October 20, 2020, 09:42:12 AM
collapse
collapse

Author Topic:  HOW-TO: 2015 Explorer Diode Dynamics SS3 Pro Foglights Install  (Read 242 times)

Offline Ecoboost_xsport

  • 2015 Ford Explorer Sport
  • Full Member
  • *
  • Orangevale, CA
  • Thank You
  • -Given: 56
  • -Received: 68
  • Posts: 72
  • Mad Scientist
    • The Workshop
  • Liked:
  • Likes Given: 0
HOW-TO: 2015 Explorer Diode Dynamics SS3 Pro Foglights Install
« on: September 21, 2020, 03:03:22 PM »
Diode Dynamics SS3 Pro Foglights Install

I did this mod some time ago, but just now getting to do the write up for it.
So I always wanted to have better lighting on this vehicle and went to HIDs years ago.  Lately LED technology has been getting better so figured I'd try out what was on the market.  I wanted to stay away from cheap overseas kits found on places like eBay.  Did some research and learned about Diode Dynamics (https://www.diodedynamics.com/).  Stuff is either made or assembled here in good ol' US of A.
Anyway, started out looking for foglight upgrades and I liked what they were offering with their SS3 Pro kit (https://www.diodedynamics.com/stage-series-3-sae-dot-type-a-fog-light-kit.html).  It's SAE/DOT legal so that's cool as well.

The kit required some changes as it wasn't plug-and-play (even though it was supposed to be listed for my application).  They may now have what is needed though.

Finished installation:


The foglight bracket once removed:


LED housing installed into the bracket:


The issue came up when installing the housing into the foglight bracket, it wouldn't seat properly.  Here is how far the bracket is away from bolting up when the LED housing is installed:




There are 3 screws that hold the bracket in place.  Here is what it looks like behind the bumper without the bracket (I put my ball cap in the opening so the glare from the sun wouldn't wash out the pic, LOL):



And here's one of the holes on the bracket:


Had to get creative so I found some old hardware and spacers in my bucket-o-spare-hardware, LOL:


Don't ask me where that spacer came from, but they are about 1/2" long to fill in the space needed.  I had 6 of them, 3 for each side. Here is how it looks on the bracket:




And everything finally installed, now there is only a very small gap but I was okay with this:




Here is the look on and off:




I need to get some photos from the drivers viewpoint at night, but holy crap these things light up the road...WAY better than the stock fogs or the HIDs I had prior to these.  Now I just wish there was some high end LEDs for the headlights that fit into our housing (I've tried a few sets and most won't actually fit.
« Last Edit: October 03, 2020, 11:38:43 PM by Ecoboost_xsport »

Offline StealBlueSHO

  • Administrator
  • Elite Member
  • *
  • Thank You
  • -Given: 2885
  • -Received: 2828
  • Posts: 4050
  • I poke at BPD1151
  • Liked:
  • Likes Given: 51
Re: HOW-TO: Diode Dynamics SS3 Pro Foglights Install
« Reply #1 on: September 22, 2020, 09:41:00 PM »
Another fantastic write up! I need to find a clean way to put fog lights in the SHO. Thank you for supporting the forum and throwing out a couple really well done write ups.
2016 Taurus SHO Performance Pack, Gearhead Custom Tunes, Gearhead Gen3 Turbos, Gearhead Intercooler, Gearhead 170 Tstat, EPP Dual Feed Intake, EPP Hot Pipes, EPP Ceramic Coated Catted Downpipes, Corsa Exhaust, XDI-35 Fuel Pump, DW In-Tank Fuel Pump, Fuel-It Bluetooth Ethanol Analyzer, HR Lowering Springs, AD Lower Trans Mounts, 3Bar MAP, SP-542 Plugs, Custom SHO Puddle Lights, Custom Gearhead emblem overlays. Best time currently is 11.922 @ 115mph full weight, stock wheels, stock tires... just like it came off the show room floor.

Offline Macgyver

  • Super Moderator
  • Elite Member
  • *
  • *
  • Reading, Pa.......
  • Thank You
  • -Given: 100
  • -Received: 361
  • Posts: 827
  • Ecobooster
  • Liked:
  • Likes Given: 7
Re: HOW-TO: Diode Dynamics SS3 Pro Foglights Install
« Reply #2 on: September 23, 2020, 12:03:45 AM »
Super Great Job.

Its nice to have good mods for people to see first hand.

Offline Ecoboost_xsport

  • 2015 Ford Explorer Sport
  • Full Member
  • *
  • Orangevale, CA
  • Thank You
  • -Given: 56
  • -Received: 68
  • Posts: 72
  • Mad Scientist
    • The Workshop
  • Liked:
  • Likes Given: 0
Re: HOW-TO: 2015 Explorer Diode Dynamics SS3 Pro Foglights Install
« Reply #3 on: October 09, 2020, 12:29:06 AM »
So I finally got around to taking some comparison night shots.  I did not take any photos of the HID fogs, so this could arguably be an invalid comparison, but figured I'd show at least something.  I took four photos at each position.  In my attempt at making it equal and fair, I took each photo using my Samsung Galaxy S9+, mounted on a suction windshield mount.  All shots where made in Manual Mode:
  • F1.5
  • 1/10s shutter speed
  • 4.30mm focal length
  • ISO400
  • No Flash
Order of shots in each grouping from top to bottom:
  • Low Beam and Foglights
  • Low Beam
  • Low Beam and High Beam
  • Parking Lights
1st Grouping:


2nd Grouping:


And finally, a light output comparison video:
« Last Edit: October 09, 2020, 12:38:57 AM by Ecoboost_xsport »

 

* Recent Topics

Re: Can't find a couple of modules in Forscan
by Black Dream | October 19, 2020, 06:11:38 PM
So I learned a few things over the last week. Talked to AdmiralSparkle...
Re: Need to share with this group.
by bamsho | October 19, 2020, 01:16:22 PM
Im not running away from this, I feel better if it's out in the o...
Re: What have you done to your Ecoboosted vehicle today?
by bubbarotondo21 | October 19, 2020, 10:21:14 AM
Finally got my muffler delete done, still have stock resonator and cat...
Re: Random thoughts for the day
by MiWiAu | October 18, 2020, 02:00:41 PM
Hiya, folks! Just checking in!Got my winter wheels installed yesterday...
Re: SCT Livewire Killed PCM
by ridered74 | October 18, 2020, 01:06:30 PM
I've heard of several people having issues flashing vehicles for ...
Re: bpd1151's 2010 SHO Rebuild Thread....
by bpd1151 | October 17, 2020, 10:44:01 PM
PRICELESS!!Sent from my SM-N950U using Tapatalk...
Re: SBS 2016 Taurus SHO Build Thread
by StealBlueSho | October 17, 2020, 03:01:45 PM
Out with the AD front mount and in with the stock one.. Being as Iím t...
Re: Tail lights
by Nova | October 16, 2020, 09:43:25 PM
Know how FMC sources parts from their vendors....I will simply guess t...
Re: New member from Woodstock, Ontario
by Matt_Sommers | October 16, 2020, 07:36:42 PM
Hi everyone, my name is Matt Sommers and its great to finally join thi...
Re: More Fuel Delivery & Cooling Parts
by StealBlueSho | October 16, 2020, 10:27:48 AM
Thank you for the sale update! ...
Official Forum Sponsor of Ecoboost Performance Forum

SimplePortal 2.3.5 © 2008-2012, SimplePortal