Work started on the cutout...

[FoMoCoSHO]

Just FYI guys they are definitely going to be around $900 + the $400 for the cutout and $115 for solenoid and Hobbs switch (to allow you to turn off the cutout if you want)
Are you all still interested?

Are you going to have the solenoid on the site or do I need to order elsewhere?

[EcoPowerParts]

I'll be able to carry everything at my site for you guys.

[Night Hawk]

  I'm selling two(2) SPT boost activated cutout valves for 400 plus shipping, one with an unused ypipe flange and hardware.  I only used them for 1/2 a season last year in good working order.  I also have a Airaid filter with filter cover in great condition and a tuner from LMS.  PM me for info.

[FracaSHO]

Just FYI guys they are definitely going to be around $900 + the $400 for the cutout and $115 for solenoid and Hobbs switch (to allow you to turn off the cutout if you want)
Are you all still interested?

What exactly will these parts replace?  For instance, I have PPE DP's and a Corsa exhaust, yet to be installed. If I were to get the cutout, would I still be able to use these parts? 


Brad
2010 SHO with PP
170* T-Stat
NGK LTR7IX plugs, gap at 0.030
BOV VTA
MyCal LMS Stage 4+
Sent from my iPhone

[SHOmanMike84]

Any updates on this? Still looking for a car?

[SRT82ECOBOOST]

Any updates on this? Still looking for a car?

Or just like most upgrdaes for these cars, a lot of ideas and promises of more new parts that never come to fruition.

[FoMoCoSHO]

Any updates on this? Still looking for a car?

Or just like most upgrdaes for these cars, a lot of ideas and promises of more new parts that never come to fruition.

Actually, this part exists last I heard Mike was waiting on test cars to make sure its good so he can send mine back.

He was also looking into an avenue to make it a bit cheaper as well.

[MDesign Performance]

Any updates on this? Still looking for a car?

Or just like most upgrdaes for these cars, a lot of ideas and promises of more new parts that never come to fruition.

Actually, this part exists last I heard Mile was waiting on test cars to make sure its good so he can send mine back.

He was also looking into an avenue to make it a bit cheaper as well.

Yea he sourced a more cost effective boost activated cut out that should turn into a nice discount for you guys, looks promising. As far as any other parts, I should be taking pre-orders for the intake in the next week or so.

[EcoPowerParts]

Sorry guys ALL of my time the last month + outside of my day job has been to do paperwork for the new building, setup all of the items and then start doing this:



We still have to finalize the dyno install, get power installed, paint, new walls and then build out the manufacturing areas.
After that I have a volunteer to come down to finalize the cutout, I could have done it earlier but then wouldn't have been able to make any so it would have been useless.
Give me 30-60 more days and I'll get the business up and running and we can get Jacob in or Tom or whoever locally to finish the fitment and then be able to make them in quantity.
I'll probably set up a pre-order scenario once we have costs figured of 5 at a time and make them in batches.
I apologize for the delay but the work that is going on will allow for a ton more parts to be made, all in house. I also have to review the possibility of new parts, intercoolers etc and how feasible they are for production - prototyping costs vs possible sales.