February 27, 2020, 08:04:22 PM
collapse
collapse

Author Topic: Blower motor removal?  (Read 2823 times)

Offline Gjkrisa

  • Elite Member
  • : Fairbanks, AK
  • Thank You
  • -Given: 944
  • -Received: 208
  • Posts: 829
  • Ecobooster
    • Photos
Blower motor removal?
« on: January 20, 2020, 05:38:07 PM »
Hi so I took the car to the car wash where it's very humid I had turned on the AC to keep the windows from fogging but then the next day my blower motor was frozen from moving.
Put a heater on it then it started working again about three hours later  when it's -30f. Next day it froze again after getting it very hot for an hour.

So I'm curious how do I get to the blower motor so I can wipe out the moisture.

Sent from my Pixel 4 XL using Tapatalk

2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

Offline SHOdded

  • Administrator
  • Elite Member
  • : Beltsville, MD
  • Thank You
  • -Given: 12530
  • -Received: 4118
  • Posts: 15766
Re: Blower motor removal?
« Reply #1 on: January 20, 2020, 07:55:57 PM »
If it is anything  like the Edge, you drop the glovebox to get at it from underneath.  Look up the MACTFORDEDGE  channel on youtube.

https://youtu.be/UmlmDJf6xw8
http://www.nicksmustangranch.com/Service_Manuals/2014/2014_Taurus/Service%20Manual.htm

Procedure:
« Last Edit: January 21, 2020, 09:58:54 AM by SHOdded »
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Offline Gjkrisa

  • Elite Member
  • : Fairbanks, AK
  • Thank You
  • -Given: 944
  • -Received: 208
  • Posts: 829
  • Ecobooster
    • Photos
Re: Blower motor removal?
« Reply #2 on: January 21, 2020, 09:36:50 AM »
I hope it's that easy going to attempt it on lunch

Sent from my Pixel 4 XL using Tapatalk

2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

Offline SHOdded

  • Administrator
  • Elite Member
  • : Beltsville, MD
  • Thank You
  • -Given: 12530
  • -Received: 4118
  • Posts: 15766
Re: Blower motor removal?
« Reply #3 on: January 21, 2020, 09:59:22 AM »
Should be.  Updated post above.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Offline Gjkrisa

  • Elite Member
  • : Fairbanks, AK
  • Thank You
  • -Given: 944
  • -Received: 208
  • Posts: 829
  • Ecobooster
    • Photos
Re: Blower motor removal?
« Reply #4 on: January 21, 2020, 03:08:29 PM »
Thank you I didn't check back before doing but I'd like to add that the rear left screw is reverse thread I tried for a few minutes the right way notice it didn't even budge tried the other way and it came loose
Here are the photos of the motor.
I had a heater on it the area was very warm w/ also auto started it for 30 minutes not sure if all that dried the water out but it was completely dry just can see the red soap or wax dried on there.
I left the panel off so if I need to replace it or give it a gentle kick to turn it back on it should be much easier.
The motor turned freely.
Sent from my Pixel 4 XL using Tapatalk

You will need a 7mm and 8mm 7 first 3 then 8 for the motor.
« Last Edit: January 22, 2020, 06:22:58 PM by Gjkrisa »
2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

Offline SHOdded

  • Administrator
  • Elite Member
  • : Beltsville, MD
  • Thank You
  • -Given: 12530
  • -Received: 4118
  • Posts: 15766
Re: Blower motor removal?
« Reply #5 on: January 21, 2020, 06:57:53 PM »
I would have sprayed liberally with electronics parts cleaner to get it cleaned out, but not sure if it has exposed greaseable parts or not.

Fingers crossed, it's back in business.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Offline Gjkrisa

  • Elite Member
  • : Fairbanks, AK
  • Thank You
  • -Given: 944
  • -Received: 208
  • Posts: 829
  • Ecobooster
    • Photos
Re: Blower motor removal?
« Reply #6 on: January 21, 2020, 07:02:57 PM »
I would have sprayed liberally with electronics parts cleaner to get it cleaned out, but not sure if it has exposed greaseable parts or not.

Fingers crossed, it's back in business.
Yea didn't think about that I really want to.

Sent from my Pixel 4 XL using Tapatalk

2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • : New York SHO
  • Thank You
  • -Given: 1838
  • -Received: 3896
  • Posts: 1908
  • Trap Speed of almost 116 mph.
Re: Blower motor removal?
« Reply #7 on: January 22, 2020, 04:53:52 AM »
It might be worth to also check the Blower Control Module Resistor if its not functional!  [9L3Z19E624B].They work in accordance to each other.

Btw check the cabin air filter to verify it's not wet. Z

https://www.fordpartsgiant.com/parts/ford-control_9l3z-19e624-b.html?Vin=1FAHP2KT5DG183206&Filter=()
« Last Edit: January 22, 2020, 03:37:52 PM by ZSHO »

                  

2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline Gjkrisa

  • Elite Member
  • : Fairbanks, AK
  • Thank You
  • -Given: 944
  • -Received: 208
  • Posts: 829
  • Ecobooster
    • Photos
Re: Blower motor removal?
« Reply #8 on: January 22, 2020, 09:36:23 AM »
It might be worth to also check the Blower Control Module Resistor if its not functional!  [9L3Z19E624B].They work in accordance to each other.

Btw check the cabin filter to verify it's not wet. Z

https://www.fordpartsgiant.com/parts/ford-control_9l3z-19e624-b.html?Vin=1FAHP2KT5DG183206&Filter=()
Oh man your correct I should have first checked the cabin filter the first time it froze
Well it worked this morning.
I'll check the filter at lunch.

