• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

First dyno for the sleeper sedan

Started by WinPlaceSHO, April 13, 2020, 11:01:58 AM

Previous topic - Next topic

SHOdded

#15
1:1 is the last gear before overdrive, 5th in this case. 

http://www.nicksmustangranch.com/Service_Manuals/2014/2014_Taurus/Service%20Manual.htm

Gear Ratio Chart

Gear   Ratio
1st/low   4.484:1
2nd   2.872:1
3rd   1.842:1
4th   1.414:1
5th   1:1
6th   0.742:1
Reverse   2.882:1
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

76fomoco

almost the same mods as you with AJP E30 on stock hpfp and stock IC I put 415hp and 470 tq on a mustang dyno and the car run 12.5 with 3500 DA at 70 * you can adjust about .1 per 1000' of DA
2013 PP AJP E30 160 TS, sp542 plugs, 3 bar, PPE catted DP's, GH IC, GH turbos, XDI-35, EPP hot and intake
Best 3-29-21  11.85 with 3000 DA
DA trap best 117.96
E30 = 492 whp, 536 wtq
E30+meth 498 whp, 539 wtq