Fastest Times List
EBPF Official Instagram
Main Menu
Home
Welcome to
Ecoboost Performance Forum
. Please
log in
or
sign up
.
Ecoboost Performance Forum
►
Ecoboost Performance
►
How To Articles
►
"How-To" LED Interior Conversion for 2013 SHO
"How-To" LED Interior Conversion for 2013 SHO
Started by geswek, August 17, 2013, 10:22:21 PM
Previous topic
-
Next topic
Print
Go Down
Pages
1
User actions
geswek
Guest
Logged
"How-To" LED Interior Conversion for 2013 SHO
August 17, 2013, 10:22:21 PM
Last Edit
: August 14, 2015, 10:52:31 PM by geswek
This was performed on a model 2013 SHO, I can't help you with earlier models.
I've completed the project and felt I would just throw this together with a master sheet of what I bought and some photos. It was quite an undertaking and at times very frustrating. I would be prepared to sweat some and probably swear some! I have quantities listed for just about everything you need, be warned this is ONLY for the number of sockets you have. I went through a lot more LED's than that; they are fragile and more than likely your sockets are new just like mine which means putting them in is difficult and sometimes will break them.
The build thread can be found here;
http://www.ecoboostperformanceforum.com/index.php?topic=670.0
You can also see my Picasa gallery with ALL my photographs along the way here;
https://goo.gl/PuFvlr
If you blew the fuse for your map lights and you can't find it in the manual; it is
Fuse 4 - Demand lamps battery saver relay coil
.
I take no responsibility if you blow up, burn down, catch on fire, destroy, or otherwise do something utterly stupid to your car; you are using my information as a reference and at your own risk.
Supply Master List
License Plate
3710-xHP3: 3710 LED Bulb - 3 SMD LED Festoon
Quantity: 2
http://www.superbrightleds.com/moreinfo/led-vehicle-replacement-bulbs/3710-led-bulb-3-smd-led-festoon/239/1135/
Backup Lamp
7.5 High Power 360° Xenon White 921 912 T10 LED Bulbs For Backup Reverse Lights
Quantity: 2
http://goo.gl/2FVY4c
Map Lamp and Dome/Reading Lamp
WLED-xHP5: 194 LED Bulb - 5 SMD LED Wide Angle Wedge Base
Quantity: 5
http://www.superbrightleds.com/moreinfo/miniature-wedge-base/194-led-bulb-5-smd-led-wide-angle-wedge-base/206/919/
Vanity Mirrors
F30-WHP-12V: Fuse LED Bulb - 1 SMD LED Festoon
Quantity: 4
https://www.superbrightleds.com/moreinfo/led-vehicle-replacement-bulbs/fuse-led-bulb-1-smd-led-festoon/243/1162/
Trunk Light
4410-CW9: 578 LED Bulb - 9 LED Festoon
Quantity: 1
https://www.superbrightleds.com/moreinfo/led-vehicle-replacement-bulbs/578-led-bulb-9-led-festoon/237/1123/
Mirror Puddle Lamps
LED Puddle Lights by DAYTIMEbrightlites
Quantity: 2
http://www.daytimebrightlites.com/Puddle_Lights_NL3C.html
Completed Photographs
Rear Passenger Map Light Issue
You will more than likely be plagued with an issue where you put an LED in all (3) sockets and they don't turn off. I discovered the issue to be a lack of resistance and need for a resistor. In discussion with others on my thread, and another thread I found online--I located the parts and what needed to be done. Please read this otherwise you too will have a problem.
First off; you are short on resistance with all three LED's in the assembly; therefore you HAVE to add a resistor to one of the LED's. I chose to use the center LED as it was most easy for me to get too. Here are photo's of what I did; this does require soldering skills! You will see the part I bought at Radioshack and how I added it to the LED.
SHOdded
Forum Supporters
Elite Member
Posts: 16,074
Location: Beltsville, MD
Logged
Re: "How-To" LED Interior Conversion for 2013 SHO
#1
April 06, 2015, 08:46:47 PM
Rear Dome Light LED - resistor install
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights
If tuned: Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!
SHOdded
Forum Supporters
Elite Member
Posts: 16,074
Location: Beltsville, MD
Logged
Re: "How-To" LED Interior Conversion for 2013 SHO
#2
April 22, 2015, 09:55:27 PM
Last Edit
: April 22, 2015, 10:00:19 PM by SHOdded
How to Install LEDs with Resistors in the 2015 SHO Rear Dome Light (thanks to Evilcartman
)
Ford Taurus LED Dome Light Install
Ford Taurus LED Dome Light Install - How to add a resistor to get it to work. I used a 1/4w 470OHM.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights
If tuned: Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!
Print
Go Up
Pages
1
User actions
Ecoboost Performance Forum
►
Ecoboost Performance
►
How To Articles
►
"How-To" LED Interior Conversion for 2013 SHO
User actions
Print