Display modes - Right Side

[ecoboostsho]

Ha!  Assuming you are referring to FoMoCoSHO's comment  - Well I could tell you what the data was if I happened to catch it in process - which would be very difficult to do since it sounds like it doesn't happen on a regular basis.  You'd have to be sitting  there watching the CAN bus when it happened.  It would be interesting to see what is going on if it truly is sending data on its own.

[SHOdded]

Watching the watchers

[FoMoCoSHO]

Ha!  Assuming you are referring to FoMoCoSHO's comment  - Well I could tell you what the data was if I happened to catch it in process - which would be very difficult to do since it sounds like it doesn't happen on a regular basis.  You'd have to be sitting  there watching the CAN bus when it happened.  It would be interesting to see what is going on if it truly is sending data on its own.

It sent fuel pressure(very low), IAT1,2,CAC, coolant temp, trans temp IIRC.

Everything else was zeroed or dashed out.

[m3dragon]

Still.... There must be a way. My '13 SHO has automatically downloaded some updates on startup. When it did that on two occasions (it told me that it was doing so on the big center screen)... All the info from the center screen was transferred during that time to the right LED screen beside the speedometer... Just saying, no clue as to how.

Probably need access to the code to display items. Drive split, oil temp, boost pressure, and volts would be 4 small gauges I would love to have on the right side. The data is there, just need to program the display in "display mode".

Anyone friends with the tuners like Liverinous or Diablo??

[AJP turbo]

Still.... There must be a way. My '13 SHO has automatically downloaded some updates on startup. When it did that on two occasions (it told me that it was doing so on the big center screen)... All the info from the center screen was transferred during that time to the right LED screen beside the speedometer... Just saying, no clue as to how.

Probably need access to the code to display items. Drive split, oil temp, boost pressure, and volts would be 4 small gauges I would love to have on the right side. The data is there, just need to program the display in "display mode".

Anyone friends with the tuners like Liverinous or Diablo??

That stuff isnt in the tune...i think ur talking about firmware/software within the modules....i would say you have to program with ids but you would also have to have the actual icp software that has been reprogrammed

You want to talk to jmr061...ids lets you program the modules ...but you are talking about completely restructuring the programming for the module.....jmr just adds displays that are built into the clusters he just unlocks it...you are talking about a configureable gauge layout