October 19, 2019, 06:30:51 PM
collapse
collapse

Author Topic: bpd1151's 2010 SHO Rebuild Thread....  (Read 5845 times)

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2173
  • -Received: 2134
  • Posts: 3486
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #15 on: August 02, 2019, 12:18:30 PM »
Thanks to everyone for subscribing, posting of positive comments, all the support, etc.

The road ahead is filled with challenges for sure.

Goals are set for reasons. Hopefully they can be achieved.

Been logging lots of overtime hours at work to offset current, and anticipated costs.

Given it's August, the likelihood of the car being completed this year is NOT LIKELY.

I'm hopeful though for Spring of 2020.

Fingers crossed and updates will be posted as they occur.

Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2173
  • -Received: 2134
  • Posts: 3486
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #16 on: August 09, 2019, 12:00:28 PM »
08/09/2019 --- Ordered the new PTU replacement and the Police Interceptor alternator for my SHO.

BOTH are due in early next week.

Alternator will sit and collect dust so to speak, while other aspects keep chugging along.

PTU will immediately be brought to the machine shop performing my rebuild, so that they can disassemble it, and prep it for the WPC Treatment (previously discussed) to coincide with treating the various internal engine bits.

Slow progress, but progress nonetheless.

Also have some inquiries into (possible) trans upgrades.

Trying to budget ahead of time, while continuing to submit myself to slavery type hours of overtime at my employer.

I've been blessed with more hours than I anticipated. Which is good for the pocket, but bad for the body.

Motivation's still burning strong, so ahead I forge. Hope everyone's well and enjoying their Summer.

I'm living vicariously through all of your posts about your experiences, so even though I don't reply as often as in years past, know that I'm reading each of them, and smiling.

Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline AJP turbo

  • SCT dealer and custom calibrator 3.5 ecoboost specialist
  • Elite Member
  • Thank You
  • -Given: 133
  • -Received: 1168
  • Posts: 3244
  • Log Warlock
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #17 on: August 09, 2019, 08:09:39 PM »
Stay the course mike! It will be worth it
SCT Dealer/Custom Calibrator                        
Specializing in 3.5 Ecoboost   
Remote/email custom tuning including E85 blends 
Authorized retailer for all SCT devices. 
 
Former:2014 PP SHO
3 bar 93 tune, Airaid, Stainless Works non catted DP's  
405whp/520tq
Dyno
      
Current:2016 F150 2.7 Ecoboost
Tuning in progress

Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • : New York SHO
  • Thank You
  • -Given: 1689
  • -Received: 3651
  • Posts: 2147
  • Trap Speed of almost 116 mph.
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #18 on: August 10, 2019, 03:57:20 AM »
I can truly say after all this saga bpd1151 is one Heck of a loyal Ford enthusiast to say the least!

To be fair Think SHOdded is on Top of the list for enthusiasts! Z   :)

                  

2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2173
  • -Received: 2134
  • Posts: 3486
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #19 on: August 10, 2019, 04:23:43 AM »
Thus why I STRONGLY recommended SHOdded be included as one of the staff here at EBPF so many years ago.

His dedication, as well as yours Z, have both been nothing short of exemplary.

Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline ZSHO

  • Forum Supporter
  • RotM Winner
  • Elite Member
  • *
  • : New York SHO
  • Thank You
  • -Given: 1689
  • -Received: 3651
  • Posts: 2147
  • Trap Speed of almost 116 mph.
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #20 on: August 10, 2019, 04:55:32 AM »
Amen! No credit on my end when compared to bpd1151 and SHOdded which have exemplified the Ecoboost community and platform to its fullest potential!  :thumb:  :thumb:

Don't mean to steer off course. Z
« Last Edit: August 10, 2019, 04:53:50 PM by ZSHO »

                  

2013 Performance Package SHO| Livernois Custom Methanol Tune|3-Bar Map|Reische-170-Stat|Full Race Tial-10psi BOV in Black|PPE-Gloss Black Hot Pipes|EPP Dual Intake in Gloss Black|PPE Catted DP|Corsa Sport Cat Back Exhaust|H&R Sport-Springs|CFM Performance Billet Valve Cover Breather In Gloss Black|Llumar 20%Ceramic window Tint|MSD Ignition Coils in Black|Extreme Roof Spoiler|Redline Fluids all around|Gearhead Intercooler|First-SHO With Direct Port Alky-VP-M1-100%-Methanol Injection|LMS-Custom-Dyno-Tuned @ 415whp-465wtq| Best Trap Speed of 115.54 mph|

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2173
  • -Received: 2134
  • Posts: 3486
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #21 on: August 10, 2019, 04:44:59 PM »
08/10/19 ---

Recieved a text from machine shop owner today, that the closed decking of my engine has been completed, and the block is making it's way back to his facility.

