 Tint 50%F-35%R BOV bypass
1997 SHO silver frost (sold)
1990 SHO triple black 5-speed (saved my life)

J-Will

Quote from: glock-coma on October 25, 2016, 12:21:17 PM
I'm guessing with the mdesign intake setup there would be enough room next to it to mount this tank. You would just need to fab a bracket.

Think the battery is almost 9" tall? Can't mount that tank sideways, the cap has to be on top. Our height requirement is the same as the battery

Sent from my Nexus 6P using Tapatalk

2014 Factory Order SHO (non pp) Deep Impact Blue
Gearhead Automotive Performance Tune
3-bar
SP-542 plugs w/ GH gap

SHOdded

2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

J-Will

Quote from: SHOdded on October 25, 2016, 02:49:24 PM
The battery is spec'd at 7.63 inches in height

So close!  I dont think that tank will work.  I'm all for being wrong though.
2014 Factory Order SHO (non pp) Deep Impact Blue
Gearhead Automotive Performance Tune
3-bar
SP-542 plugs w/ GH gap

glock-coma

From what I remember the bottom of the stock air box sits lower than the battery tray.
2010 red candy metallic non PP 402B
AJPTURBO 2 BAR Tune Stock 14.1@100.3 / Tuned 12.83@107.7
K&N panel, RX OCC, Sp-534 @.30 Tint 50%F-35%R BOV bypass
1997 SHO silver frost (sold)
1990 SHO triple black 5-speed (saved my life)

hawkeye93

Had a nice phone conversation with Rodney, the owner of ProMeth (formerly Alcohol Injection Systems) today.  Super nice guy, very informative & helpful.  And thanks to Renee for helping with my order.  I ordered a 3 gallon tank for my upcoming meth installation.  Plan to do something similar to the trunk install on Alky's Facebook page.  With meth & AJP's EBC brakes, I'm getting excited for next track season!
2015 Ford Taurus SHO PP 12.219@112.84
PPE catless DP, Gearhead IC, SP-534, Reische 170, 3 bar, hybrid meth system, tunes from Unleashed, Livernois, Brew City Boost & AJP

1965 Ford Mustang Convertible 289 4V/T5Z/3.55
1955 Ford Fairlane Club Sedan 272 4V/Fordomatic

SHOdded

2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!