Just ordered DownPipes from LMS

[ClearwaterSHO]

@ ClearwaterSHO I was curious if you received your DP? 
FYI UPDATE - All of the LMS DP come with the necessary Hardware pack with Bolts.
If by any reason the hardware did not come with your order to call 313-561-5500 ext 1.  Z

   

Hi, Z! I went with a different set. LMS said I had to use my current hardware and order gaskets. I went with the Stainless DP's. Should be here next week. Thinking DPs, and a nice ETune and this girl is gonna be moving!

[ZSHO]

Ahh the Stage 3 DP which will require an 02 extender due to the improper location of the 02 bung.  Z

[ClearwaterSHO]

Ahh the Stage 3 DP which will require an 02 extender due to the improper location of the 02 bung.  Z

Do you know the part number for the 02 extender so I can go ahead and order it?

[ZSHO]

Ahh the Stage 3 DP which will require an 02 extender due to the improper location of the 02 bung.  Z

Do you know the part number for the 02 extender so I can go ahead and order it?

I would try contacting SWorks as they should have it readily available .Z
   https://www.ecoboostperformanceforum.com/index.php/topic,6503.msg118040.html#msg118040

[ClearwaterSHO]

Ahh the Stage 3 DP which will require an 02 extender due to the improper location of the 02 bung.  Z

Do you know the part number for the 02 extender so I can go ahead and order it?

I would try contacting SWorks as they should have it readily  available .Z
   https://www.ecoboostperformanceforum.com/index.php/topic,6503.msg118040.html#msg118040

You're amazing Z. I can't thank you and everyone else enough to the help. I'll reach to them now.

[FistyMcgee]

You'll need to buy bolts, nuts and washers for where the dp's hookup to the catback part of the exhaust. My LMS dp's didn't come with any.

Do you know what size, thread count, etc. bolts you  bought?

I recall it required a 15mm socket to remove the four bolts. AFAIK.
I would email LMS @ -info@livernoismotorsports.com   .Z

Sent them an email. Thank you! Hopefully they let me know, or they are sending hardware with the pipes. I get gaskets, but no new hardware for that much change is just mean.

When you get a part number, put a link and the part number in here so we don't have to chase it down again, please!

[5ohSHO]

You'll need to buy bolts, nuts and washers for where the dp's hookup to the catback part of the exhaust. My LMS dp's didn't come with any.

Do you know what size, thread count, etc. bolts you  bought?

Sorry about the late response, but I just went to Napa and got a setup that fit the holes. I don't really remember what the details were.