Random thoughts for the day

ZSHO · June 01, 2016, 10:35:51 PM

I have a used noisemaker that i wanted to sell but i thought it would be best to help a fellow member out and as usual give a helping hand by starting a FREE Raffle on the Noisemaker that comes with HPS Couplers and T-Bolts clamp's which cost me roughly over 200.00 for the set,will have complete info pertaining to this last minute idea of mine tomorrow,thanks and have a pleasant evening .Z

Scott4957 · June 01, 2016, 10:40:36 PM

Quote from: ZSHO on June 01, 2016, 10:35:51 PM
I have a used noisemaker that i wanted to sell but i thought it would be best to help a fellow member out and as usual give a helping hand by starting a FREE Raffle on the Noisemaker that comes with HPS Couplers and T-Bolts clamp's which cost me roughly over 200.00 for the set,will have complete info pertaining to this last minute idea of mine tomorrow,thanks Z

Awesome, that's nice of you! So this replaces the elbow/hose combo that comes off the TB down to the IC? I don't have a noisemaker to eliminate in the MKS, but having a metal pipe to tap for meth over the plastic would be nice....maybe extra room to add a 50 shot!?!?!

ZSHO · June 01, 2016, 10:45:49 PM

Quote from: Scott4957 on June 01, 2016, 10:40:36 PM
Quote from: ZSHO on June 01, 2016, 10:35:51 PM
I have a used noisemaker that i wanted to sell but i thought it would be best to help a fellow member out and as usual give a helping hand by starting a FREE Raffle on the Noisemaker that comes with HPS Couplers and T-Bolts clamp's which cost me roughly over 200.00 for the set,will have complete info pertaining to this last minute idea of mine tomorrow,thanks Z

Awesome, that's nice of you! So this replaces the elbow/hose combo that comes off the TB down to the IC? I don't have a noisemaker to eliminate in the MKS, but having a metal pipe to tap for meth over the plastic would be nice....maybe extra room to add a 50 shot!?!?!

The best of my knowledge it should work,its only referenced as a Noisemaker and will certainly have more details for all of ya. Z

ZSHO · June 02, 2016, 10:04:36 AM

FYI this morning after cleaning up the pipe and trying to get it ready noticed the bottom portion of the pipe that connects to the IC slightly bent,you can notice on the above pic's at the very bottom and guess the combo of installing some HPS heavy duty T-bolts clamps and over tightening it led to the issue and truly apologize for any inconvenience in this matter and just dont want to give away something thats misleading and its just not who i am and should of inspected it prior to making this post,guess you live and learn,thanks. Z

ZSHO · June 05, 2016, 03:59:10 PM

I truly had the Distinct honor and privilege to finally meetup with SHOdded after all these year's and it was an honor to shake hands with such a respectable,genuine and well known person in the Ecoboost community such as him and hopefully we can meetup once again in the very near future and an Awesome Guy indeed. Z

SHOdded · June 05, 2016, 10:19:05 PM

If there was ANYTHING lacking, it was that I didn't get to ride in Z's sweet SHO, but it was quite a sight to see it in person

But the exhaust sounds pretty awesome in person, better than any video/audio I have ever seen/heard

ZSHO · June 05, 2016, 10:29:05 PM

Quote from: SHOdded on June 05, 2016, 10:19:05 PM
If there was ANYTHING lacking, it was that I didn't get to ride in Z's sweet SHO, but it was quite a sight to see it in person But the exhaust sounds pretty awesome in person, better than any video/audio I have ever seen/heard

-MANU your much to kind,definitely will save the drivers seat for ya the next time around,only for ya. Z

AJP turbo · June 05, 2016, 10:50:36 PM

👬👨‍❤️‍👨. Alright enough with the new found bromance

SHOdded · June 05, 2016, 11:32:33 PM

LOL

92BlackGT · June 16, 2016, 02:33:54 PM

i went out of town for a TDY this past weekend and my wife decided she was going to drive my car. When the gas tank got low she put in 17 gallons of E85. fantastic, the CEL light is on and the codes are for Lean bank 1 and bank 2. It's looking like easy driving for a bit to drain out this E85. here's to hoping the fuel pumps get through this unscathed... hopefully the ACES IV will help

Scott4957 · June 16, 2016, 02:42:17 PM

Ooops! I would just siphon most of it out. I'm not sure anyone had determined that this pump won't suffer the sticky/black death that the Mazda DISI suffers from. Though I think there where some guys running E85 with aux injectors so maybe that is not an issue with this HPFP.

SHOdded · June 16, 2016, 02:59:39 PM

def drive carefully, shouldn't hurt the fuel system over just one tank, but once below half mark, fill with premium just to dilute it out. If you can pump it out, like Scott suggested, that's great, but you'd need an appropriate container for storage.

FoMoCoSHO · June 16, 2016, 07:31:36 PM

I wouldn't worry about the pump, I've had some pretty high blends.

I'd be most worried about running out of fuel tuned. The good thing is you have octane for days, lol.

I would add 3 extra ounces of aces, and retune the car to stock until you can get the trims below the cel threshold.

They cel should go off once the trims drop and then you can clear the code with one of the obd programs.

It would also be an opportune time to get some logs, lol.

ZSHO · June 16, 2016, 10:00:33 PM

Here's a purdy cool article on Ford Performance,enjoy. Z http://performance.ford.com/enthusiasts/fan-spotlight/2016/06/mustang---cobra-dreams-come-true-for-metro-detroiter-russ-consig.html?cks=432128850&emailid=FP_FASTNEWS.

SHOnUup · June 18, 2016, 12:51:52 PM

We have a big single turbo Ecoboost SHO roaming the earth!!!!

Sent from my SM-N920V using Tapatalk