December 08, 2019, 12:58:04 AM
collapse
collapse

Author Topic: bpd1151's 2010 SHO Rebuild Thread....  (Read 12285 times)

Offline BlueSHO

  • Elite Member
  • : Crete, ILliNoIS
  • Thank You
  • -Given: 118
  • -Received: 105
  • Posts: 539
  • Ecobooster
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #75 on: November 04, 2019, 07:28:00 PM »
Looks great and finally your divorced from those clowns in MI..

Sent from my SM-G950U using Tapatalk

2016 SHO Blue Jeans
2001 Lightning
1996 Mystic Cobra

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2225
  • -Received: 2196
  • Posts: 3518
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #76 on: November 14, 2019, 11:54:50 PM »
11/15/19.......

Been a lil quiet as of late.

So I texted the machine shop owner twice for updates, and his reply is posted as a screenshot.

That reply was on Wednesday evening, and I was waiting for pics to arrive today as is stated in his message, but alas nothing came across my phone.

So figured I'd at least post up the info that he did provide me.

Moving along,  I received the new Reische 170 Thermo, as well as the custom made splitter for the front bumper and carbon fiber rods as well.

I immediately brought them over to the body shop along with my front bumper cover, and dropped both off for them to handle.

I am having them remove the near 7yr old 3M Clear Bra paint protection film which began to yellow,  and having them repair/repaint both the entire front cover (couple areas where big rocks penetrated the film and knicked the paint) as well as having them repair/repaint the existing lower front chin spoiler PRIOR TO them installing/attaching/fastening the new splitter to the spoiler.

Also having them repair/repaint the outer frames of BOTH the upper AND lower custom grilles, as those were never clear bra'd, and they each have their share of accumulated rock dings, blemishes etc.

Once all that's done, then gonna have to wait 30 days before having it all re-clear bra'd once again.

Also learned that PPE finished my pipes, and they were just shipped out today, via FedEx to JET-HOT for the next part of the process.

Also am looking into having the factory exhaust manifolds undergo a process called "extrude honing" for better flow and removing any factory imperfections. Researching vendors currently. Also placed an inquiry into JET-HOT to see if they can also apply their 2500 degree coating to the manifolds, and their heat shields.

Finally, I learned from my long time mechanic  pal/friend, that he contacted the vendor who has my trans, it's been taken apart and is undergoing inspection now to see what is what and where and blah blah blah. So that's beginning to make some progress.

Snail's pace it seems. But there's so much going on, and all in separate ways, that it's becoming challenging to keep track of.

That's it for now. Hope this finds everyone well and enjoy your upcoming Thanksgiving holiday!

Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2225
  • -Received: 2196
  • Posts: 3518
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #77 on: November 15, 2019, 01:43:17 PM »
More info and pics later this evening!

Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2225
  • -Received: 2196
  • Posts: 3518
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #78 on: November 15, 2019, 07:20:05 PM »
Ok, so I found out why the recent silence from the machine shop. I awoke this morning to more engine porn pics.

The pics were a (very pleasant) surprise, and I did not realize the shop owner had been doing this.

Extreme valve modifications. Now I have the tech info on the various degrees and what not for all of the following:

 Valves, seat cuts, back cuts, contact patches, and full radius info on exhaust seats, but I am withholding that info as I am trying to be respectful to the machine shop owner.

But pics posted below, say it all. Very obvious to even the untrained eye.

He also sent some pics over on the continued modification of the heads, individual bowls, and how they are continuing to show repeated increased flow/improvement with each/every subsequent revision.

We also chatted up about the factory exhaust manifolds. I'm consolidating the convo severely, to simply report that this same shop will be fabricating completely one off, custom manifolds. Which when done, will also be ceramic coated with the JET-HOT 2500 degree thermal coating.

HUGE DEVELOPMENT on this last part, and as far as I know, will be a platform 1st for the GEN4/GEN5 SHO.