Pics perhaps by end of next week?

Sent from my SM-N950U using Tapatalk


World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2173
  • -Received: 2134
  • Posts: 3486
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #22 on: August 19, 2019, 09:55:34 AM »
08/19/19 -----

. . . . Just got these sent to me from the machine shop. Literally. Engine has returned to their facility. Full closed deck completed. Yea baby.

I asked what was next in the process, and he replied with the following (in quotes).....

"I'm waiting for the pistons, so then I can hone the block and set my piston too wall clearance. Then resurface the engine block and align hone the mains with the arp studs".

Enjoy the car porn fella's. Exciting times on the horizon.

Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline Jordan

  • Elite Member
  • : Columbia, Mo
  • Thank You
  • -Given: 172
  • -Received: 481
  • Posts: 564
  • I'm the captain of this SHIP
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #23 on: August 19, 2019, 09:59:54 AM »
Awesome steps forward!
Current World's Fastest Ecoboost SHO
11.161 @122.05 mph 9/27/19 4000DA
Fastest Trap Speed 11.193 @ 126.12mph
AJPTURBO TUNED - XDI35 HPFP, Gearhead Intercooler, Anthony Dicunzolo trans mounts, J2 Dual Intake, PPE catless downpipes, MSD coils, full exhaust, Ebay compressor wheels, and a bit of weight reduction LOL now feat. small dry shot

Offline 802SHO

  • Elite Member
  • : Essex Junction Vermont
  • Thank You
  • -Given: 1617
  • -Received: 782
  • Posts: 1124
  • Boosted
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #24 on: August 20, 2019, 03:14:35 AM »
Beast Mode x10!  Sick!
2010 SHO non PP, GH upgraded turbos, GH upgraded IC, EPP Hot Pipes, Alky Control Methonal Injection, Alky dual nozzle upgrade, Zex Nitrous 35 shot, Dicunzolo Gen2 torque mounts, SP542 .028, 160 T, Airaid Intake, 3bar, Thunderstorm Catless Downpipes, custom stainless 2.5" double xpipe w/muffler deletes 4" quad tips, UPR Dual Valve Catch Can, Derale 10000 series 16 row trans cooler, 13+ PP Trans Cooler, Econoaid throttle Body Booster, Mickey Thompson 20x9 SC-5 Wheels, Continental Extreme Contact DW tires F: 245/40/20 R: 275/35/20, H&R Springs all around w/rear cut 1/2", 1" hubcentric wheel spacers m14 1.5 stud/lug conversion, Aeroforce Interceptor Gauge, Tuned by AJP Turbo
Highest Trap Speed 123.22 mph
463awhp 569 awtq mustang dyno 6/13/19
11.526 @ 118.50 NED 10/5/19 full interior +65shot?
11.391 @ 123.22 NED 10/5/19 Driver seat +65shot?

Offline shoNoff

  • Elite Member
  • : NH
  • Thank You
  • -Given: 204
  • -Received: 621
  • Posts: 700
  • Shomu the killer whale
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #25 on: August 20, 2019, 09:48:53 AM »
Hell yea! Now that’s some impressive block work.
2013 SHO PP 12.51 @ 110.07 AJP tuned sold
2016 edge sport 13.92 @ 99.4 mph. slow and stock baby mobile

Offline limited02

  • Full Member
  • : Kansas
  • Thank You
  • -Given: 42
  • -Received: 30
  • Posts: 66
  • Hot Rod Lincoln
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #26 on: August 20, 2019, 07:44:22 PM »
Wow! My pants just got really tight...

Offline 4sfed

  • Full Member
  • : St. Louis, MO
  • Thank You
  • -Given: 94
  • -Received: 41
  • Posts: 95
  • Ecobooster
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #27 on: August 21, 2019, 04:27:07 AM »
Wow! My pants just got really tight...

I'm gonna say that, this was very funny.  ...it just didn't feel right clicking on a "like" or "thank you" button.

:D
Factory Five Mark III, 2004 Mach I donor (gone)
2003 Mustang Cobra 'vert, 456 rwhp, with mods (gone)
2002 MB C32 AMG (gone)
1997 Cobra 'vert, Vortech'd (gone)

Offline bpd1151

  • RotM Winner
  • Elite Member
  • *
  • : SHOcago S/W 'Burbs
  • Thank You
  • -Given: 2173
  • -Received: 2134
  • Posts: 3486
  • SHOGAZM
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #28 on: September 06, 2019, 08:02:16 AM »
Briefly texted with machine shop owner yesterday, 09/05/19......

