January 20, 2019, 03:00:49 PM
collapse
collapse

Author Topic: 2013+ intercooler install?  (Read 563 times)

Offline Bronco2fan

  • Full Member
  • : Ft. Hood, Texas
  • Thank You
  • -Given: 16
  • -Received: 22
  • Posts: 53
  • Ecobooster
Re: 2013+ intercooler install?
« Reply #15 on: January 14, 2019, 06:47:51 PM »
I saw on the Ecoboost Facebook page that they have a group buy for the new cooler. Is that the one you're getting or different suppliers? Looks like a quality product.

Sent from my LG-LS998 using Tapatalk

Itís not a group buy. Gearhead is finally shipping their upgraded IC this week. I know myself, Jordan, and BPD1151 placed orders.

Hopefully will have time next week for install.


Sent from my iPhone using Tapatalk
How do we place an order???????????????????????????

Sent from my PH-1 using Tapatalk
I would think you'd have to get a hold of Gearhead and go from there.

I know they're on the Facebook group for sure.

Sent from my LG-LS998 using Tapatalk

2013 Ruby Red Metallic, PP. 150k on her. LMS V11 Tune, 3 bar, Tstat. . 06 F150 Harley-Davidson Edition, 03 Mustang GT Conv, 84 Bronco II, and my 97 Jeep GC Laredo 5.2.

Offline 802SHO

  • Sr. Member
  • : Essex Junction Vermont
  • Thank You
  • -Given: 323
  • -Received: 152
  • Posts: 280
  • Boosted
Re: 2013+ intercooler install?
« Reply #16 on: January 15, 2019, 02:41:12 AM »
Email Sales@GHTuning.Com.  In the subject line put SHO Intercooler Order.  Include your full name, shipping address...which needs to match your billing address and a contact number.  Its 799 + about 75 shipping.  This was posted by Jordan in the New Intercooler for Transverse 3.5 Ecoboost OP
2010 SHO non PP, Alky Control Methonal Injection, SP534 .028, 160 T, Airaid Intake, 3bar, Thunderstorm Catless Downpipes, custom stainless 2.5" catback w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", Aeroforce Interceptor Gauge, Tuned by AJP Turbo

11.833 @ 116.82 New England Dragway 10/14/18 AJP Turbo No DA Correction

Offline SHOdded

  • Administrator
  • Elite Member
  • : Beltsville, MD
  • Thank You
  • -Given: 9787
  • -Received: 3252
  • Posts: 14493
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 1905
  • -Received: 1691
  • Posts: 3277
  • SHOGAZM
Re: 2013+ intercooler install?
« Reply #18 on: January 17, 2019, 09:22:45 AM »
Oh my...... I was woken to the dogs barking, the door bell ringing just now.

Upon heading to the front door, low and behold, Santa arrived with a late package for me.

A brand spanking new and improved IC from GH!

Beastly she is. Packaged so well that I'm afraid to remove her entirely from its packaging.

I've amassed quite the collection of aftermarket performance parts these last 6mo.'s or so......

Looks like I'll be pestering my mechanic pal for some lift time the Spring.

Exciting somehow downplays my enthusiasm at this newest offering for our platform!

Thanks to Matt and his entire crew over at Gearhead for continuing down that mod path and remaining committed to this product development for over 2yrs now!

Nice to see this having come to fruition!

Bravo fellas, bravo!

Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline mrhighcaliber

  • Full Member
  • Thank You
  • -Given: 196
  • -Received: 87
  • Posts: 87
  • Ecobooster
Re: 2013+ intercooler install?
« Reply #19 on: January 17, 2019, 03:00:47 PM »
Oh my...... I was woken to the dogs barking, the door bell ringing just now.

Upon heading to the front door, low and behold, Santa arrived with a late package for me.

A brand spanking new and improved IC from GH!

Beastly she is. Packaged so well that I'm afraid to remove her entirely from its packaging.

I've amassed quite the collection of aftermarket performance parts these last 6mo.'s or so......

Looks like I'll be pestering my mechanic pal for some lift time the Spring.

Exciting somehow downplays my enthusiasm at this newest offering for our platform!

Thanks to Matt and his entire crew over at Gearhead for continuing down that mod path and remaining committed to this product development for over 2yrs now!

Nice to see this having come to fruition!

Bravo fellas, bravo!

Sent from my SM-N950U using Tapatalk
So beautiful . Never thought I would see this moment. A special intercooler developed for our beloved sho platform. The one major performance hindrance; solved.

Any chance you could measure the core thickness? I'm curious as to how much additional volume/ area this new intercooler affords over stock. I think the stock IC is 1.25" in thickness.

Sent from my PH-1 using Tapatalk


Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 1905
  • -Received: 1691
  • Posts: 3277
  • SHOGAZM
Re: 2013+ intercooler install?
« Reply #20 on: January 18, 2019, 11:14:56 AM »
Any chance you could measure the core thickness? I'm curious as to how much additional volume/ area this new intercooler affords over stock. I think the stock IC is 1.25" in thickness.