To see the level of excitement and enthusiasm on the shop owner's face, is truly something to witness. Downright infectious and it is beginning to make me even that much more excited as things seem to finally be coming along,  after me having crapped out a lot of money the past several months.

More info and pics forthcoming as they are provided to me. Everyone enjoy your weekend!

Sent from my SM-N950U using Tapatalk
« Last Edit: November 15, 2019, 07:43:40 PM by bpd1151 »


World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline 802SHO

  • Elite Member
  • : Essex Junction Vermont
  • Thank You
  • -Given: 1788
  • -Received: 863
  • Posts: 1198
  • Boosted
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #79 on: November 16, 2019, 08:30:50 AM »
This is bad ass!  JC!  No stone left unturned!  Love it!
2010 SHO non PP, GH upgraded turbos, GH upgraded IC, EPP Hot Pipes, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous, Dicunzolo Gen2 torque mounts, SP542 .028, 160 T, Airaid Intake, 3bar, Thunderstorm Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, Derale 10000 series 16 row trans cooler, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, Aeroforce Interceptor Gauge, Tuned by AJP Turbo
Highest Trap Speed 123.22 mph
463awhp 569 awtq mustang dyno 6/13/19
PB 11.368 @ 122.68 NED 10/20/19

Offline 6500rpm

  • Quality Always Shoots Straight
  • Full Member
  • : the safe zone just outside St Louis
  • Thank You
  • -Given: 19
  • -Received: 52
  • Posts: 71
  • Ecobooster
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #80 on: November 16, 2019, 06:26:13 PM »
Of all the things you've posted, I'm looking forward to seeing what they do with the exhaust manifolds. I seem to recall the factory manifolds as being double walled and prone to delamination on the interior surface, so besides any positives in flow, the fact that you won't need to worry about fod damage to the turbos has to be a good thing. Next years going to be a trip.
2013 SHO PP in Ruby Red Metallic, GTG Billet Grills, DriveBright LED Driving/Turn Lights,160 T Stat, K&N Panel, MSD Coils, All Royal Purple Lubricants


Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2225
  • -Received: 2196
  • Posts: 3518
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #81 on: November 20, 2019, 11:41:47 AM »
11/20/19......

More pics from the machine shop arrived a lil bit ago.

Depicting the MASSIVE differences between a stock, untouched exhaust port, versus a custom, heavily modified one.

My God, even to my untrained amateur eyes, the differences are vast. Machine shop owner stated he's incredibly impressed with the new flow #'s.

Also, PPE has completed my DP's and have shipped them to JET-HOT. JET-HOT confirmed receipt and indicated they are already in processing, and have a tentative completion/ship out date of December 12th, 2019. I asked for "in progress" as well a few completion pics, and Ashley @ PPE stated that wouldn't be a problem.

Also, confirmed with machine shop owner that the new, custom, one off exhaust manifolds will *NOT* conflict with fitment as it relates to bolting up the new DP's to same. Adding that he is making custom jigs (one for each side) and developing tubular type manifolds that will completely eliminate all the hang up and poor flow of the OEM's.

So a few more updates. Little by little fellas.

Sent from my SM-N950U using Tapatalk
« Last Edit: November 20, 2019, 02:20:20 PM by bpd1151 »


World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline nickstewartroc

  • Full Member
  • : Orlando, Florida
  • Thank You
  • -Given: 6
  • -Received: 72
  • Posts: 245
  • Ecobooster
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #82 on: November 20, 2019, 01:37:49 PM »
Looking good! But are they really going to take over a year to coat them? ;)
Current:
2013 Ruby Red Flex Limited EcoBoost, Unleashed Tuned, drop in filter

Gone but not forgotten: 2011 SHO Non-PP in Black Tuxedo Metallic - Catback, DPs, Stoptech Z23s, MDesign CAI, LMS Tune

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2225
  • -Received: 2196
  • Posts: 3518
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #83 on: November 20, 2019, 02:20:49 PM »
Looking good! But are they really going to take over a year to coat them? ;)
Good catch. I fixed the year. Oops.

