• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

Obd adapter, Bluetooth or wifi?

Started by f8tlSHO, November 22, 2015, 06:58:11 PM

Previous topic - Next topic

f8tlSHO


Quote from: SHOdded on December 26, 2015, 11:57:42 PM
Under Settings, there is an option for Data Logging & Upload.  Then Select What to Log.  This will bring up the PIDs currently being logged, if any.  To bring up the pre-defined list of available PIDs for your vehicle, click on the icon on the top right that looks like 3 stacked tiny squares, and select Add PID to Log.  This is the same list you see when adding gauges for display purposes.  Highlighted in GREEN are what Torque believes applicable to your vehicle.

To add custom PIDs, go back to the main Settings menu, click on Manage extra PIDs/Sensors.  This will bring up the custom PIDs for your vehicle.  To add a custom PID, click on the icon at top right, then select Add custom PID.  Click OK on any warning/informational popups, and now you are ready to define the PID.  Here is a list of PIDs compiled for us (mainly by ecoboostsho):
http://www.ecoboostperformanceforum.com/index.php/topic,3141.0.html

Just remember, the dashboard is independent of the log, setup is required in each place separately.
Thanks, I was hoping someone already had this figured out.


Sent from my iPhone
2013 Non PP Unleashed 93 E20 3 Bar Tune, K&N drop in 12.491 @ 110.96 120's IAT
Now tuned by ajp...looking to go faster
E30 tune on14psi full weight including 2 child seats,race like a real street car.
12.433 @110.8 140's IAT; Mustang Dyno 332hp / 386tq