Snow performance, Stage 3 #320

[Charliemkv]

How's it going guys, i need some help and was wondering if any of you guys running the #320 direct injected stage 3 system, could share your install pics. My main issues is where is the 0-5V wire that i need to splice into and what boost line to T off. 

[Charliemkv]

I Founded out what are my options for the boost source, Thanks to some of Threads here.. now i just need to know what wire i need to splice for the fuel sensor.

[hawkeye93]

It's a blue/brown wire at the ECU, which is buried under the cowl.

[Charliemkv]

It's a blue/brown wire at the ECU, which is buried under the cowl.

I was told this blue wire, Attached to the fuel sensor, would also work.

[hawkeye93]

Yes, it probably will work.  According to my wiring diagram, the sensor goes directly to the ECU/PCM.  The Snow instructions describe a blue/brown wire, and that's what I recall from my ExSport, but my wiring diagrams show a brown/blue wire.  Go figure.

[Charliemkv]

Yes, it probably will work.  According to my wiring diagram, the sensor goes directly to the ECU/PCM.  The Snow instructions describe a blue/brown wire, and that's what I recall from my ExSport, but my wiring diagrams show a brown/blue wire.  Go figure.

Oh okay, I was bit hesitant because my instructions calls for just a blue wire to the blue wire, at the time my mind was like WhAt!! lol.. Thank you for responding tho.