 I guess that tells you, at least subliminally, how much I am looking forward to 2020! Ha!



Sent from my SM-N950U using Tapatalk
« Last Edit: November 20, 2019, 03:31:09 PM by bpd1151 »


World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline southtxSHO

  • Forum Supporter!
  • Elite Member
  • : Mission TX
  • Thank You
  • -Given: 27
  • -Received: 45
  • Posts: 517
  • Ecobooster
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #84 on: November 28, 2019, 06:59:00 AM »
Wow! This is going to be an amazing build! Cant wait to see this beast running!

Sent from my SM-N975U using Tapatalk

2011 SHO non PP
LMS 4 +tune
LMS Cai
LMS catted downpipes
12.89@ 105 MPH best time @ Edinburg Raceway

Offline irondoor19

  • Sr. Member
  • : Columbus Ohio
  • Thank You
  • -Given: 71
  • -Received: 258
  • Posts: 459
  • BADSHO
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #85 on: December 03, 2019, 09:44:49 AM »
So as i am new again, Meaning with all new drive components,
any chance your Engine Guy would reproduce the exhaust manifolds
for the common man (and what be the damage for a set)?
2011 PP, Roof Spoiler, De-badged, Back Half 15% Tint, Black out Grill, EBC Stage 4 Brakes, Goodridge SS Lines, Motegi MR120 Black 20 X 9 Wheels (W 275/40ZR-20 Pirelli P Zero's) Stainless Works DP & Exhaust, ATP Turbo's, M Design CAI, 170 DEG Thermostat, Plugs, 3 Bar, 3 Aux Fan Set, Gearhead Intercooler & AJP Tuned. Running E30, Best Time this Year: 12.561 @ 111.15 "May of 2018" AND W/ DA: (12.537 @ 111.463)

2013 Police, Drop IN K&N, Back Half 15% Tint, Summer: Stock 20" Matt Black SHO Wheels "With Eagle F1 245/45 ZR20's" ...

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2225
  • -Received: 2196
  • Posts: 3518
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #86 on: December 03, 2019, 10:42:58 AM »


So as I am new again, meaning with all new drive components.
Any chance your engine guy would reproduce the exhaust manifolds
for the common man (and what would be the damage for a set)?

I will ask, after he actually fabricates a set for me. I mean after all, it would make sense (at least to me) for him to do so, as he'll have custom jigs made for each side.

I'll repost here his reply when it becomes available.

Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2225
  • -Received: 2196
  • Posts: 3518
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #87 on: December 03, 2019, 11:25:00 AM »
12/03/19......

Reached out to the machine shop today inquiring about any progress/updates.

Figured it'd be slow given the recent holiday, and likely will continue to be slow given Christmas and New Year's is quickly approaching.

I did hear from the body shop however and apparently the (several years) old 3M paint protection film was a real b*tch to remove. Took nearly a full day to do so. They also stated it peeled all the paint off. Yikes! Which was/is fine, cuz it's getting entirely re-worked/re-painted anyhow for anticipated mounting of the custom splitter. But yea, I'm not even sure if any of that product was designed to be removed anyhow.

She's being prepped for priming now.

I also will be going with an entirely new product, which is a ceramic film called "Xpel Ultimate Plus". Guaranteed to never fade/discolor for the life of the film, and also is designed in some chemical/molecular way, in order to allow removal (w/o any damage to underlying paint) if it should ever be necessary to do so.

A picture of the pamphlet is displayed. Feel free to visit their website for details.

Hope to have more (engine) porn pics for the community soon. Hope everyone's well.

Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline 802SHO

  • Elite Member
  • : Essex Junction Vermont
  • Thank You
  • -Given: 1788
  • -Received: 863
  • Posts: 1198
  • Boosted
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #88 on: December 03, 2019, 04:43:17 PM »
The clear bra/paint protection film should come off without causing damage however bc of the amount of time it was on your car (7 years?), it makes sense to me it would have been nearly bonded to the surface, but still surprising.
2010 SHO non PP, GH upgraded turbos, GH upgraded IC, EPP Hot Pipes, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous, Dicunzolo Gen2 torque mounts, SP542 .028, 160 T, Airaid Intake, 3bar, Thunderstorm Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, Derale 10000 series 16 row trans cooler, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, Aeroforce Interceptor Gauge, Tuned by AJP Turbo
Highest Trap Speed 123.22 mph
463awhp 569 awtq mustang dyno 6/13/19
PB 11.368 @ 122.68 NED 10/20/19

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2225
  • -Received: 2196
  • Posts: 3518
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #89 on: December 03, 2019, 06:17:53 PM »
Well, paint protection film has come a looooooonnnnggggg way in 7yrs time.

3M had problems with theirs, cuz from what I understand, they never formulated the adhesive for removal.

The problem is compounded when anything other than factory paint is in play. Which is/was the case w/ my front bumper cover.

A few years back, I hit the mother of all raccoons that i swear was the size of a damn miniature horse. Damn thing darted out right in front of my path of travel, as it was attempting to retrieve a discarded bag of McDonald's.

Needless to say that was its' last meal. And also meant I needed a new chin spoiler, and new front bumper cover. Which was painted aftermarket.

So umm, yea. That's it in a nutshell. l'm told the new films are made to allow removal, without damage to the substrate/underlying paint.

Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

 

* Featured Topics

* Recent Topics

Re: bpd1151's 2010 SHO Rebuild Thread....
by bpd1151 | December 07, 2019, 04:11:43 PM
12/06/19.......1st exhaust manifold jig complete.All set to now to gut...
Re: Looking for 10AMP power for BAZOOKA inside the car
by ZSHO | December 07, 2019, 03:35:40 PM
I think F21-10-amp is a dedicated not used slot under the Dash. Its lo...
2010 Taurus Intelligent Access Operation & Troubleshooting from the FSM
by SHOdded | December 07, 2019, 06:34:32 AM
Enjoy the bedtime story!...
Re: New from Louisiana
by SHOdded | December 07, 2019, 12:14:32 AM
Welcome aboard!  :D...
A little help choosing your next tire
by nForrest | December 06, 2019, 08:20:40 PM
Hey Folks,Here are a couple of links they may help you when trying dec...
Re: Not holding power in 1st gear in the cold?
by ZSHO | December 06, 2019, 07:03:17 PM
Did you recently change the starter! I hope the dealer did not screw u...
MOVED: make in hp
by ZSHO | December 06, 2019, 06:42:27 PM
This topic has been moved to Parts for Sale or Wanted.https://www.ecob...
Re: Mighty Auto Parts GDI Intake Cleaning Service
by Gjkrisa | December 06, 2019, 01:05:53 PM
The cold + fogging action keeps big chunks from breaking off.  Th...
Re: Rock Auto Closeout
by BlueSHO | December 05, 2019, 05:26:00 PM
Set of Dorman Winter STEEL 18" wheels. Z Alternate/OEM Part Numbe...
Re: Door locks
by autobahn terror | December 05, 2019, 06:30:09 AM
When I used to Live in Bavaria my 2014 SHO used to do some weird shit ...
Re: PPE Downpipes install question
by SuperPete | December 04, 2019, 04:46:12 PM
Picture attached of what I got with the pipes.Got them from jmautoraci...
Re: Articles on Lubrication
by SHOdded | December 04, 2019, 07:50:51 AM
https://www.lubrizoladditives360.com/wp-content/uploads/2016/07/Turboc...
Re: Splitter
by bpd1151 | December 04, 2019, 06:53:22 AM
Now if only you were a Texas Longhorn :DNOW only Steers and........and...
Re: Upgraded HPFP, LPFP and Stock Injectors
by Gjkrisa | December 03, 2019, 07:03:28 PM
Yeah I was just kicking around the idea of replacing them.  I the...
Re: Back to my tuning ways
by TriCoatChic | December 03, 2019, 03:55:56 PM
I have a problem. It's a need to modify every vehicle I've o...

Back to top