• Welcome to Ecoboost Performance Forum. Please log in or sign up.
collapse

PPE Downpipes install question

Started by SuperPete, December 04, 2019, 09:49:18 AM

Previous topic - Next topic

SuperPete

Got my downpipes today, WOW do they look sexy or what, perfection...
No words to describe, excellence at it's beset.
Planing on install this weekend, now the question is:
I only got two gaskets with them, for the connection to the exhaust, what about gaskets for the connection to turbo side? no gaskets?
Also longer pipe comes in two sections and I got no clamp for that, did they missed the clamp and gaskets or it's something I am responsible for.

thank you all
2014 SHO, GearHead TUNNED /Powered by Matt Robinson
PPE Downpipes, GearHead Intercooler, AirAid Intake
XDI-35 HPFP @ E40,   MSD Coilpacks
MUSTANG DYNO: 426/446
Continental Extreme Contact 06 & Powerstop Z23 all 4 corners

SHOdded

Some gaskets are reusable, but they may have missed something anyway.

Can you post pics of what you have received?
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Jordan

They don't give the turbo to downpipe gaskets on purchase. Some say they are reusable however I would recommend buying new motorcraft gaskets.
World's Fastest SHO Ecoboost July 2019 - Current

2020 Power Numbers - 536AWHP/647Torque

SM105K

Quote from: Jordan on December 04, 2019, 12:43:46 PM
They don't give the turbo to downpipe gaskets on purchase. Some say they are reusable however I would recommend buying new motorcraft gaskets.

100 percent.  I used all new gaskets.  They are dirt cheap so yeah.
"M" 2013 SHO PP | AJPTurbo E30 Tune | FS HPFP | Stock IC with Ice Water DIY Sprayer | PPE Downpipes | Custom Magnaflow Resonator | 3rd Cat Delete | Derale Upgraded Trans Cooler | Dicunzolo Gen2 Trans Mounts| EPP Noisemaker Eliminator | MSD Coil Over Plugs | SP-542's | UPR Dual Valve Catch Can | K&N Drop In | Power Stop Slotted and Drilled Rotors with Stock PP Pads | H&R Springs  | AVS Flush Deflector | 802SHO Custom Splitter | Duraflex Chin Spoiler | Curva Concept C7's | Continental DWS06 Extreme Contact Rubber | 411 HP and 546 TQ |

"The Fukus" 2013 Focus ST | Boomba BOV | FSWerks Short Shifter | Power Stop Brakes | Continental DWS06 Extreme Contact Rubber |

StinkinLinkin13

Sound's like you are missing a clamp however. They are pretty cheap and easy to find though. NAPA or other auto parts stores/exhaust shop.
Livernois Catless downpipes with Totalflow mufflers - AJP E40/Meth tune - Firestorm HPFP - DW 300 LPFP - Kenne Bell Boost-a-Pump - 3 Bar Map - Alky Controls Meth Injection - 160° Thermostat - EPP Hot Pipes - AEM Dryflow Filter - BOV VTA - SSM Polyurethane Torque Struts - H&R Sport Springs - 20"x10" Niche Veronas on 275/40-20 DWS06 -

ZSHO

#5
Hmm interesting! Where did you purchase the DP from! Non catted version!
NO Gaskets with mine. Bolts & nuts for Flange to exhaust only...
The Motorcraft Gaskets are for one-time use only IIRC! Z

Converter Gasket - Ford (AA5Z-6L612-A)

https://parts.levittownfordparts.com/oem-parts/ford-converter-gasket-aa5z6l612a?c=bT0xJmw9MSZuPVJlY29tbWVuZGVkIFByb2R1Y3RzJms9MQ%3D%3D

Front Pipe Bolt - Ford (-W714826-S900)

https://parts.levittownfordparts.com/oem-parts/ford-front-pipe-bolt-w714826s900


2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

SuperPete

Picture attached of what I got with the pipes.
Got them from jmautoracing.com, they whereon sale for $830 for catted version, I jumped on it like it was hot, that was 6 weeks ago, thats how much it took for PPE to make and ship, got pipes directly from PPE

2014 SHO, GearHead TUNNED /Powered by Matt Robinson
PPE Downpipes, GearHead Intercooler, AirAid Intake
XDI-35 HPFP @ E40,   MSD Coilpacks
MUSTANG DYNO: 426/446
Continental Extreme Contact 06 & Powerstop Z23 all 4 corners

76fomoco

always 4-6 weeks out to get pipes from them. I would spray the turbo side studs with liquid wrench about 30 min before taking off the stockers. then I would put anti seize on the 6 studs at the turbo and the 4 bolts at the flanges at the rear.
They are soooooo beautiful for sure! 
2013 PP AJP E30 160 TS, sp542 plugs, 3 bar, PPE catted DP's, GH IC, GH turbos, XDI-35, EPP hot and intake
Best 3-29-21  11.85 with 3000 DA
DA trap best 117.96
E30 = 492 whp, 536 wtq
E30+meth 498 whp, 539 wtq