Sent from my Pixel 4 XL using Tapatalk

2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

Offline Gjkrisa

  • Elite Member
  • : Fairbanks, AK
  • Thank You
  • -Given: 944
  • -Received: 208
  • Posts: 829
  • Ecobooster
    • Photos
Re: Blower motor removal?
« Reply #9 on: January 22, 2020, 02:49:53 PM »
Well the filter had no signs of water in it completely dry
Does any one know of an easier was to get the filter cover off the left one has to many sharp edges in the area.
Maybe just use mechanic gloves.
Sent from my Pixel 4 XL using Tapatalk
2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • : New York SHO
  • Thank You
  • -Given: 1838
  • -Received: 3896
  • Posts: 1908
  • Trap Speed of almost 116 mph.
Re: Blower motor removal?
« Reply #10 on: January 22, 2020, 03:17:11 PM »
Well the filter had no signs of water in it completely dry
Does any one know of an easier was to get the filter cover off the left one has to many sharp edges in the area.
Maybe just use mechanic gloves.
Sent from my Pixel 4 XL using Tapatalk
Grab a pair of needle nose pliers and pull the bottom TAB UP and should pop off.

Alternative is using a mini flat head screw driver and insert it behind the TAB and PULL IT UP & outwards. Z

« Last Edit: January 22, 2020, 04:20:36 PM by ZSHO »

                  

2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline Gjkrisa

  • Elite Member
  • : Fairbanks, AK
  • Thank You
  • -Given: 944
  • -Received: 208
  • Posts: 829
  • Ecobooster
    • Photos
Re: Blower motor removal?
« Reply #11 on: February 05, 2020, 08:12:30 PM »
Ok now the blend door isn't operating I thought that was frozen but won't work still when I had heat in the car for 8 hrs same as before

It did kinda show signs of going out I was messing with forscan and in the error codes said the motor circuit was closed but then restarted the car and everything was fine...

So I know I have seen at least one post on this but how would I diagnosis this issue or do is there one main motor to replace for the blend doors?
Right now I believe it's just stuck on panel mode.

Sent from my Pixel 4 XL using Tapatalk

2016 Taurus SHO pp Shadow Black
diy emblems,jms boost max, FORscan modder

Offline SHOdded

  • Administrator
  • Elite Member
  • : Beltsville, MD
  • Thank You
  • -Given: 12530
  • -Received: 4118
  • Posts: 15766
Re: Blower motor removal?
« Reply #12 on: February 05, 2020, 11:05:01 PM »
http://www.nicksmustangranch.com/Service_Manuals/2014/2014_Taurus/Resources/Service_Manual/sefc1024.htm

If it is stuck as to where the air is directed, that is a mode door actuator issue.  There is one mode door actuator for defrost/panel/floor as linked to above.
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

 

* Featured Topics

* Recent Topics

Re: Misfiring codes P0300, P0302 and P0306
by ddlopes | Today at 08:03:16 PM
Awesome!Thank you! Iím so glad it wasnít a fuel injector issue. That w...
Meth nozzle not flush
by ChrisxHowe | Today at 03:06:59 PM
Before I get this bung welded on my hot pipes I test fitted the nozzle...
Re: What have you done to your Ecoboosted vehicle today?
by SuperPete | Today at 06:11:24 AM
We will find out, please keep up posted, lots of pic's.....
Re: PTP Turbo blanket update for the SHO
by 802SHO | February 26, 2020, 06:25:07 PM
For those waiting on an update of the PTP turbo blankets they are read...
Re: Suggestions where to buy PPE catted DPs
by 10ECOMKS | February 26, 2020, 05:29:52 PM
I just bought a pair of Catted PPE DP's from Vivid Racing for ano...
Re: Battery charge?
by Gjkrisa | February 26, 2020, 08:46:26 AM
I remember seeing something on the cables that looked like a permanent...
Re: SuperPete SHO Build record
by SuperPete | February 25, 2020, 09:19:48 PM
Another video,1/4 mile Dragy showed 12.4 seconds, need to shave anothe...
Re: bpd1151's 2010 SHO Rebuild Thread....
by bamsho | February 25, 2020, 06:03:27 PM
That's a pretty box, glad I know what's in it, hehe...
Re: 2014 Lincoln MKS EcoBoost with all the goodies $12,900.
by SHOdded | February 25, 2020, 04:38:20 PM
Well, at least you get to move forward!  Good luck with your new ...
Re: Note to self-beware of Tesla
by sm105k | February 25, 2020, 07:03:56 AM
Yep I only have one L in the street light to street light Grand Prix s...
Re: Wrapping intake pipe, numbers are out<<<
by Davidsiebert2 | February 25, 2020, 06:15:54 AM
@SuperPete Thatís because the wrap you used doesnít do much for a radi...
Re: Xdi hpfp
by ChrisxHowe | February 25, 2020, 02:36:03 AM
https://m.facebook.com/groups/823281341395712?view=permalink&id=12...
Are You Organizing a Car Show or Other Auto Related Event?
by RockAuto | February 24, 2020, 12:33:40 PM
RockAuto would love to work with your upcoming car show, cruise-in, sw...
Re: PTU, what's inside and why my 26K mi put took a dump
by SHOdded | February 24, 2020, 12:24:17 PM
the dealer will send you the latest revision even if not so listed on ...
Re: Mustang 5.0
by SHOdded | February 23, 2020, 02:02:09 PM
Hope the dentist is a good one!...

Back to top