• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Need help locating the fuel pressure sensor on my 2013 SHO...

Started by ddlopes, July 06, 2016, 05:35:29 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

ddlopes

July 06, 2016, 05:35:29 PM
I've looked everywhere but, I can't locate the fuel pressure sensor. Could someone point me in the right direction? Thanks for your time....
2013 SHO P/P mods: EcoPower Parts dual CAI, 3 bar, PPE catted down pipe, SCT X4, 170 degree thermostat, SNOW PERFORMANCE methanol stage 3 with ProMeth staineless steel braided lines, AeroForce gauges, Hot pipes, custom boost activated cutout xpipe, tial bov, Tial Wastegate mod, GH intercooler, MSD coils, AFE throttle spacer, UPR catch can, Rovos Durban wheels, AJP tuned to 389hp and 503trq on mustang dyno

SHOdded

#1
July 06, 2016, 06:11:31 PM
Are you looking for the Fuel Rail Pressure Sensor?  It is located underneath the Intake Manifold


Removal and Installation

WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.

WARNING: Before working on or disconnecting any of the fuel tubes or fuel system components, relieve the fuel system pressure to prevent accidental spraying of fuel. Fuel in the fuel system remains under high pressure, even when the engine is not running. Failure to follow this instruction may result in serious personal injury.

Release the fuel system pressure. For additional information, refer to Section 310-00 .
Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
Remove the intake manifold. For additional information, refer to Section 303-01B .
Disconnect the Fuel Rail Pressure (FRP) sensor electrical connector.
Remove the FRP sensor.
* To install, tighten to 33 Nm (24 lb-ft).
To install, reverse the removal procedure.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

ddlopes

#2
July 06, 2016, 06:17:53 PM
Exactly what I'm looking for thanks. I hope there's access to the harness ...
2013 SHO P/P mods: EcoPower Parts dual CAI, 3 bar, PPE catted down pipe, SCT X4, 170 degree thermostat, SNOW PERFORMANCE methanol stage 3 with ProMeth staineless steel braided lines, AeroForce gauges, Hot pipes, custom boost activated cutout xpipe, tial bov, Tial Wastegate mod, GH intercooler, MSD coils, AFE throttle spacer, UPR catch can, Rovos Durban wheels, AJP tuned to 389hp and 503trq on mustang dyno

ddlopes

#3
July 06, 2016, 06:31:41 PM
where did you get tis from? is there a downloadable complete repair manual out there for free?
2013 SHO P/P mods: EcoPower Parts dual CAI, 3 bar, PPE catted down pipe, SCT X4, 170 degree thermostat, SNOW PERFORMANCE methanol stage 3 with ProMeth staineless steel braided lines, AeroForce gauges, Hot pipes, custom boost activated cutout xpipe, tial bov, Tial Wastegate mod, GH intercooler, MSD coils, AFE throttle spacer, UPR catch can, Rovos Durban wheels, AJP tuned to 389hp and 503trq on mustang dyno

ZSHO

#4
July 06, 2016, 06:39:19 PM
I think the wire harness are green,white,gray based from this diagram.  Z     https://drive.google.com/file/d/0B8JUL90DXgdid1pST0JFYmFxVl9FRVF6UXN4eXN2aVRvNzg4/view


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

SHOdded

#5
July 06, 2016, 07:09:55 PM
Quote from: ddlopes on July 06, 2016, 06:31:41 PM
where did you get tis from? is there a downloadable complete repair manual out there for free?
I have paid for the manual, probably infringing on copyright, but so be it, till they tell me to cease & desist :)  EBay has offers for manuals on CD/DVD, I think under $15, pretty darned close to free.  Or you can subscribe to online services from Motorcraft, AllData, Chiltons etc for your specific year.  Motorcraft of course is up to date with the latest everything for every MY, but AllData/Chiltons only go up to 2014/2015 MY I think.  Not a biggie, but some small changes DO happen from MY to MY that can trip you up.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

ddlopes

#6
July 06, 2016, 08:43:26 PM
Quote from: ZSHO on July 06, 2016, 06:39:19 PM
I think the wire harness are green,white,gray based from this diagram.  Z     https://drive.google.com/file/d/0B8JUL90DXgdid1pST0JFYmFxVl9FRVF6UXN4eXN2aVRvNzg4/view
[/quote


according to this diagram would the center wire be the fuel pressure sensor input?
2013 SHO P/P mods: EcoPower Parts dual CAI, 3 bar, PPE catted down pipe, SCT X4, 170 degree thermostat, SNOW PERFORMANCE methanol stage 3 with ProMeth staineless steel braided lines, AeroForce gauges, Hot pipes, custom boost activated cutout xpipe, tial bov, Tial Wastegate mod, GH intercooler, MSD coils, AFE throttle spacer, UPR catch can, Rovos Durban wheels, AJP tuned to 389hp and 503trq on mustang dyno
Print
Go Up Pages1
User actions