He said that he has disassembled the heads, and has begun the porting and polishing.

Currently waiting on pistons to arrive. Once they do, he'll be able to begin the remaining machine work on the block.

Also, I am going to have the valve covers and intake plenum PC'd this time around. Not sure about what else to do in the visual arena as pretty much everything else is mostly out of sight.

Also, my local mechanic pal / friend is still awaiting return call from trans vendor he sourced. If that doesn't pan out, I have two other's waiting in the wings for me to call.

Just thought to provide an update. Happy Friday and hope everyone enjoys their upcoming weekend.

Oh, btw, I also asked/prompted/nudged the machine shop owner to send more engine porn pics to follow along in the process. Told him I'd appreciate seeing them, as would all of you. Forgot to add that bit.


Sent from my SM-N950U using Tapatalk



World's Highest AWHP SHO (Aug. 2014 - June 2016) & World's Fastest Ecoboost SHO to date! Details Here: http://www.dragtimes.com/Ford-Taurus-Timeslip-27985.html

Offline Dxlnt1

  • Elite Member
  • : Los Angeles, CA
  • Thank You
  • -Given: 115
  • -Received: 116
  • Posts: 642
  • SHO-NUFF
Re: bpd1151's 2010 SHO Rebuild Thread....
« Reply #29 on: September 07, 2019, 07:55:20 AM »
Mike,
When I had my my transmission problems (still do) I was considering this trans. I've read a few scattered articles and havent found anything negative but not enough positive.

http://smartpartsauto.com/automatic_transmission_6f50.html

2011 SHO, 3 Bar 93 LMS stage 4+x, ACES IV, 170 T-stat, PPE Catted DP's, Alpine Sound system, Touch screen HVAC controls, full window tint

 

* Featured Topics

* Recent Topics

Re: Possible blown PTU and or RDU?
by Gofspar | Today at 06:21:42 PM
The 2010 MKS should have the same final drive as the 2.77's in my...
Re: 10/19/2019 Capitol Raceway, MD
by StealBlueSho | Today at 04:33:09 PM
That sucks :(  How much knock did you have?  And yeah, you g...
Re: Grateful for the help I've found already!
by SHOdded | Today at 11:45:03 AM
Cool, looking forward to it :)...
Re: New member 10' EB flex. in the PNW
by SHOdded | Today at 11:43:37 AM
Welcome and congrats on the new ride!  OMG 2 years!  Time wi...
Re: New PB 11.75 Kilkare 10-17-19
by shoNoff | Today at 05:01:44 AM
  https://m.youtube.com/watch?v=FvP50_t1Ju0&feature=youtu.be&...
Re: Boost leak help
by ecoboostsho | Today at 04:15:47 AM
At least your progeny sees you spilling your blood.  Priceless :D...
Re: Welcome to the 11 Second Club!
by ridered74 | October 18, 2019, 04:32:20 PM
I bet everyone heard that sonic boom!  What was the DA for this t...
Re: 3.5 Ecostang Git-n-er-done!
by lamrith | October 18, 2019, 04:24:45 PM
Good call!https://www.ecoboostperformanceforum.com/index.php/topic,578...
Re: Catch can,air/oil seperator, vent to atmosphere?
by ZSHO | October 18, 2019, 02:30:22 PM
So you run this breather on the left side and a catch can (like JLP) o...
Re: Please take a look at my log, what do I need to record?
by SuperPete | October 18, 2019, 10:57:48 AM
Ok here you go, I saved all, but you really need to look at last 3 pul...
Re: What have you done to your Ecoboosted vehicle today?
by shoNoff | October 18, 2019, 09:38:22 AM
I agree with you on everything you said. Minus the whole kids things.I...
Re: Random thoughts for the day
by shoNoff | October 17, 2019, 04:20:48 PM
Congratulations, could not ask for a better gift :D  You will put...
Re: PIC RESTORATION IN PROGRESS, THANK YOU for your patience!!!
by SHOdded | October 17, 2019, 03:58:24 PM
Seems like you made a good choice in going with imgur!  Photobuck...
Check engine flashing, fuel smell, limp mode, and now no start
by wraitherx | October 17, 2019, 03:12:08 PM
Mazda Miata with a 30" Lift Kit.How’d you know. Lmfao. I miss my ...
Re: PPE Updated Downpipes
by sm105k | October 17, 2019, 06:05:51 AM
Thank you for confirming Z. ...

Back to top