July 04, 2020, 04:26:42 PM
collapse
collapse

Author Topic: Splitter  (Read 39464 times)

Offline 802SHO

  • Elite Member
  • *
  • Essex Junction Vermont
  • Thank You
  • -Given: 2177
  • -Received: 1047
  • Posts: 1356
  • Boosted
Splitter
« on: August 12, 2019, 07:56:32 AM »
As many of you know the options for exterior styling are limited for our platform.  For the most part all we can do there is tint, black out chrome, debadge, add badges, lower the suspension and add a nice set of wheels.  There is a rear window spoiler to buy and a front chin spoiler.

Watching other vehicles enhance their appearance with exterior styling modifications available to them makes me feel left out.  We really get the short end of the stick with this platform.  It's such a good sleeper the vast majority of the aftermarket world didn't take notice, with the exception of just a few. 

I like the way splitters look and enhance the appearance of mustang, cameros, corvettes, caddilacs...etc.  So I looked around and searched out universal ones but nothing was wide enough for our massive front ends.  I decided to make my own.

It's constructed of 1/4" ABS plastic (rigid and durable) and I covered the cut edge with 1/4" Trim Lok.  It's fastened to my Extreme Dimensions front chin spoiler with 10 stainless steel bolts, lock washers, washers and nuts.  For the splitter rods I went with Full Torque Racing (FTR) rods for their quality and to stiffen up this splitter under downforce.  Even with this splitter not replacing the splash guard it certainly works.  I can tell its much more stable at high speeds than ever before. 

Some of you have expressed interest in this splitter for your own rides.  I'm interested to see if any others would also be interested.  I also will start making one that will fit the SHO's that do NOT have the Extreme Dimensions front chin spoiler. 

Currently I am going to have my splitter dimensions cleaned up and cut with a laser jet.  If I'm going to send you guys a splitter it's going to have to be quality craftsmanship.  I'm also going to look into cleaning the edge with an edge router so that its optional if you want the Trim Lok.  A splitter would come to you with all fasteners, Trim Lok if you want it and the FTR splitter rods. 

This does require drilling into your lower grille and removing the front bumper is a must to do that and secure the splitter rod. 

Thank you for your interest.  Stay tuned for updates.
2010 SHO non PP, Tuned by AJP Turbo, Ported GH upgraded turbos, Ported 13+ Exhaust Manifolds, GH upgraded IC, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, Derale 10000 series 16 row trans cooler, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, Aeroforce Interceptor Gauge.
Highest Trap Speed 123.22 mph
PB 11.368 @ 122.68 NED 10/20/19

Offline SHOdded

  • Forum Supporters
  • Elite Member
  • *
  • Beltsville, MD
  • Thank You
  • -Given: 13013
  • -Received: 4215
  • Posts: 15887
Re: Splitter
« Reply #1 on: August 12, 2019, 08:11:59 AM »
Exciting!!!
2007 Ford Edge SEL, Powerstop F/R Brake Kit, TXT LED 6000K Lo & Hi Beams, W16W LED Reverse Bulbs, 3BSpec 2.5w Map Lights, 5W Cree rear dome lights, 5W Cree cargo light, DTBL LED Taillights

If tuned:  Take note of the strategy code as you return to stock (including 3 bar MAP to 2 bar MAP) -> take car in & get it serviced -> check strategy code when you get car back -> have tuner update your tune if the strategy code has changed -> reload tune -> ENJOY!

Offline bpd1151

  • Forum Supporters
  • Elite Member
  • *
  • *
  • SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2427
  • -Received: 2475
  • Posts: 3684
  • SHOGAZM
Re: Splitter
« Reply #2 on: August 12, 2019, 08:44:02 AM »
Me likely, me wanty.

Let the community know when deposits will be accepted, and more importantly, how production progresses.

Thank you for stepping forward and taking up the reigns on this.



Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO (Nov. 2015 to July 2019) Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline shoNoff

  • Elite Member
  • *
  • NH
  • Thank You
  • -Given: 216
  • -Received: 652
  • Posts: 715
  • Shomu the killer whale
Re: Splitter
« Reply #3 on: August 12, 2019, 09:49:40 AM »
Hell yea Andrew. What a way to step up and help the community. All I can say is Ive seen this car in person recently. The splitter looks amazing. Pictures do not do it justice. If I still had my sho Id already be in line.
2013 SHO PP 12.51 @ 110.07 AJP tuned sold
2016 edge sport 13.92 @ 99.4 mph. slow and stock baby mobile

Offline SM105K

  • IG @egocheckersho
  • Forum Supporters
  • Elite Member
  • *
  • *
  • Arizona
  • Thank You
  • -Given: 929
  • -Received: 1091
  • Posts: 1223
  • Thee Forum Cowboy
Re: Splitter
« Reply #4 on: August 12, 2019, 10:44:44 AM »
For more info.....

https://www.extremedimensions.com/10-12-Taurus-Racer-FL.html

However, I found this same one cheaper with wikibuy on ebay.

https://www.ebay.com/itm/Ford-Taurus-10-12-Front-Bumper-Lip-Under-Air-Dam-Spoiler-Racer-Style-/312124251833

That is the front chin spoiler that Andrew has. I am picking one up as I write this.
« Last Edit: August 12, 2019, 12:21:53 PM by SM105K »
"M" 2013 SHO PP | AJPTurbo E30 Tune | GH Intercooler | PPE Downpipes | Custom Magnaflow Resonator | 3rd Cat Delete | Dicunzolo Gen2 Trans Mounts| EPP Noisemaker Eliminator | MSD Coil Over Plugs | SP-542's | UPR Dual Valve Catch Can | K&N Drop In | Power Stop Slotted and Drilled Rotors with Stock PP Pads | H&R Springs  | Curva Concept C7's | Continental DWS06 Extreme Contact Rubber |

"The Fukus" 2013 Focus ST | AJPTurbo Flex Fuel Tune | Megan Racing Catless Downpipe | Boomba BOV | FSWerks Short Shifter | Power Stop Brakes | Continental DWS06 Extreme Contact Rubber |

Offline Nova

  • Full Member
  • *
  • Thank You
  • -Given: 61
  • -Received: 77
  • Posts: 57
  • Ecobooster
Re: Splitter
« Reply #5 on: August 12, 2019, 12:09:01 PM »
For more info.....

https://www.extremedimensions.com/10-12-Taurus-Racer-FL.html

That is the front chin spoiler that Andrew has. I am picking one up as I write this.
It says it fits 10-12...do you know if it would fit my 18? Cuz I would love to have that custom splitter that 802 is trying to make.

Sent from my SM-G965U using Tapatalk


Offline SM105K

  • IG @egocheckersho
  • Forum Supporters
  • Elite Member
  • *
  • *
  • Arizona
  • Thank You
  • -Given: 929
  • -Received: 1091
  • Posts: 1223
  • Thee Forum Cowboy
Re: Splitter
« Reply #6 on: August 12, 2019, 12:22:59 PM »
For more info.....

https://www.extremedimensions.com/10-12-Taurus-Racer-FL.html

That is the front chin spoiler that Andrew has. I am picking one up as I write this.
It says it fits 10-12...do you know if it would fit my 18? Cuz I would love to have that custom splitter that 802 is trying to make.

Sent from my SM-G965U using Tapatalk

It will fit.  Another member on SHO forum used it on his 13.  13-19 there is no difference.
« Last Edit: August 12, 2019, 12:39:46 PM by SM105K »
"M" 2013 SHO PP | AJPTurbo E30 Tune | GH Intercooler | PPE Downpipes | Custom Magnaflow Resonator | 3rd Cat Delete | Dicunzolo Gen2 Trans Mounts| EPP Noisemaker Eliminator | MSD Coil Over Plugs | SP-542's | UPR Dual Valve Catch Can | K&N Drop In | Power Stop Slotted and Drilled Rotors with Stock PP Pads | H&R Springs  | Curva Concept C7's | Continental DWS06 Extreme Contact Rubber |

"The Fukus" 2013 Focus ST | AJPTurbo Flex Fuel Tune | Megan Racing Catless Downpipe | Boomba BOV | FSWerks Short Shifter | Power Stop Brakes | Continental DWS06 Extreme Contact Rubber |

Offline Nova

  • Full Member
  • *
  • Thank You
  • -Given: 61
  • -Received: 77
  • Posts: 57
  • Ecobooster
Re: Splitter
« Reply #7 on: August 12, 2019, 12:24:08 PM »
Sweet! Thank you!!

