Aftermarket sway bars!

bpd1151 · February 06, 2020, 04:36:13 PM

Sharp. Great update. Thank you.

Look'n forward to its completion.

Sent from my SM-N950U using Tapatalk

Moisme33 · February 06, 2020, 06:31:06 PM

Definitely interested in this setup!

Eliuprt · February 06, 2020, 10:36:31 PM

reply to the people asking about if the car got lowered. The links just need to be adjusted longer to accommodate a lowered car, that`s it

802SHO · February 07, 2020, 06:41:14 AM

Me want

Eliuprt · February 28, 2020, 08:59:12 PM

Last update from Mitchell. They make 3-rd prototype to clear
Hey all once again. Sorry for so many updates. But I believe we are all good with the rear sway bar. I test fitted the new bend design and it looks like we are all clear. Its clearing the control very well. After test driving. I did not notice any knocking like I did before on big dips and bumps and inclines on driveways. However, this was on a bone stock SHO suspension wise. I can't be 100% certain on a lowered SHO. However, it should clear still. I can cross that bridge when It comes.

That being said here are the photos of the bars. I am relaying all the fitment data to my team and we can hopefully have bars ready to come over here by The middle of April. I know its a long wait but it should be worth it.

Thank you, everyone.

P.S. I think they will offer sway separately and sway + endlinks if needed.

802SHO · February 29, 2020, 09:58:46 AM

Quote from: Eliuprt on February 28, 2020, 08:59:12 PM
Last update from Mitchell. They make 3-rd prototype to clear
Hey all once again. Sorry for so many updates. But I believe we are all good with the rear sway bar. I test fitted the new bend design and it looks like we are all clear. Its clearing the control very well. After test driving. I did not notice any knocking like I did before on big dips and bumps and inclines on driveways. However, this was on a bone stock SHO suspension wise. I can't be 100% certain on a lowered SHO. However, it should clear still. I can cross that bridge when It comes.

That being said here are the photos of the bars. I am relaying all the fitment data to my team and we can hopefully have bars ready to come over here by The middle of April. I know its a long wait but it should be worth it.

Thank you, everyone.

P.S. I think they will offer sway separately and sway + endlinks if needed.

Send me a set, I'll verify they clear a lowered SHO...better yet...a lowered SHO with cut lowering springs....then you'll know they'll clear anyone's ride!

wraitherx · May 12, 2020, 10:21:54 PM

Anyone know what the final outcome of this is?

Sent from my iPhone using Tapatalk

FiveLeeter918 · May 12, 2020, 10:40:27 PM

Well Mitchell was released from the company when they shut down for COVID. I've been I'm contact with another sales rep who says they will still be produced, but are delayed due to COVID. He said the work order has been created and they will have a bulk buy that I'll be hosting. I actually need to follow up on this, will report back when I have more details.

bpd1151 · May 12, 2020, 10:42:59 PM

My build has been slowed down as a result of the COVID-19 pandemic, and all of the resulting shut down orders.

So I completely get it.

Thanks for the update. Still interested.

Sent from my SM-N950U using Tapatalk

wraitherx · May 13, 2020, 09:12:16 AM

Understandable and thanks for the update! I'm interested as well!

Sent from my iPhone using Tapatalk

SM105K · May 13, 2020, 10:55:04 AM

Interested as well. I can turn and burn a trip for fitment as well. I can be in Ontario in about 4.5 hours. I am sitting on cut H&R's as well.

Dxlnt1 · May 13, 2020, 07:00:12 PM

Quote from: Eliuprt on January 30, 2020, 08:28:40 PM
hello. i`m the guy who start all this with Whiteline. Lil update:

Mitchel Yardley (https://www.facebook.com/71Yardley3) needs test SHO to check our 24 mm 2 point sway bar fitment. Located in SoCal. Ontario.
when Mitchell gets his test vehicle in he will make measurements and then Whiteline should be able to offer set of universal adjustable links.
So we need test SHO asap

Im just seeing this but could've helped out. I am roughly 30-45 minutes aways from Ontario. If you still need protype car to test firment lemme know!

avidmotion · May 19, 2020, 06:55:37 AM

sub

FiveLeeter918 · June 26, 2020, 08:49:27 PM

still waiting on a manufacturing update unfortunately

xartic1 · August 01, 2020, 11:18:02 AM

I have an Explorer Sport and I just came across this thread. I have done some cross referencing of the Explorer's rear sway bar and the Taurus and it looks like the parts are cross compatible with one another (Sport and SHO) according to FordPartsGiant.

Has anyone looked into getting the Explorer's Steeda rear sway bar to see if it would work?