Apologize for the delay, as I was working the last couple of nights.

Anyhow, just went out and measured it now.....

A full TWO INCHES thick.

Sent from my SM-N950U using Tapatalk


World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline Jordan

  • Full Member
  • : Columbia, Mo
  • Thank You
  • -Given: 66
  • -Received: 178
  • Posts: 248
  • Land Yacht Owner
Re: 2013+ intercooler install?
« Reply #21 on: January 18, 2019, 11:23:59 PM »
Two inches eh? I am familiar with that! Hahaha jokes aside I am trying to assemble my buds together to film the install for those of y'all who haven't received/installed yours. Probably going to be a few days between filming, editing and posting. Supposed to get some bad weather here tonight so that may put a slight hold on those plans.
11.98 @ 113mph Stock HPFP w/ pump fuel e30 tune by AJPTURBO!!! 4350 Da non-corrected time

11.91 @ 116.6mph on C20 tune by AJPTurbo 3000 DA non-corrected time

Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • : New York SHO
  • Thank You
  • -Given: 1180
  • -Received: 2727
  • Posts: 1879
  • Trap Speed of almost 116 mph.
Re: 2013+ intercooler install?
« Reply #22 on: January 19, 2019, 04:40:40 AM »
I think I mentioned this a while back and believe the alternative IC Core Thickness (In) is 1-3/16 = 0.1875" FWIW.  Z

https://www.rockauto.com/en/catalog/ford,2013,taurus,3.5l+v6+turbocharged,1503823,cooling+system,intercooler,12616




« Last Edit: January 19, 2019, 07:23:49 AM by ZSHO »


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|Airaid-Dry-flow-CAI|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline Sbouvia

  • Full Member
  • : Alexandria, VA
  • Thank You
  • -Given: 11
  • -Received: 29
  • Posts: 52
  • Ecobooster
Re: 2013+ intercooler install?
« Reply #23 on: January 19, 2019, 07:26:38 AM »
That IC is packaged way better than my wife’s new Jeep radiator. I’m on my second one shipped to me as first had holes in box and a broken part on bottom of radiator. This one looks ok, but I, going to get it tested before letting Quadratec off the hook. I’d be interested to see the install video/photos and also before and after temps when pushed hard.
« Last Edit: January 19, 2019, 07:43:33 AM by Sbouvia »
~Scott
2013 SHO non-pp. Powerstop Top Cop kit brakes, 3bar map sensor, 93 octane 3bar AJPTurbo tuned.
2002 Jeep Wrangler TJ w/ 2.5" lift stock
1991 F Super Duty 2.5 ton dump truck w/ 7.3IDI

Offline SHOdded

  • Administrator
  • Elite Member
  • : Beltsville, MD
  • Thank You
  • -Given: 9787
  • -Received: 3252
  • Posts: 14493
Re: 2013+ intercooler install?
« Reply #24 on: January 19, 2019, 07:50:30 AM »
:o :o :o
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Offline mrhighcaliber

  • Full Member
  • Thank You
  • -Given: 196
  • -Received: 87
  • Posts: 87
  • Ecobooster
Re: 2013+ intercooler install?
« Reply #25 on: January 19, 2019, 06:24:43 PM »
Any chance you could measure the core thickness? I'm curious as to how much additional volume/ area this new intercooler affords over stock. I think the stock IC is 1.25" in thickness.

Apologize for the delay, as I was working the last couple of nights.

Anyhow, just went out and measured it now.....

A full TWO INCHES thick.

Sent from my SM-N950U using Tapatalk
...good looking out. After working out the math; the new IC Core works out to an exact 60% density increase over the OEM IC. My mental dynamometer is pegging quite an increase in AWHP and increased safety margin from lower i.a.t temps. Super Excited over 2inchs (no homo)

Sent from my PH-1 using Tapatalk


Offline mrhighcaliber

  • Full Member
  • Thank You
  • -Given: 196
  • -Received: 87
  • Posts: 87
  • Ecobooster
Re: 2013+ intercooler install?
« Reply #26 on: January 19, 2019, 06:27:26 PM »
That IC is packaged way better than my wifeís new Jeep radiator. Iím on my second one shipped to me as first had holes in box and a broken part on bottom of radiator. This one looks ok, but I, going to get it tested before letting Quadratec off the hook. Iíd be interested to see the install video/photos and also before and after temps when pushed hard.
Looks like they bowl'd it to your doorstep from a moving delivery truck. Efficient delivery

Sent from my PH-1 using Tapatalk


Offline StealBlueSho

  • Elite Member
  • : Warrenton, VA
  • Thank You
  • -Given: 1977
  • -Received: 1782
  • Posts: 3178
  • I poke at people...
Re: 2013+ intercooler install?
« Reply #27 on: Today at 08:48:15 AM »
Any chance you could measure the core thickness? I'm curious as to how much additional volume/ area this new intercooler affords over stock. I think the stock IC is 1.25" in thickness.