Sent from my SM-G965U using Tapatalk


Offline 802SHO

  • Elite Member
  • *
  • Essex Junction Vermont
  • Thank You
  • -Given: 2177
  • -Received: 1047
  • Posts: 1356
  • Boosted
Re: Splitter
« Reply #8 on: August 12, 2019, 12:35:50 PM »
Easton is correct the front chin spoiler will fit 2010 to current.

I'm really honored you guys love the look!  I dont know how well this will look without the front chin spoiler but we'll find out. 
2010 SHO non PP, Tuned by AJP Turbo, Ported GH upgraded turbos, Ported 13+ Exhaust Manifolds, GH upgraded IC, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, Derale 10000 series 16 row trans cooler, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, Aeroforce Interceptor Gauge.
Highest Trap Speed 123.22 mph
PB 11.368 @ 122.68 NED 10/20/19

Offline FearlessAZ

  • Just Another Dirty Desert MKS
  • Sr. Member
  • *
  • Phoenix
  • Thank You
  • -Given: 585
  • -Received: 141
  • Posts: 394
Re: Splitter
« Reply #9 on: August 12, 2019, 01:47:03 PM »
I totally want to see what it looks like on an MKS
2010 Non PP Sho. All the factory goodies. (RIP)


2015 MKS Ecoboost. All the factory goodies.

Offline 802SHO

  • Elite Member
  • *
  • Essex Junction Vermont
  • Thank You
  • -Given: 2177
  • -Received: 1047
  • Posts: 1356
  • Boosted
Re: Splitter
« Reply #10 on: August 12, 2019, 02:33:14 PM »
I totally want to see what it looks like on an MKS

I agree.  Wouldn't that be something if we all had the same lower cladding.....then the mks could get the chin spoiler and the splitter.  Clearly no one has tried to mount the chin spoiler to an MKS. 
2010 SHO non PP, Tuned by AJP Turbo, Ported GH upgraded turbos, Ported 13+ Exhaust Manifolds, GH upgraded IC, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, Derale 10000 series 16 row trans cooler, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, Aeroforce Interceptor Gauge.
Highest Trap Speed 123.22 mph
PB 11.368 @ 122.68 NED 10/20/19

Offline SM105K

  • IG @egocheckersho
  • Forum Supporters
  • Elite Member
  • *
  • *
  • Arizona
  • Thank You
  • -Given: 929
  • -Received: 1091
  • Posts: 1223
  • Thee Forum Cowboy
Re: Splitter
« Reply #11 on: August 12, 2019, 03:28:02 PM »
I totally want to see what it looks like on an MKS

I agree.  Wouldn't that be something if we all had the same lower cladding.....then the mks could get the chin spoiler and the splitter.  Clearly no one has tried to mount the chin spoiler to an MKS.

I bet that chin spoiler will fit a MKS.  The bottom of the MKS and SHO look about the same.
« Last Edit: August 12, 2019, 03:31:17 PM by SM105K »
"M" 2013 SHO PP | AJPTurbo E30 Tune | GH Intercooler | PPE Downpipes | Custom Magnaflow Resonator | 3rd Cat Delete | Dicunzolo Gen2 Trans Mounts| EPP Noisemaker Eliminator | MSD Coil Over Plugs | SP-542's | UPR Dual Valve Catch Can | K&N Drop In | Power Stop Slotted and Drilled Rotors with Stock PP Pads | H&R Springs  | Curva Concept C7's | Continental DWS06 Extreme Contact Rubber |

"The Fukus" 2013 Focus ST | AJPTurbo Flex Fuel Tune | Megan Racing Catless Downpipe | Boomba BOV | FSWerks Short Shifter | Power Stop Brakes | Continental DWS06 Extreme Contact Rubber |

Offline 802SHO

  • Elite Member
  • *
  • Essex Junction Vermont
  • Thank You
  • -Given: 2177
  • -Received: 1047
  • Posts: 1356
  • Boosted
Re: Splitter
« Reply #12 on: August 13, 2019, 01:46:17 PM »
Currently the splitter to fit all extreme dimension front chin spoilers is being transfered to a CAD drawing.  I have consulted a couple different companies to use this drawing to precision cut the splitter out of ABS plastic sheets. 

