Hey guys last weekend I had an issue with my 2010 SHO, its posted over on the SHO forum. Pulling up onto a highway the car seemed to just cutout. Ended up limping it 20 miles home st about 45ish. Idle was really rough and as i was testing at home I started getting white smoke out the exhaust.
Thought I lost a couple coils I had a misfire I diagnosed to 5/6 cylinders.
Upon replacing the coils i found the #6 plug was covered in oil not unburnt gas. Realized the cylinder has half a cup of fluid.
Couldn't find any oil in coolant or vice versa. After discussions and a lot of thinking i got something to pull some of the fluid out and there was coolant in the oil. So head gasket replacement is coming up next week.
For now I am just going to throw a bandaid on and get all the seals and gaskets replaced ill be messing with. Im gonna pray all my timing parts are still good im at 117k, will replace the water pump, and then drain the fluids and replace.
Does anyone know if the head gaskets are the same between EB/NA blocks? They appear to all be the same