Apologize for the delay, as I was working the last couple of nights.

Anyhow, just went out and measured it now.....

A full TWO INCHES thick.

Sent from my SM-N950U using Tapatalk
...good looking out. After working out the math; the new IC Core works out to an exact 60% density increase over the OEM IC. My mental dynamometer is pegging quite an increase in AWHP and increased safety margin from lower i.a.t temps. Super Excited over 2inchs (no homo)

Sent from my PH-1 using Tapatalk

Matt said it also has a 20% increase in volume.. which is a big part of the reason you need to be tuned correctly for it. Otherwise, you will can potentially get underboost conditions which will trip a CEL.
2016 SHO Performance Package, Firestorm HPFP, 3BAR MAP, AIRAID CAI, 160 Tstat, Corsa Exhaust, HR Lowering Springs, and Gearhead E30 Tuned. Best 1/4 - 12.415 @ 108.95mph (Non-DA Corrected)

SOLD: 2010 Taurus SHO
1/4 Mile PB of 12.273 @ 110.953mph at Capital Raceway (DA Corrected AJPTurbo Tuned)

Offline ddlopes

  • Full Member
  • Thank You
  • -Given: 2
  • -Received: 47
  • Posts: 198
  • Ecobooster
Re: 2013+ intercooler install?
« Reply #28 on: Today at 01:59:33 PM »
Can hot pipes still be used with this intercooler? And does anyone know how many hrs the install will be? I may need to bring the sho to a shop for this install.
2013 SHO P/P mods: Airaid, 3 bar, PPE catted down pipe, SCT X4, 170 degree thermostat, SNOW PERFORMANCE methanol stage 3 with ProMeth staineless steel braided lines, AeroForce gauges, Hot pipes, custom boost activated cutout xpipe, tial bov, Tial Wastegate mod, Rovos Durban wheels, AJP tuned to 433hp and 513trq

 

* Featured Topics

* Recent Topics

Re: New Intercooler for Transverse 3.5L Ecoboost
by Josephm | Today at 02:40:38 PM
This will be huge for towing!!! I am waiting for a couple of install v...
Re: 2013+ intercooler install?
by ddlopes | Today at 01:59:33 PM
Can hot pipes still be used with this intercooler? And does anyone kno...
Re: Ecopowerparts 09-14 F150 widebody kit
by 802SHO | Today at 12:19:16 PM
That looks bad a$$!  It's perfect in all the right spots...i...
Re: What have you done to your Ecoboosted vehicle today?
by BoostfoSHO | January 19, 2019, 05:14:53 PM
New Alky pump ordered from www.Alkycontrols.comI emailed Julio over @ ...
Re: New member here transferring from other forums
by TonyTheTiger57 | January 19, 2019, 03:57:46 PM
No, there isn't a particular reason I like Fords.. It just happen...
Re: Ford Expedition & Lincoln Navigator
by ZSHO | January 19, 2019, 11:01:11 AM
2019 LINCOLN NAUTILUS RECALL ISSUED FOR 2,700 SUVSLincoln SUVs have pr...
MOVED: Toyota ecoboost
by ZSHO | January 18, 2019, 04:26:04 PM
This topic has been moved to Admin-Moderator only discussion.https://w...
Re: Throttle Body Motor assembly
by ZSHO | January 18, 2019, 06:22:19 AM
Feel free to start your own Dedicated thread here! Z https://www.ecobo...
Re: 2012+ timing job
by ZSHO | January 17, 2019, 06:28:58 PM
I believe so!  Z https://drive.google.com/file/d/0B8JUL90DXgdiMTZ...
Re: Random thoughts for the day
by ZSHO | January 17, 2019, 05:16:56 PM
JAN 14, 2019 | FORD MOTOR COMPANY PRESS RELEASEALL-NEW FORD EXPLORER G...
MOVED: Looking for used Cat-Back for A 2014 SHO
by ZSHO | January 17, 2019, 04:25:11 PM
This topic has been moved to Parts for Sale or Wanted.https://www.ecob...
Re: Splash blending e85 to 93
by FiveLeeter918 | January 17, 2019, 01:44:28 PM
Thanks to everyone! To prevent any fuel related issues god forbid I ru...
Re: Livernois Upgrades
by Livernois Motorsports | January 17, 2019, 07:45:34 AM
I just wanted to share my recent experience with Livernois and my 2018...
MOVED: Livernois Upgrades
by SHOdded | January 16, 2019, 08:09:34 PM
This topic has been moved to Livernois Motorsports and Engineering.htt...
Re: Something different?
by SHOdded | January 16, 2019, 04:29:39 PM
LOL, yes, my reference was the first gen V's, since people buy th...

Back to top