I'll have one prototype sent to me and installed on my car to verify the quality.  So long as it checks out these will be ready for shipment in no time. 

I will share more information as I acquire it.
2010 SHO non PP, Tuned by AJP Turbo, Ported GH upgraded turbos, Ported 13+ Exhaust Manifolds, GH upgraded IC, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, Derale 10000 series 16 row trans cooler, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, Aeroforce Interceptor Gauge.
Highest Trap Speed 123.22 mph
PB 11.368 @ 122.68 NED 10/20/19

Offline fordfanstan

  • Jr. Member
  • *
  • Thank You
  • -Given: 39
  • -Received: 10
  • Posts: 12
  • Ecobooster
Re: Splitter
« Reply #13 on: August 13, 2019, 04:36:24 PM »
@802SHO did you have your front grilles painted? And the DRL plastic inserts?

Offline 802SHO

  • Elite Member
  • *
  • Essex Junction Vermont
  • Thank You
  • -Given: 2177
  • -Received: 1047
  • Posts: 1356
  • Boosted
Re: Splitter
« Reply #14 on: August 13, 2019, 04:45:17 PM »
@802SHO did you have your front grilles painted? And the DRL plastic inserts?

Yes my front grille and plastic drl inserts are tuxedo black
2010 SHO non PP, Tuned by AJP Turbo, Ported GH upgraded turbos, Ported 13+ Exhaust Manifolds, GH upgraded IC, EPP Hot Pipes, EPP Dual CAI, XDI35 HPFP, Deatschwerks LPFP, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous, Dicunzolo Gen2 torque mounts, MSD Coils, SP542 .026, 160 T, 3bar, Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, Derale 10000 series 16 row trans cooler, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, Aeroforce Interceptor Gauge.
Highest Trap Speed 123.22 mph
PB 11.368 @ 122.68 NED 10/20/19

 

* Recent Topics

Re: New Moderator
by sm105k | Today at 02:31:56 PM
Congrats E!  I have not been active much but Great to see others ...
Re: New member Omaha, Nebraska
by FearlessAZ | Today at 04:50:17 AM
Welcome to the forum!Love that color. Was that a factory color or some...
Re: Finally bought an XDI35 HPFP
by bamsho | July 03, 2020, 10:42:00 PM
Here is a comparison slips.  There is an 20 degree ambient temp d...
Re: Ride of The Month - July 2020!!
by Dannymack | July 03, 2020, 06:29:59 PM
Going for round #2.2013 MKSAJP E30Godspeed SpringsBunch of Aesthetic M...
Forum Stickers
by StealBlueSho | July 02, 2020, 01:47:07 PM
EBPF Family..Anyone have any recommendations on who to go through for ...
Re: B1086- Air Distribution Damper Motor - Panel/floor/defrost not working
by Gjkrisa | July 02, 2020, 01:19:45 PM
New panel worked think I cracked part of the new facia trying to take ...
Re: DannyMack 13 MKS "Old Man" Build and Maintenance Thread
by Dannymack | July 02, 2020, 01:17:24 PM
Quick update. Been enjoying the car in its current form for a couple m...
Re: Help! Removal of Rear Turbo
by 802SHO | July 02, 2020, 12:18:51 PM
Thanks to you guys for all the tips. I wasn't sure about the knuc...
Re: 2015 Ford Explorer Sport - AC Compressor Not Starting
by lotusnotes | July 02, 2020, 12:07:40 PM
So I figured this out - whoever mounted the light bar on this truck be...
Re: TASCA=Fail....
by nickstewartroc | July 02, 2020, 12:01:03 PM
I usually use tasca to look up part numbers.  And then go to my l...

Back to top
SimplePortal 2.3.5 © 2008-2012, SimplePortal